Jump to content
Why become a member? ×

Leaderboard

Popular Content

Showing content with the highest reputation on 25/10/21 in Posts

  1. Up for sale is my utterly immaculate 2003-04 Crafted In Japan Fender Precision in slightly rare Daphne Blue finish. As far as I can tell there are no marks on it at all. I just remembered that when I re-strung it that the pickups have base plates and the pickguard hole positions are not standard so as far as I know it is a 70s reissue (I've since found out that it's definitely a non export 70s reissue). It's all original and benefits from a recent full set up; fret level, crown and polish, relief set, new 100-40 round wounds, action and intonation set and a fretboard lemon oil treatment. The vital stats are 40mm at the nut, 4.2 kg and it comes in an also immaculate TGI hard case. I took this in exchange from BriansBrew of this very parish but now, due to GAS striking me again, I'll have to sell it. Happy to ship it anywhere. Can also deliver within the NW or can drive to meet up within 70 miles or so from the Wirral. Thanks for looking
    9 points
  2. I acquired this case in a recent bass purchase here on BC and I don't have room for it. It's an old tweed case, no brand name, with Jeff Duncan's name on one side and on the inside of the lid of the internal storage. The locks seem to work OK but I don't have any keys for it. The outside is "road worn", to put it politely, but the inside is ok. If you are called Jeff Duncan and can prove it, you can have this for £10. For anyone else, it's £5. 🙂 Collection from South Croydon preferred.
    8 points
  3. When a bit of cash in my wallet from a few recent pub and party gigs meets a very tempting listing on a local Facebook page this is what happens. A Mexican made Mustang, a very subtle sonic blue. Plus an alternative pickguard. Even the cat looks smitten 🤩
    8 points
  4. I'm putting this exotic and extremely rare beast up for sale as I'm not really a fretless player and got it for a one-off project. Price is less than half of what it cost and therefore firm. It's impossible to overstate just how impressive these unique, UK-made electro-acoustic basses are - IMHO nothing else comes close and other owners say the same. Suffice to say that, at the 2019 Summer NAMM in Nashville, Bass Gear mag declared the Contour 'Best Bass in Show' despite never even having heard of Gillett Guitars before they visited the company's stand! This one is in excellent condition with only a few faint witness marks showing it's used - nothing you could call a ding, scratch or scuff. Price includes a reasonably durable gig bag and I'd strongly prefer either for the buyer to collect (we're 10 min's from J25 M5) or meet me for handover somewhere between Bristol and Exeter. However, if a buyer insists on shipping (UK only) and is willing to arrange/pay for carriage, I will look at getting a hard case at extra cost. Here's a short-list of key features: Rosewood body; maple ‘C’-section neck — 41mm (1.6”) at nut, 54mm (2.13”) at 12th fret; sculpted ergonomic recesses for fore-arm and rib-cage/beer gut; single active neck pick-up; thru-body stringing; adjustable nut; medium scale length = 31.75"; weight = 3.75kg.
    6 points
  5. I used a lot of Trace gear back in the day, but I don't ever remember seeing a combo in this configuration before. Built like a tank, and weighing like one too, no doubt!
    6 points
  6. Just got these pre-delivery pics from Luthiers Warehouse... Jazz Body, with a twist!.. (or P Body with a Squash!..) Rear Route, PJ, Slanty Pickups... So a bit Reggie Hamilton, bit Aerodyne, bit Black Top, bit Jazz Special PJ535... Seed was planted when @Duarte posted a pic of a PJ535 in need of a fix in his Vintage P Makeover thread... so it's all his fault! Body to join the Maple 'n Blocks Neck... And Odds 'n Sods from the 'Dark Materials' thread... What do you recon? I was happy with my Rear Route P body so went for a bit more of a 'One-Off'... took a week or so longer than expected, but they are real helpful. So if ya just want a normal-ish body or have 'Special Needs' like me drop Luthiers Warehouse a line! https://www.ebay.co.uk/str/luthiers-warehouse
    6 points
  7. My main reaction is surprise that moving to full UK production results in such a relatively small price increase.
    6 points
  8. WOW ... The pumpkin trails are set out and with an increasing number of houses being decorated with spiders webs and skellingtons , it can only mean one thing ... we are approaching the end of October and that in turn brings the obvious conclusion that ....... its the October Composition Challenge voting thread The compositions are based on this picture , chosen by last months winner @Doctor J and they are really worth a listen over the week Choose your favourite 3 tracks The Basschat force was strong with this picture as you will hear in due course .......... 1 @Dad3353 Taking stock, reflection, inspired by the (apparently...) more simple life led by (apparently...) more serene sentient creatures. Are they telling us something..? Can sentiments be transmitted..? Yes, they can (apparently...). 2 @NickD Finally some time! Crap weather and no diesel cut me a little slack this month. 3 @Doctor J This looks like the sub-aquatic future which seemingly awaits us on our unstoppable journey into oblivion. Do electric trains run underwater? 4 @Nail Soup The pic got me thinking about swimming with dolphins and generally drifting around, which gave me the feel for the song. I was recently loaned a beautiful mid-70’s Gibson Thunderbird acoustic guitar by my aunt, which belonged to my late uncle who passed last year. She wants it to be played. So it’s included here and contributed to the feel. 5 @Leonard Smalls I fancied a bit of Dub, so here it is! Sounds best on big speakers with serious bass handling... 6 Lurksalot I saw this a journey which obviously has choices of destination and timing to a degree , you can go when and where you want to. A fairly simple thought on journeys in general. 7 @upside downer Hello, I'm Johnny Trash. The image brought to mind the rising sea levels and the consequences of climate change. However, I'm a glass half full kind of guy and that struck me as far too morose so instead I went with a country tinged toe-tapper about a train trip gone awry and the narrator more worried about his lack of Adam Peatyesque prowess and getting to his journey's end. Where was he hoping to get to, though? 8 @skankdelvar A dab behind the ears with some eau de Canvey. Well that's it , nothing too scary, but the voting will close at midnight on Halloween so choose your favourite 3 tracks good luck to all , and well done , they are a great listen .
    5 points
  9. Got this email this morning - looks like a great idea. https://www.stringsdirect.co.uk/newsletter/preview/649/16535
    5 points
  10. If you're an unlined fretless sort of person and would like a Sire, then simply ask for one. Having written to Sire asking if they do them I've just got a reply saying they'd never thought of it but will consider making one now I've raised the thought. If you fancy reinforcing the idea in their minds, email [email protected].
    5 points
  11. I fancy doing a prog version of it. 4h 33m, it'll be called.
    5 points
  12. A dab behind the ears with some eau de Canvey. (Edit: Better version further down the page). Lyrics ↓
    5 points
  13. Hi, I'm selling this gorgeous G&L LB 100.. This is a lovely playing and sounding Bass, nice and light at 7.4 pounds. The Bass is in very good condition apart from a scratch on the back which isn't bad "Please See Picture" The Bass comes with it's original paper work and hard case. Price includes shipping "UK ONLY" No trades.. Cheers..
    4 points
  14. I wanted my first post to be a series one so I will do my best. This is what I have seen to be true about English made basses. If you look down the fingerboard from the bridge to the nut the E and A strings can only down chromatically and the D and G can only go up chromatically. That is why English Basses can only be played from the right side. This is also why they are not imported to the America’s. Flat wound strings are for Apartment use only. The first bass played by James Bond ( Sean Connery) in the Sixties, was a double 0 fret model with 7 strings, made by Q Branch. Last but not least, all the valuables in the Tower of London are provided on loan by the bass players from Def Leppard, The Stones, Moody Blues and Led Zeppelin. thought I would let you know.
    4 points
  15. Might be worth asking Seymour, they may be related. He may even be able to arrange a pickup.
    4 points
  16. Sounds like a detective novel: The mysterious case of Jeff Duncan.
    4 points
  17. I’m Jeff Duncan and so’s my wife…..
    4 points
  18. Can I just say that's the best casual gig name-drop I've come across in years? I was expecting the Lochboisdale Hotel... 🙂
    4 points
  19. In general I’m happy to pay more for stuff made in the UK. Good on ‘em
    3 points
  20. I'm called Duncan but I don't know who effin Jeff is. Neither do I want the case. How much will it cost for you not to sell it to me without postage then? Fully insured of course.
    3 points
  21. Is that the Jeff who started a doughnut chain?
    3 points
  22. Up for sale is a very beautiful Sei Flamboyant. I had grabbed it from here basschat marketplace. Unfortunately I don't play bass that much anymore. I will go back to one bass and I am more of a jazz bass guy. I am willing to trade this with a high-end jazz like Sadowsky, USA Lakland, Fclef something on that league. I would be really interested in a USA Lakland jazz. Specs are: - 34 scale - 1.5 inch nut - Ash body - 24 fret maple/bubinga seven piece neck - Ebony fretboard - Madrone burl (Strawberry wood) top and peghead veneers (Stunning) - Kent Armstrong pick-ups - Aiguilar OPB3 preamp 18V push/pull midrange sweep - ABM bridge - Gotoh tuners - Very light 3.5 kg - Lovely slim profile neck (Fastest neck I have ever played) The bass is in immaculate condition as can be seen in the pics. It comes with a hardcase. I am located in Eindhoven Netherlands. Willing to ship within continental Europe at the buyers expense.
    3 points
  23. As a job, I've had the pleasure of most basses on the market at some point. Shuker's attention to detail is insane for the money. I've flipped a lot of basses over the years, but the Shuker's are still very much here and my go to basses. So much so, I can't wait to spec my next.
    3 points
  24. That'll be £20 then! 🙂
    3 points
  25. Aha so where you might be going wrong is that its played fingerstyle. Its all in the fingers. You cant play this with a pick. Its one of the few songs that can be played left-handed when you are right handed with the bass inverted to have the G string at the top. Does that help ? Dave
    3 points
  26. A five string Sadowsky but with a zero fret and a neck constructed with the Vigier 10-90 carbon system in the neck. The pickups will feature a single J in the neck and a humbucker in the bridge that can be coil tapped (like the Sandberg TM line). preamp will be the standard Sadowsky. Bridge will be the big hulk of metal they use in the Excess. Roger Sadowsky and Patrice Vigier can then licence Warwick to manufacture the instrument at a cost of £30,000 and then the design will be amended against my wishes to include the Just a Nut iii and be made of solid bubinga and will weigh 13lbs.
    3 points
  27. Also no. Here’s how it works for me… Everyone practises their stuff at home until they absolutely nail it. Then we get together rehearse until the band nails it. Then we gig. Does that always happen? No… but you can always hope. I joined a band just before covid and spent 18 months “nailing it”. Now the band seems to have morphed into some sort of social club.
    3 points
  28. Yeah, that's some garage... 😕🙂
    3 points
  29. Wow! Have you ever played instruments from either luthier? And, I should add, I can't imagine you have with a statement like that.
    3 points
  30. I've had both ACG and Shuker basses. My Shukers were excellent basses, but they didn't have the personality of my ACGs, they're just a much better fit for me. As much as there's a fixed menu of options with ACG, they're not really any more fixed than most luthiers, the only difference is that Alan will stick to his tried and tested designs rather than gamble on a self penned idea, or a straight up copy of something else. Alan will only use his propriety pickups, but there's a degree of customisation available as they are hand wound to spec. And, to second what @Bigwan stated above, not once have any of my ACGs come with any mistakes, or late, every time they have been early, a rarity in this game. Finally, the build quality of all of my ACGs is spectacular, and knocks the stuffing out of a lot of high end basses I've tried, absolutely incredible workmanship. I don't think you can go wrong with either, but I would certainly tip towards ACG though Cheers, Eude
    3 points
  31. voting is up Apologies to anyone hanging till to this evening , but I've just realised that I am taking Mrs Lurks away for a couple of days. This means i wont have my computer access and I cant do this on my phone.
    3 points
  32. If it's anything like NZ's it has real teeth that are easily brought to bear. You only have to mention you know your rights under sale of goods act and they will cave. They have a schedule for expected lifespan on durable goods. TV's and fridges are something like 5 years trouble free operation regardless of the 2 year warranty. 9/10 they will give you a new one to get you out of their hair.
    3 points
  33. I am selling this excellent Adamovic Jupiter 5, with the following specs: Body wood: Light weight swamp ash Top wood: Crotched olive Veneer: Wenge Shape: X-ergo back shaping Main neck wood: Maple Secondary wood: Wenge Fingerboard: Zolernia Scale length: 34" Finish: Oil Weight 3,5kg (7.7lbs) Pick-ups: Adamovic Bassbar by Heaussel Electronics: Glockenklang 3 Band Bridge: Hipshot style A-style 3-way adjustable Nut: Zolernia Jack: Barrel jack Tuners: Hipshot Ultralites Scale length: 34" I have it with an E-C configuration that really fits this instrument, but it can be strung with the more traditional B-G without any problem (it was actually the original configuration). The bass has a superficial scratch on the top, that I have tried to show in one of the pics. Other than that the bass is in great condition. It can be tested, if anyone fancies the trip, in Bilbao - Spain. Otherwise I would ship it in a Hiscox STD-EBS hardcase (159€ in Thomann), that you can also see in the pictures. The price is 2950 euro (2500 pounds, as of today) Now 2800 euro in a Sadowsky-style, foam semihard case. Best, Gorka
    2 points
  34. As new in beautiful condition comes with gig bag P{lays and balance beautifully and a lovely weight Weight: 3.9kg/8lb 10oz £1350 plus shipping or collection is fine NOW £1150 plus shipping Happy to ship outside of UK Payment via bank transfer Top: Walnut Maple, matching headstock Neck: Hard rock maple Scale length: 34.25” Fingerboard: Maple, 24 frets, Zero fret Nut width: 45mm Construction: bolt on Pickups: Delano SBC 5 HE/S with 2 mini switch (serial/single coil/parallel) Electronics: active 3-band Delano Sonar 3 - volume (push/pull active/passive), balance, bass, mid, treble/passive tone blend Finish: natural satin, body/neck matte Hardware: black, 18mm string spacing, Individual monorail bridge pieces, Y tuners incl. Padded Gigbag
    2 points
  35. We are back in on the 26th December. Drop in at some point and speak to Paul. Its a good setup and usually crowded!
    2 points
  36. A 6-string, fretted version of the Jaco Pastorius tribute Jazz Bass, still with his name on it instead of mine, just to p*ss off everyone that ever said "Jaco only needed four". Seriously though: I'd love Rob Green to build me a lefty, headless 5-string version of the classic Status Series 2000 model, with the pickups in the Chris Wolstenholme positions but with the controls simplified with the mid boost/cut pot between the bass and treble controls rather than placed by itself, and with the mid frequency knob moved to the inside of the control cavity as a set-and-forget option, with a slightly more subtle and useful filter sweep.
    2 points
  37. And maybe when you grow up to be a big boy Danny, you will!
    2 points
  38. This. Re Overwater, Chris and co are absolutely lovely, but I’m also in the “too polite” camp with the many Overwaters I’ve played. But that’s fair enough as Chris isn’t a fan of my favourite basses, so is aiming for something different than my taste. I’ve played quite a few ACGs and Shukers, and have always preferred the ACGs. The few issues I’ve typically come across with the ACGs (weight, flat board) I’m sure Alan could rectify. And Alan is an absolutely top bloke, one of the best. I’ve never spoken to John, although I do hope to go on one of his build courses at some point. It’s horses for courses really; as others have said, John will to my knowledge build pretty much anything, whereas Alan has his fixed (if flexible) range. Who I would pick out of the two would depend entirely on what I was after. There’s also Sei Bass of course, who are as good as anyone anywhere.
    2 points
  39. Yep, my old 4003s was like that too, not to mention the squiffy bridge pickup surround. QC seems low on the Ric list of priorities.
    2 points
  40. Why do they think big name professionals go into rehearsals for weeks on end before a tour? The mind boggles! They plainly want to do jam nights under the guise of being in a band. You’ve walked away, a sensible move IMO, you are not wrong in your thinking process.
    2 points
  41. Sounds like the best plan. It is a big commitment and by giving some of them a try you can find out what really works for you and what doesn't. That is very far from the truth. Although there are some amazing amater woodworkers that can do professional work (including a few on here), there is nothing amaturish about ACG instruments.
    2 points
  42. I received my custom J5 Contemporary this year. Build quality superb and certainly a firey beast in the mix but love it! Different strokes I guess 🙂
    2 points
  43. If you wax pot a CBS Fender pickup, it will become short-circuited as the wire ordered was a mistake (but cheaper, so is it really a mistake...) with a different enamel than the original thicker and heat resistant enamel used until then. When waxed, the heat will melt down the bad enamel and short-circuit the pickup. As usual with Leo Fender, who was still THE consultant and in charge of the orders, all the bad wire has been used before ordering some new one, but the waxing process was abandoned as it was an unnecessary cost... That's the reason why CBS pickups are NEVER waxed and can become (or already were) microphonic. Pickups waxing reappeared way much later during the early to mid 80's. GLWYS.
    2 points
  44. I have a Player. It's fab - super resonant, lightweight, good balance. Everything a good P should be.
    2 points
  45. At last! A post on here that makes sense. Thanks 😊
    2 points
  46. Tally Ho, here's my 3 minutes worth for this month. Hello, I'm Johnny Trash. The image brought to mind the rising sea levels and the consequences of climate change. However, I'm a glass half full kind of guy and that struck me as far too morose so instead I went with a country tinged toe-tapper about a train trip gone awry and the narrator more worried about his lack of Adam Peatyesque prowess and getting to his journey's end. Where was he hoping to get to, though? Epiphone guitar, Westfield bass, Hohner harmonica and drums programmed with Hydrogen. Vox Apogee Mic+. Recorded with Audacity and Wavepad for that wax cylinder clarity that I'm accustomed to. No auto-tuning has been harmed in the making of this ditty. Lyrics hidden below. And now to listen to all your splendid efforts, you clever Trevors.
    2 points
×
×
  • Create New...