Leaderboard

I picked this up cheap because it's in a bit of a state and I felt sorry for it. It's not a particularly common bass around these parts, so I figured I could get it back to being hale and hearty again. It's pretty dirty - the tuners are green in places and I had to wash my hands after stringing this bad boy back up - boak! But that's just dirt. The main issue with this bass is the neck pickup. The coil windings have been... interrupted shall we say. Thankfully most of the coil is intact, the break is pretty close to the beginning/end of the coil so I'm going to try to unwind it slightly back to good wire then solder it back up and see if that works, failing that I guess I'll need to get it rewound. A wee project for the weeks ahead. Its mostly cleaning and polishing, the pickup to attempt to repair, and maybe some finish repair on a couple of nasty chips in the neck finish. Dunno if it's worth a build diary, so I'll probably just document my progress here. FWIW, the remaining pickup sounded pretty decent in my wee Laney 30W combo in the office here. For all the dings/dents/scuffs/scrapes/lacquer cracks, the bones appear to be solid and it feels quite nice to play. I think with a bit of work this will end up being a fine counterpoint to my BB1200.

Bingo! “Bigredx mentioning Gus in a completely unrelated thread” was the last thing I needed for the Basschat bingo game.

Well I did it! We went to view an AH300 tonight. I took my fretless jazz to try it and it sounded fantastic! Lovely condition, and it came with original manuals, sales receipt and the pedal board. Flippin' heavy though. Sadly my partner bought it for me for Christmas so no playing with it for a few weeks. ☹️ I have a couple of questions - did the 15" cabinets not have Trace Elliot badges? There's no sign it ever had one. Also the electro fluorescent front panel doesn't work, the seller said he thought it was deliberately disconnected, so that's something to look at. Any suggestions where to start with that? Anyway thanks for all the advice and opinions, I'm very happy with it! 😊

Yes, an Aria TSB 400 in the pic attached. My first bass bought second hand in 1988.

Picked this up yesterday for the website, man it's a beauty. Wilcock basses are killer. Im starting to warm to shorty's recently after not understanding the hype for them.

Streaming definitely benefits my band. It allows us to reach listeners all over the world. About 90% of our listeners are from outside of the UK. For better or worse it's where the majority of most artist's potential audience are. These days it costs next to nothing to be on streaming services, so why wouldn't you be there? Does it give a fair payout? How do you even begin to quantify that? Let's look at the "good old days" of record companies, albums and CDs... A new signed band might get 10% of the retail price of the record or CD, But that only came after they had paid off their advance, recording costs (often to a studio owned by the label), promotional costs like buying onto a major artist tour, making videos, paying photographers, record pluggers and all the publicity that a band with a record contract in the 20th century would have taken for granted. They would also have to sign with the record labels publishing company who would take one third of all their performance royalties. Most bands would never see any money other than what the label initially advanced them. And that was only for the very lucky few who actually got signed. If you were going to put out your own record, in the late 70s if you cut every corner possible like The Desperate Bicycles you could record and press 500 copies of your single for just under £200. Back then it took at least 3 months to get your records after you had sent them off to be pressed. If you were lucky and John Peel liked it enough to play it more than once and Rough Trade gave you a distribution deal and you sold all the copies, you could probably afford to make a second single and not have to cut every corner this time. Or if you were unlucky like my friend's band it could take the best part of a year from making the initial recording to getting your 500 copies of the single and then your distributor would go bust taking all of your stock with them never to be seen again. On the other hand streaming probably won't make any of the artists being streamed rich on its own, but if you do it right you should at the very least make back your aggregator's fees. Your music will be available for as long as the streaming service is running. Yes Bandcamp give you 90% of your download and physical product sales, but their reach is tiny compared with Spotify or Apple Music or Amazon. IME the people who do badly out of streaming do so because either they have signed a deal that gives someone else (usually their record label) the majority of their streaming income, or because they don't do enough promotion. The conservative estimate is that 20,000 new songs are uploaded EVERY DAY. So when you release your next single not only do you have to compete with the other 19,999+ songs released that day but you also have to compete with almost every other song ever released in the history of popular music. The charts (for what they are worth these days) have to apply negative weighting to back catalogue otherwise new artist would barely get a look in. So if you can't/won't promote your music how can you ever expect to reach an audience of more than your close friends and family? For me the short answer is that while I'm almost never going to make a living out of my music, at the moment my band breaks even overall in terms of what it cost us to be a band and what we make from playing gigs and having our music available to listen to or buy in various formats. And while it isn't a massive proportion of the band's overall income it makes an important contribution.

Best purchases: A beautiful Spector Euro CST (Jap ltd version) in desert island blueburst, imported from Japan with the assistance of Bass Japan Direct.: My old Charvel 3B, which I bought back after stupidly selling 15 years ago... and now upgraded with EMG-X pickups. The fantastic LHZ HL-1 HAZard LAMPS preamp pedal. The sound of a classic US Spector Haz Labs preamp in pedal form. Brings all non-Haz loaded basses to life, particularly passive basses! and last, but certainly not least(!!) the amazing LFSys Monaco 600W 8ohm bass cab courtesy of @stevie. Lightweight, punchy, authoritative and loud... with wonderful dispersion. Worst purchases.... none that I can think of. I like to do my research before parting with moolah.... 😉👍

Damn, I was still waiting for "Leo got it right first time".

I'm not getting into discussion of room modes (the collection of resonances in a particular space) here. It merits it's own seperate discussion and is probably better suited to being in the PA section or studio recording. Science works by isolating single variables and investigating and understanding them one at a time. In this little bit all I wanted to do was explain a simple phenomenon which we've all experienced and can easily rectify. It's more psychoacoustics than physics. Maybe a bit of biology. Most of our lives are lived at modest sound levels (70-80db) and the frequencies that are most important for daily living are in the mid-range. The quieter it gets the more the mids are boosted in our brains. If we listen to music quietly we need to add a bit of 'loudness' or the balance sounds weedy. Bassists in particular need to know of the opposite effect; if we increase the volume above the 80db range then we need to apply anti-loudness, to boost the mids and cut bass (treble in this case is outside of the range of a bass guitar). This will restore the tonal balance that you have set up so carefully at home or in the rehearsal room. This is the bit you as a bassist are in sole charge of. This is about preserving your own tone It's the job of whoever is in charge of the PA to deal with room resonances (or room modes), though in a really awful room they might need you to help out by turning down or reducing you lower frequencies especially if you are using backline only for bass.

Even Jaco needed a P......

Bi Carb - sprinkle liberally then leave for 24 - 48 hrs, then vacuum out Bi Carb should absorb the damp and associated smell.

But without the Internet, how will you tell strangers they don't need the Internet?

Baffle cut and cab screwed together,( will glue and screw when happy everything fits ) Back panel cut , just need to wait for when the neighbours are out to check for any buzzing or rattles .

Holy Mother of Overkill.

A day using the spray booth and I think I’m getting better lol. Walnut, Paulownia and Sapele.

I’ve heard some people have had some success using cat litter ( unused, before the comments roll in…)

You must consider them along with the rest, as the final result is the sum of all the parts. Another consideration is boundary cancellations, which occur when the distance from the speaker to a boundary is 1/4 wavelength, and/or when the difference in the distance from the speaker to a boundary to the listener totals 1/2 wavelength. These cancellations typically are manifested relatively close to the speaker, which is to say on the stage. They diminish as you get further away. It's why your on stage sound can seem bass weak while it's too much in the audience. It's the source of the myth of wave propagation, the notion that one must be a certain distance from the source for a low frequency wave for the dB level to reach its full potential. Accounting for it and the rest is why you need to do a sound check standing where it matters most, in the audience, or as close to it as possible, when setting your EQ. As often as not perfect tone on stage can be boomy out front.

How about my Fender telecaster with matching strings! They also came in pink I seem to remember! Made in Japan probably early 2000's I used it in a blues trio with it tuned down a tone as a lot of our tunes were in D and I wanted that low root note. Played through an Ashdown ABM500 with 1 by 15 and 2 by 10 cabs.

Still looking like I can attend. I'll probably only be able to bring my Warwick Triumph EUB as I don't think I can fit that plus a DB and 1x12 cab(*) in the boot, though I might be lucky. (*) Orange OBC 112 with Orange Terror and TC Electronics BAM 200.

This tallies with my experience: when I mostly played live, I quickly realised the mids were key to the bass having any presence in the mix. If it was a shared/house bass amp, my first order of business was to find any kind of pre-shape/contour/enhance control and turn it right off! Otherwise it was all clacky treble frequencies and deep bass that got in the way of the kick drum. Conversely, as I shifted more to recording music, I realised I could take a lot more mids out without losing the "detail" of the bass tone - and actually get back some clarity. (And believe me, after all those gigs, it took quite a leap of faith for me to turn the mid controls down!)

Agree, quite often those in the mix rich warm tones are, when isolated, middy, scratchy, gainy and clanky.

Glad to be of assistance. Now where's my share of the prize money?

I know that's said in jest, but the main reason I never recorded with it was because it wasn't as effortless to play as this: or this: Neither of which are remotely like a P-bass in looks feel or sound. (and for a lot of the songs I was playing it didn't have enough strings)

This appears to have one but it may have been added by the owner. https://www.ebay.co.uk/itm/306528129319 TBH I can't remember many cabs having them back in the day, or if they did they didn't retain them for long. I guess many badges were rattled loose by the monster tones and left lying on a stage floor somewhere, probably out of reach of the now crippled owner who'd had to get the cab out of the venue into the van.

I think I'm going to make it through the whole year! Wow!

From the the golden age of Japanese-made instruments.Yamaha basses from this era are a combination of bulletproof construction and top-class design. Well-worth trying to resurrect.

My regularly-gigged MIJ Fender Mustang. I like it because it is light, sounds great and is easy to play. Had it for about 8 years. Unintended benefit of a short-scale: it takes up less room on a tight stage. I occasionally get out the guitar it has replaced; a 1978 Ric 4001, play it for a wee while and then put it away again.

Shake n vac to put the freshness back, remember that 🤓

Nah, I bet he overplayed a mush of too many notes on it 😜

There are many branches of Physics, and some can be detrimental where understanding acoustics is concerned. The main obstacle for most, irrespective of their level of education, is realizing that sound waves and light or radio frequency waves are totally different in how they function. Light waves in particular are easy to comprehend, because you can see them. There is almost nothing intuitive about how sound waves work, and even at the post-graduate level there are few courses of study available. One very good source is here: https://blog.soton.ac.uk/soundwaves/

I think what we can't be clear about with this bass, is whether this is a problem that's developed over the years, or whether it's always been like this. This is a Korean-made bass from the late 70s, a time when factories like Samick (who made this) & Cort were upping their games but still not achieving the QC of the more established manufacturers. I've had a few Korean-made through-neck basses from this era which had unadjustably high actions simply because they came out of the factory that way, rather than deterioration. Here's a Samick-made Satellite I had, which some previous owner's corrected by routing the bridge about 5mm into the body: I think before suggesting any remedial action with the SD Curlee, I'd need to know whether we're correcting an age-related problem, or a manufacturing flaw. I wouldn't be surprised if it was the former.

Just like my very recent transaction with Mick too. As evidenced by the very quick and safe arrival of the Dennis Dunaway book today that I purchased just a few days ago. Thanks Mick - I'm looking forward to a good read! 👍😊

I am in my mid 50s. The days of frequenting random gigs mid week are 30 years behind me. The generation that you need for that are teenagers to mid twenties and like it or not they get their information from the digital space.

My unscientific measurement suggests that the string spacing at the bridge of my AGBR200 is 18.5mm with an overall width (outer edge of string to outer edge of string) of 57.5mm.

link to album - other streaming services are available

I always suspected Julia Hofer was classically trained in some way, shape or form. Now I find out she's a Cellist like me. Interesting performance, too...

If you look at the pictures, you will see that the bridge sits on the neck extension: the two front screws and 3 of the 5 tail-end bridge screw holes are on it (I didn't say it was a thru-neck).

They’re brilliant instruments with some serious pedigree, and mostly pretty inexpensive, unless you’re going for a high-end TRB or something. Plenty of used ones out there too, and they’re almost all excellent. You don’t hear about too many big-name players using them these days - they’ve got the same people they’ve had for years, like Nathan East, Patitucci, Sheehan, Hooky, etc but never really seem to add anyone new to their roster of endorsees. I guess they go for quality over quantity. You do seem to see quite a lot of them in the hands of session guys though. Those who know, know.

I thought I would have a go at some early Joe Jackson songs, started on Different For Girls, lovely tune and reasonably easy to learn. The next one was Stepping Out, flippin eck, this is way beyond my capabilities, bass players must get a real feeling of satisfaction when they crack this one.

Thanks guys. I'm going to get everything ready to assemble the bass then do the body. I'm fitting a rosewood neck from a '95 Mex P bass, pre-CBS Gotoh tuners, Fender hi-mass bridge, Aerodyne PJ pickups and just using chrome knobs as the control cavity is rear routed. I've got a solderless Jazz bass harness as I'm useless at soldering! Once I have things more organised I'll start a build thread. Cheers Paul

Long scale? Epiphone Jack Casady. *mic drop*

Just had some work done on my 2001 Warwick Thumb BO by Jon Shuker. Neck reprofiled, frets levelled and dressed and a brass nut fitted. This man works wonders. If you need any work done on your bass I can highly recommend that you take it to him.

I know I bang on about this on here, but, unless you are running bass through the PA, onstage sound is less important than in-room sound. What sounds good when you stand next to your rig can be terrible out in the room. The classic mid-scooped tone with a little low and high end lift can sound like mud in the room. I often find I have to lose some low end and boost the mids to the point where it gets a bit honky for it to work in the mix and in the room. Sound-checking with a long lead or wireless can be very revealing.