Leaderboard

To my certain recollection the term vocalist has been around for years. It may now perhaps be gaining in popularity but I prefer the term: 'the annoying bastard at the front with his idiotic music stand and his crap jokes; who arrives last, leaves first and seldom buys a round; the man whose wife is in a permanent state of (i) illness (ii) vexation (iii) pregnancy; he who never scores a gig except free gigs; and his stupid hat.'

*whispers* Do it.. kill rock and roll, kill it.. go on.. kill it

I've been known to press the 'Post EQ' button after he's plugged it into my amp

I interviewed Frank some years ago along with David Ellefson and I have to say that they are both super nice guys. Really down to earth and chatty. You'd be forgiven for thinking you were just hanging out with a fellow BassChatter. Frank even got me a beer.

Not that it's my choice to make but I agree that the plain tops complement the burl top best. Do you have a position marker on them? (Thanks for the change of background) Andy, I'd go for a W shaped F hole and patent it PDQ. It looks like Norris is a little sensitive about his norrisole. Norris, I've now got a design for a hole shaped like a Cumberland sausage but I've got nowhere left to put the chuffing bridge! I hope you're happy with yourself.

Oh, they are compulsory to try As is the vanderkley cab and EICH 1000w head... Heheh...

Luckily I have a two-gig weekend that's going to keep me occupied. Otherwise, like a poorly-trained spaniel, I'd be chewing up the furniture. Seriously though, when I asked Andy to make me the bass the idea was always 'when it's done, it's done'. No time constraints.

The end is in sight? Neil will be struggling with "Is it done yet?" for the next few days....

Well - I'm out of excuses now...tomorrow is final sanding day and finishing starts at the weekend. The last job was to set the bridge at its final height, and that allows me to see how much leeway I have for the final curve of the top. It's not critical, but I would like the bridge plate to be at least partially sunken into the top and, ideally, flush. It makes no difference to the functionality, but I want to avoid the look of some bridges where they appear to be a bit of an afterthought. I used a Dremel precision router for the flatness and finished the edges with chisels. Like the pickup routs, I did the curved front corners with a 5mm drill, drilled to final depth, before routing the bulk out : That gives me a nice close fit and looks like it is supposed to be there: This done, it lets me pencil the 'flush level'... ...so I can see how deep to sand. The aim will be flush at the leading edge and curving down a touch to expose the bridge plate progressively towards the tailstock. I'm hoping that the weather stays dry tomorrow as it is a lot easier to do the final sand outside - especially when looking for sanding marks, glue overspill and unwanted dints. The Osmo has arrived so, all being well, I should be able to apply the first couple of sealing coats as well before the start of the weekend

Thanks Geoff,your lessons and videos were a big help when I got my EUB and now I'm reviewing some of them as I work on proper techniques for the DB...and having lots of fun too!

Despite being one of the bands I have seen the most times I still have to remind myself that David J of Bauhaus played fretless. One of the pleasures of old age this not remembering lark...

That`s why I always connect the DI cable to my Sansamp - a straight bass sound would decimate the sound of our band, much the same way as getting the guitarist to play his Les Paul with no gain.

That is the difference between musicians that have to work for their living and pampered over produced pop stars who think the sun shines out of their behinds because someone else wrote a hit song for them... .bit like footballers vs rugby players.

Bluejay, that is exactly the first thing that came to my mind! Reyalpssabginkcufecin! (one for the Anthrax fans there)

Compared to the hollowbody beauty above, my short scale is somewhat simple, yet a nice piece of candy... Fender Pawn Shop Bass VI, I got it in a trade two days ago. Nice piece! Makes a fine contrastb to my other "real" basses...

It's part of the lyrics for the song Angel Delight. Played by Dave Pegg, as with virtually every Fairport recording, on his trusty Fender Precision. The Ibanez is a recent acquisition.

This reminds me of my first bass from 1993 or so! Unfortunately, it was a dog - heavier than a Trace Elliot amp, with what appeared to be a ply-like neck! It was a 1969 Kay. Terrible. Yours looks great though! I’m getting all sentimental now - might go looking for a looky likey...

No..!

Now you tell me!!!!! 😮

Here are the plain knobs - they will lighten a touch when the oil has dried. @SpondonBassed - please note that I SOMETIMES take notice of what you say ref the background The comparison is here: Personally, I prefer the plainer ones on the actual bass - my eye is drawn to the top and not the knobs - but, whatever, Neil will be given both sets

Well it has taken a while, but I've finally had time to give my Burns Barracuda Bass a proper work out including a rehearsal with the band. First the obligatory photos: While it shares a lot in common with the Squier being a Bass VI, in many ways it is a very different instrument, especially when it comes to the pickups and electrics. The wider neck is much more comfortable for me than the narrow Squier. However it is not as wide as the specifications would lead you to believe. Nut width is 45mm, but the actual string spacing between the two E strings is only 38mm, a mere 3mm more than the Squier, and the strings are very obviously set in from the fingerboard edges. The difference is enough to make the neck feel more comfortable overall, but if the string spacing made full use of the available nut width, it would be even more useful to me. The fingerboard is bound in fake MoP which looks great, but doesn't make the dots particularly easy to see in subdued lighting conditions - as I discovered the first time I took this bass into the rehearsal room. At the other end things are less good. The overall string spacing at the bridge is only 52mm compared with 55mm on the Squier, so while it is easier to form chord shapes on the neck without inadvertently muting strings with my fingers, picking the correct string cleanly is a lot harder. For the first week I was constantly missing strings or playing the wrong one. This is one of the problems when the hardware for a Bass VI has been appropriated from a guitar design. The Squier Bass VI might look like it's been cobbled together from bits left over from the Fender Jaguar, but all the important parts have been suitably altered to suit the nature of the instrument. The bridge on the Barracuda appears to be exactly the same as that on the Marvin Guitar and consequently the spacing here is really a bit too narrow for a Bass VI. The relatively narrow bridge also means that the outer string get further way from the edge of the fingerboard as you move up the neck. On the other hand the vibrato mechanism is a lot more useful than the one on the Squier. It's smoother feeling has a noticeable effect on all the strings and has less of a tendency to put the instrument out of tune. Overall the Barracuda is (for me) easier to play than the Squier, but it really needs to have a correspondingly wider string spacing at the bridge to match that of the nut for optimum comfort. The other interesting thing is that despite looking bigger and chunkier than the Squier Bass VI, both basses weigh the same (4.3kg on my scales) the Barracuda feels lighter on the strap and is definitely more comfortable to wear for a 2-3 hour rehearsal. When it come to the pickups and electronics there's a lot more variation between the Barracuda and the Squier Bass VI. The Barracuda has a standard Strat-type pickup selector with the conventional 5 options. However pulling up the tone control nearest the jack socket automatically activates the neck pick up irrespective of the position of the 5-way switch. I was a bit worried that the "in-between" pickup positions might sound a bit weedy, put while there is some thinning of tone, it's all very usable and all the positions work well in a band mix. At the moment I'm favouring either the bridge or middle pickup solo'd or the bridge and neck pickups together depending on the band mix. What is much better than the Squier is that the instrument has a lot of clarity without it being at the expense of the bottom end. To that end if you want to be playing surf-style bass this could well be the bass for you. There's plenty of twang and oomph available, and at the same time should it be required. As you can probably tell, while the Burns Barracuda still isn't ideal for me it's a lot more suitable than the Squier Bass VI. It is usable straight out of the case (it comes with a rather nice Burns branded hard case) without needing to shim the neck or replace the strings, and the bridge/vibrato unit while not being as wide as would be ideal is overall a lot more suitable for a bass instrument than the Squier. I think this bass will be fine for me at the moment, until I can afford to have something mode more specifically for my needs.

I’ve got the remastered (most recent remaster - there’s been a couple) of LED Zeppelin II and IV on vinyl and they sound awesome; much better than the originals in terms of mix clarity and dynamics. I think if they’re done well then it’s a ‘no harm, no foul’ situation.

Even with the import duty & electrical problem, that's a bargain. Lovely example of vintage MIJ class, that's a Fujigen Gakki build, like Ibanez of the same era & MIJ Fenders & Squiers. Since this is turning into a MIJ P copy love-in, here are my two: Daion Performer, from around 1980-ish, made by Yamaki Gakki: Ibanez 2366B, Fujigen Gakki, from 1972-73 as far as I can work out: Both lovely basses - but I don't really play Precisions so I certainly don't need two! Anyone want a very old, very, very rare Ibanez?

Wow. No biggie, I recognise your tone from some of the "sales assistants" in multiple shops that ultimately went bust due to lack of customer loyalty as a result of awful customer service😁

Yes, that is the attitude that a lot of music shops had when I was young many years ago, and why no-one was that worried when a lot of them closed down.

(You gotta compared and contrast, right?)

Maybe they don't spend enough time worrying and debating these important terminological distinctions , typical vocalist attitude , singers would care 😁

More fancy basses on their FB page. https://www.facebook.com/dtcbass/

I'll not be doing the woodwork I've been there and done that, and i should never be let near bass modding ever again 👀

always loved Bobby Vega

I was feeding my zoom B3 into the return on my amp and it sounded amazing - I’m able to tune the B3 to what I want far better than straight into an amp - made me wonder again if I really need an amp and just get a FRFR pa speaker

I've always liked Erroll Garner's 'Misty', and am still working on it; have been for a few decades, now. One day, maybe... Good luck with the audition; the French use the 'mot de Cambronne' for these occasions. The British say 'Break a leg'.

this and/or the di out the front of the hartke - they 'assume' it is clean/pre but are blissfully unaware of the pre/post button on the back

He is an absolutely furious player but I still don't 'feel' his voice as a player. I had thought that, when he exploded into the scene a decade ago, that this was something that would develop in time. I'm no stranger to fast bebop lines and fusion playing but Hadrien's playing still misses the mark with me, a lot of the time. Perhaps part of the problem is that, unlike the fusion greats who established themselves a few years ago, he hasn't really been in an amazing band with other bandmates to bring him up. His tenure with McLaughlin was pretty short and he hasn't had the launchpad of a UZEB, Bruford or Weather Report type outfit in which to really develop as a band player.

This is a little known fact but the reason her words seem to end like that is because on the recorded versions every time she opened her mouth one of the crew teabaged her so it's not really her fault is it lol

The Libertines were, are and forever will be utter gash. The fuss over Winehouse has been one of the most bemusing things in music. Back to Black is wafer thin ersatz 60s Dusty Springfield type pop updated for the millennium, produced by the most overrated producer ever. Stand up Mark Ronson. Just an opinion of course.

Andy Fraser’s solo on Mr Big from the Free Live album; not technically difficult, but superb build and note choice.

Musicians are a nightmare. I mean other musicians are a nightmare

Yeah the 40th edition of Never Mind The Bollocks is on my radar but at nearly £40 I`m a bit reluctant. It is my fave album of all time tho, so maybe I should.

Here you go good Sir; https://www.dropbox.com/s/q2hsody1salb1my/BassChat Podcast - Pilot.mp3?dl=0

Change one thing at a time.

And they're done, barring another couple of coats of finish:

I acquire this incredible instrument recently in a trade. Quite simply on of the finest instruments I have owned and I have owned many! Build quality, tone and versatility are second to none. Controls are master vol w/push-pull act/pass, blend, passive tone, stacked bass/treble w/push-pull EQ bypass(so you can have active pups but no EQ - more useful than you may think), mid. Specs: Model Antía. 5 strings. Scale Length 32" Space between strings 0,669"/17mm Nut 45mm Finish Gloss varnish Olive Top Mahogany hollow body design Maple-Padauk-Wengé Neck Ebony AAA Fingerboard ETS Bridge with Piezo Fingerboard Radius: 9.5" Approximate weight 3.75kg Markers Side dots Aguilar DCB Pickup Richter electronics Security Straplocks Hipshot HB6Y Ultralite Tuners

They know and recognise me as someone who has spent a lot in there over the years, probably £5k to date and I've also sold stuff to staff. It was reasonably busy but it's not a customer's job to convince a shop and it's staff that they're worthy of being welcome. Everyone is a potential customer when you are running a business whether they spend today, tomorrow or years down the line. If they're having a bad day then they need to be professional and suck it up a bit like the rest of us in our professional lives.