Leaderboard

Bass demo.m4a Demo from Section of recording Never saw this day coming, but I was taking it to be defretted when I was offered my old EUB which I couldn’t resist and I need the funds. This has been used for one recording gig in November since I bought on this ere forum back in September-ish I believe? Otherwise been sat in it’s gig bag. Strung with black nylons which I think suit it nicely. The bridge piezo was removed (as is quite common with these) and replaced with a lovely Krivo mag. No feedback but still retains the woodyness when dialled in with the internal tone control. I will dig out the Spotify/iTunes link to the recording, or get a demo up. You can feel the quality of the build when played, and the nylons give it a nice upright sound. The ebony board is gert lush my babber. Looks cool as flip too! Needs to be played, not sat in a case. I am not posting this without a hard case I’m afraid. But will travel by negotiation within reasonable distance of Bath/Bristol/Bridgwater areas. I’m open to offers btw, but no trades. Specs: Factory Specification: Finish Aged Gloss Top Solid Spruce; Longitudinal Bracing Body Material Laminated Flame Maple Body Dimensions Lower Bout: 17" Upper Bout: 12.6" Waist: 10.25" Body Length: 21 Neck Material 5-pc Laminated; Hard Maple/Mahogany Neck Shape Rounded "C" shape Neck Joint Dovetail; Glued-In Scale Length 30.5" Headstock Historic Epiphone Dovewing with Pearloid "Banner" logos Headstock Inlay "Epiphone" logo in pearloid Truss Rod Dual-Action Truss Rod Cover Black PVC "Bullet"; 1-layer Fingerboard Material Ebony Frets 20 Medium Fingerboard Inlay Pearloid "Notched Diamond" Binding Body Top: 3 layer Body Back: 3 layer Fingerboard: 1-layer Nut Bone Nut Width 1.65" (42mm) Pickguard Imitation Tortoise (Installed) Hardware Aged Nickel Machine Heads Epiphone Historic Reissue Tuners with Marboloid "Crown" buttons; Improved to 18:1 ratio from vintage models Preamp eSonic™ HD (High Definition) Pickup Shadow NanoFlex™ HD; Under-saddle Power 9 Volt Battery Controls Master Volume Master EQ Pickup Selector 3-way Toggle Switch, Epiphone All-Metal; Toggle Cap, White Knobs Black Tophats with metal inserts Bridge Floating Adjustable; Ebonoid Tailpiece Epiphone Inspired By Bass Trapeze Output Jack 1/4" Saddle Compensated; Artificial Bone Strings D'Addario ETB92M Tape Wound Acoustic Bass Strings Serial Number 1930's Era Replica Soundhole Label

SOLD !!! thanks For Sale this Rare Fender Precision bass, limited edition International Series "Morocco Red". These instruments were produced between 1979 and 1981 in a limited run of particular and quite rare colors. This one has the S9 serial, I tried to check the pots, but I can't go back to the exact date, in any case the bass for my experience is 100% original and conforms to the time of construction. The bass is really very nice to play, it resonates a lot and it is a very badass rocking machine!! another thing worth noting is the weight .. 3.8 kg on my bathroom scale!!! which for an instrument of those years is something more unique than rare, which is why I would want to keep it !!! I took photos both outside and inside, the color that is very particular depending on the light can range from an orange similar to a fiesta red, to a more bright red similar to a dakota red. the neck is stable and straight.. truss rod turns easily. feel free to ask for anything else!!! i could consider trades and partial trades with other 4 string basses..

For sale this wonderful looking and sounding Warwick Corvette Limited Edition 2016. Black Korina top, Walnut body, WHITE (rare) ebony fingerboard, Nordstrand Bigman and Jazz pickups and 2 way EQ (push pull volume active/passive), rechargeable via USB (optional). MINT conditions. Comes with original leather case, masterbuilt certificates and tools.

Spector Euro 4LX in black trans finish, with some nice redish brownish accents which I have tried to capture in the photographs. Dates from 2012, so still in great shape given the age. £1350 shipped Mainland UK in flight case shown in photographs. No trades. Weight is 4.138kg Fitted with Tonerider P and J pickups. I tried many different pickup combinations in this bass as a different flavour to normal Spector EMGs and these Toneriders are by far my favourite. Note the covers are loose on these pickups so you could change to solid black pickup covers for a more traditional, sleeker look. Great overall condition, just a few minor rings as shown in photos, small scar on back of bass, some blemishing on the top of the 3rd fret area, some blemishing in the 13th fret. All fairly minor in my view and shown in photos.

*** Now Traded *** Hi Folks, Heavily modified 70s MIJ Maya Jazz 'Stealth Bass' , with John Birch pick-ups For Sale. Back in January, I was scouring the internet as you do, looking for an unusual bass to buy, and this one caught my eye on Gumtree. It's a heavily modified 70s Maya Jazz Bass (which in itself is a good thing IMHO) that has been turned into a 'Stealth Bass', complete with a body refinish in a kind of satin black (that's almost impossible to photograph), and kitted out with all black hardware, which I think looks great with the maple neck and black block inlays. The most interesting of all those mods are the two John Birch pick ups, which are not only very unusual, but super-loud and sound great! The guy I bought it from who had all the work done, said he wanted the loudest, punchiest sounding pick-ups he could find, so he chose these... There seems to be a lot of mystique around John Birch pick-ups, and I have to confess, I don't know much of the background .. But these pick ups - set up in a simple V/V/T configuration - really are quite different sounding to me.. Too my ears, they're much more like a proper vintage Thunderbird than a Jazz Bass, but there's a fab, old-skool, Motown tone to be had too from the neck pick up and, when balanced so that the bridge pick is more prominent, the sound reminds me a little of my old Wal Pro IIE basses.. I'm not 100% sure, but I think these are John Birch Hyperflux pick-ups.. See here for more details.. https://www.seymourduncan.com/blog/swd/years-ago-i-heard-of-a-company-out-of-birmingham-england-that-made-guitars-and-many-models-of-pickups-who-was-it-and-what-kind-of-pickups-did-they-make-lewis-harley-isle-of-sky-scotland And there's more info on John Birch as a luthier, and his pick up designs, here: https://en.m.wikipedia.org/wiki/John_Birch_(luthier) (I've included a couple of photos of basses fitted with John Birch pick-ups for reference..) When I bought it, the bass played well and sounded really good to my ears, but I was convinced that the bridge was slightly out of alignment. So, I took it to our very own @gary mac, who did an excellent job of moving the bridge 2mm, and giving the bass a good set up with a set of D'Addario NYXL strings... The action is set now at what I would call medium height , and the neck plays really well.. However, the truss rod is working as it should, so a lower action could definitely be achieved on this bass if required. Weight is 4.6kg (10.14 lbs). As quirky and cool as this bass is, I find myself still defaulting to either my G&L SB1 or my BC Rich Eagle when playing, so this is just not getting used.. Hence why, as part of my gear clear out, I've decided to put it up for sale. Hard to put a value on this, but it owes me the best part of £400, so I'm offering it for sale at Now Traded. Try out welcome and collection preferred from Potton, near Sandy in Bedfordshire, but postage is possible at buyers expense and risk. Please note that I don't have a case for this, but I would ensure that it is very well packaged up for shipping. Having said that, I do have a nice tweed Thomann case that could be included at an additional cost.. Any questions, please ask here or send me a PM and I'll do my best to answer them. Thanks for looking.. 😊 Nik

Facing up to the fact that as 90% of my work is unamplified gigs on upright and I can't have this sitting on a shelf... Cali 76, TX version that can run at 9V-18V. I used this on gigs a lot after first buying it and loved it, it has a few scuffs but is in very good condition overall - if you want more detailed pics of specific areas then let me know. It comes boxed with original manual and info. Asking £580 collected from Egham (minutes from M25 J13) but will also ship according to the buyer's preference. Optional extra: if you have a Noble DI then Jack made me a cable so you can run this at 18V from the Noble's 9V outlets.

I’m thinking to open an instagram page about “old basses & old tractors” 😂

For sale is my 2019 4003 in the much sort after midnight blue in mint condition the bass has had very little use and have decided to let it go it has had the original bridge removed and changed to the new Ricky bridge with access to intonation screws .It also has had the pickup cover removed and bevel insert fitted and also a Ricky thumb rest fitted all work carried out by Rickysounds it comes with the original bridge and pickup cover and unopened case case and case in the pictures you can see stereo cable which is not for sale serious buyers only please can post at buyers cost it will have to go fully insured and I will have to buy a box from hiscox to ship which will cost £25 of course collection is available the site is not allowing any more pictures to upload due to file size I can send other pictures on request

That's an absolute beauty of a bass! GLWTS 👍😊

NOW SOLD Before the introduction of the Sterling by Musicman range, OLP (Officially Licensed Product) briefly produced the MM22 bass - effectively an active budget Stingray with two humbuckers. Many OLPs have been modified to be active – this one was designed and built that way in the early 2000s. The MM22 was made in Korea, unlike its brand predecessors, and was good enough for Sterling Ball to reportedly say: ‘OLP quality was all over the board much to my disapointment… why do you think I cancelled the deal? The irony is that the last batch were made in Korea at a higher price point due to the Sub leaving the markiet and they were truly great... too good, but too late.’ My pristine example is finished in a metallic flecked grey/gold – very hard to describe but very attractive on stage. Also unlike earlier OLPs, it has a three-band EQ and five-position switching, which opens up many possibilities. On a physical level, having a second humbucker also lets habitual Fender players like me anchor their thumb, something I could never do on the three Stingrays I have previously owned. Switching options: 1. Bridge humbucker 2. Inner coils (both) 3. Both pickups 4. Outer coils (both) 5. Neck humbucker So the tonal options range from the bridge pickup’s anticipated Stingray tone through a hollow Gibson EB type sound through Bongo to Jazz (great for slap) and finally a P-like thump at the neck. If that’s not versatile... Hardware-wise, the metalwork is certainly as good as MIM Fender. The MM22 has a basswood body but also has contours, as per the ‘real thing’. But the real star of the show is the fast and very playable neck, 42mm at the nut. It has an attractive flame in it but is also lacquered – I never liked the painted US Sub neck nor did I get on with the oiled EBMM necks, so this scored with me. To cut a long story short, if you buy this you get a Stingray-esque bass for considerably less than Squier money. Its been cleaned, set up and re-strung with d’Addarios, ready to rock or funk as appropriate. Here’s a video demontrating a similar example, plus photos of the actual bass. Thanks for reading! STOP PRESS: PRICE REDUCTION TO £249

Up for sale is a super early 1982 Squier JV, serial number 03XXX complete with the big "Fender" logo these basses had before they transitioned to the bigger "Squier by Fender" logo. I was hoping to hold on to this bass for a little longer, but needs must now as I've got a wedding to pay for! The bass was modified before I bought it (Bass Lines J Pickup has been added at the bridge, the pickguard has also been modified to account for the extra pot) and while it is currently sporting a vintage DiMarzio Model P pickup in the P position and a Hipshot Detuner, both the original pickup and tuning peg will come with the bass. Pretty sure I have the original strap buttons too, although I don't know why you'd ever take the Dunlop ones off! It has a couple of dings (what bass from 1982 wouldn't?) but it all adds to the charm. Action is low, and it sounds thunderous with either flats or rounds. Super comfy weight at around 9.25lbs. The neck on this bass is an absolute dream to play. I've owned this bass for almost 10 years now IIRC and have probably only done 10 gigs on it - Most of it's time with me has been spent in a case! I have another JV (a later, non-Fender logo) that I put all the playing time on as I wanted to keep this one in as best condition as it could be. I made the transition to 5 string exclusively not long after buying it, so even more reason to keep it safely tucked away! I can take more detailed pictures should anyone want them, these are all I have on hand at the moment. It will come with a bog standard gig bag, and not the hard case in the pictures (that belongs to my Shuker 5 string P!). I wasn't quite sure what to ask for this, as other than the added J pickup, the bass can be returned to pretty much all original, and these seem to be going for quite a bit these days - especially the early "Fender" ones. If anyone feels I have priced this unfairly, I'm always open to discussing it and would welcome any input/offers by PM from serious buyers. It's a killer bass and if I didn't need the dosh, I'd be keeping it around. Lowball offers will not be entertained. Collection from Windsor preferred, although I frequently travel all over the UK so depending on your location, if it's not too far out of my way we could meet/I could deliver for a contribution towards the fuel costs. Postage very much not encouraged as I don't have a case for it, but if you wanted to buy a hard case and have it sent to me, I'd be happy to put it back in the same box and post it on to you at cost. Price is £1250, though as I said, open to discuss! Not really interested in trades this time. Thanks!