Jump to content
Why become a member? ×

Leaderboard

Popular Content

Showing content with the highest reputation on 17/09/20 in Posts

  1. A few months ago I was in an accident and my insurance just paid out. I have "pulled the trigger" on this duo. There is no logic to these purchases WHATSOEVER beyond the fact that after 53wks solid without a week off, the whole lockdown thing and then the accident, I just thought life's too short. Hopefully it should all be with me by early next week. Two weeks ago I was frantically trying to raise money for some impending studio costs and (momentarily) I am tripping over cash. 😻
    20 points
  2. 2008 USA model just after the S-1 switch had been discontinued from the Precisions.
    6 points
  3. @agedhorse you just became my life and career coach as well as my bass guru. Can I buy any agedhorse merch??
    6 points
  4. What I enjoy most about these things is the "mistakes" - the fluffed notes, loose timing and scuzzy tone which should teach us all to never let the quest for perfection get in the way of playing with passion and personality.
    6 points
  5. My all time favourite is my Status Series 2 Classic but I've mainly been playing my Stingray Special for the last two years. It would be a difficult choice if I could only own one. I would probably keep the Status for playability and sentimental reasons, but the Stingray is great to play and sits in the mix better for what I currently do (when we are able to do gigs).
    5 points
  6. +1! There are a zillion variants on neck shapes but the chart below is a useful guide for the most common traditional shapes. Assymetrical neck shapes are also available and can look similar to your drawing.
    5 points
  7. Every email any business sends you has ‘Unsubscribe’ button. It’s one click. SBL send about 20 emails a month. Each one contains this text.
    5 points
  8. I downloaded a spreadsheet from somewhere that detailed the positions for pickups on a variety of bass guitars. For the split P it specifies 295mm from the twelfth fret. As the Yamaha neck appears to be about three quarters of an inch longer than the Encore's, I expected to run out of room to move the pickup by the same amount. This was confirmed when I got the measurement of 295mm. I could almost get there but not quite. I really wanted to get the best from the pickup placement so I decided to remove sufficient wood for clearance at the correct position. I used a Dremel to hog out the worst of the job and finished by hand with a chisel. I am very happy with the result. I can now put the pickup where it is supposed to be with the centreline at 295mm from the twelfth fret. Time for a cuppa.
    5 points
  9. Stonkin master class in rock bass !
    4 points
  10. Would your paid teacher come banging on your door 6 times a day when you didn't invite him round?
    4 points
  11. Happy new to me bass day! Due to hit the doorstep at 4pm today. (Im literally beside myself with excitement. which is a good thing because if it was just me there would be no work done. The fact ther is two of me today, is making things a little easier) Gonna be playing some sweet no latency squelchy Moog synths with this badboy by sundown! *edit* for those not in the know, this bass is capable of outputting midi data to controll actual synths. this is not audio to midi conversion but the notes are triggered by a clever system that tracks our playing through the fretts themselves.
    3 points
  12. Fender Mustang Bass MIJ reissue In excellent condition, comes with a Fender gig bag. I've recently noticed the tone pot is a little looser than the volume pot but neither affect the overall sound and neither pot is noisy. Bass was set up at McIntyre Guitars in Edinburgh last year. Currently strung with D'Addario Chrome Flats. Collection is preferred but I can potentially meet somewhere if need be, or buyer can organise courier (as I do have a box that will work). Buyer is responsible for any Paypal fees. SOLD
    3 points
  13. 3 points
  14. That's not dancing so much as trying to cope with a severe wedgie! Somebody pass her the talc.
    3 points
  15. I built one.... Genuine Flea Roadworn Body Lakland Skyline Neck Tonerider Pickups (have tried a few different pups in but these work well) Kiogon S1Loom
    3 points
  16. He's good isn't he. An asset to any forum he joins. You can buy merch. . . . . . any of the Genz Benz and Mesa Boogie Subway amps.
    3 points
  17. Excellent bass, with a great warm woody tone. Very LOW action & very light weight. I upgraded the bass with a Fender Pure Vintage Bass Bridge, which gives a better tone / sustain. Strings can be perfectly fit to the center of the poles pieces of the pickup. Bass is strung with my strings signature (45/105) in roundwound, from Skull Strings. Bass sounds great for Pick, Slap or Fingerstyle. (Also tried it with flats & it sounds great) The bass will come with a light weight GIG Bag. (Truss rod works perfectly and frets are in excellent condition) Body : Nato Neck : Maple Fingerboard : Maple with black block inlays, 9,5 inches (Radius), 20F Pickups : Fender Designed Controls : Volume, Tone Bridge : Fender Pure Vintage bass bridge Color : Black Weight : 3,5 kg I can ship anywhere BTW
    3 points
  18. for me, part of the feel is the looseness of the playing , otherwise it would be clinical and soul less
    3 points
  19. It's on it's way... I just need to print it. I'm not limiting myself to basses and I won't just be using pianos but the emphasis will be on recycled materials. Website and decal should be ready in a day or two.
    3 points
  20. You young’uns don’t know a good thing when you see it. When I started, tuition consisted of some crap books, ropey VHS videos, deciphering stuff off records/tapes and, if you were very lucky, your local teacher was half decent. It’s paid for and I don’t subscribe as I’m good as I want to be, but i would have killed for such a resource (and others online) when I was starting out.
    3 points
  21. Can't see a bass demo yet, but hopefully not long.
    2 points
  22. Withdrawn, I’ve been playing this a bit more lately & decided to keep it for now. Fender Precision 1977/78 according to the serial number. Has some playing wear but it’s a good’n. Ash body, maple neck. Guitar Info Your guitar was made at the Fullerton Plant (Fender - CBS Era), USA in 1977 - 1978 Production Number: 76111 Trades wise I might be tempted by a musicman. I’m in North Shields, Tyne & Wear. I’d prefer pickup but may meet half way or post if I really have to. I’ve sold 4 basses recently so check my feedback. I decided to get down to two precision’s so that’s why this one is up for sale.
    2 points
  23. Hi all, I'm selling my Alembic MK Signature Deluxe with Coco Bolo top, so here is little about the bass. Bass has no scratch, no belt buckle scratch, it's almost as brand new, as you can see from pics. Scale: 34" String spacing: 19 mm Fingerboard: Ebony with abalone Top: coco Bolo Back: Coco Bolo Body: Mahogany with maple and purplehearth as accent woods Neck: Maple with Purple Hearth stringers Finish: clean gloss with satin finish on the neck weight: 5.7 kg (with 5 9v batteries that goes into the bass, 4x for LED) Electronics: volume, pan, 2x filters, 2x q switches, 1x LED on/off, 1/4" mono output. LEDs are amber and red (check pictures) Bass was done in 2015, so it has 2+3 machine heads. Bass has original case, papers, everything. New one like this is 17.600 dollars, you can check here on Alembic site my bass is Sig Dlx Coco Bolo. This is I think only signature bass in EU that is available with this price. For any questions you can contact me. Here are some pic that justify the whole thing, other pics you can see on my dropbox: https://www.dropbox.com/sh/huwja8inhg3pt5e/AAAZ_-yhsAWuU_Zi-cx5C75fa?dl=0 Price says 6000 5600 pounds but it's actually 6500 6200 euros, just conversion is different every day. Also check my feedback page:
    2 points
  24. I have decided, after much thought, to finally let my Fender Flea bass go. I bought it four years ago, gigged it a lot for the next couple of years, you can see the wear from where my wrist rested on the upper bit. Also the paint is wearing through to the primer along the top edge but it's very hard to see. I have also changed one grub screw in the bottom E saddle as it had rusted up . I have the original grub screw too. There is the original gig bag and case candy Those that have these, know what a great sound comes from them. The 1964 pickups really sound ace. That jazz bass 'fizz' from the neck pickup, the honk from the bridge. It sits in my office, waiting for me to have a noodle on it at lunchtimes, it's been great to play at work. Nice and light too at 3.9kg or 8 pounds and 8 ounces, measured on my digital works scales. But in all realities I'm just not going to use it anymore unless I turn it into a Sting Jazz (which I'm not) I am just a P bass fan. I can ship (UK only) via DPD courier, you can collect , have a cuppa and a natter all things bass I work in Folkestone, Kent and live in Deal. Any questions, fire away I'm not looking for any trades, I'm just trying to thin the herd
    2 points
  25. Have decided that the bass will go down to London for sale ... so if you you are interested in getting your hands on this this fabulous bass make me an offer very soon! .2018 Fender Jazz Bass 70s Custom Shop. Light relic bass. Bass has never been gigged and only used at home. Recently bought in lockdown from a fellow Basschatter but, having small-ish hands, can't get to grips with the deeper U Shape neck. Comes with certificate, case candy and hard case. Although on the Certificate of Authenticity it is described as a 72 Jazz Bass most of the detailed specification is of a 75 Jazz. It has an Ash body, 7.25" radius neck, 1.5" nut width and nitro lacquer neck finish. I'm happy to deliver within a 30 miles radius of Cambridge or meet up half way if that suits.
    2 points
  26. Selling my 2006 Dennis Galuska Masterbuilt P-bass, based on a '68 'Telecaster' bass. I'm told that this was originally made for the bassist for Athlete, back in the day. I bought this on a bit of a whim but have realised its far, far too nice for me - I can't do it justice and feel like a bit of a fool playing on something so nice!! First thing to note is the weight - mostly due to the super premium ash, the whole bass weighs 7lbs 8oz, which is insane when you consider that it's a slab body! It strikes meevery time I pick it up; it's lovely and balanced and you can wear it for hours without getting tired (unlike most slab-bodied precisions). It's also incredibly resonant. This is the magic of Masterbuilt guitars - the base materials were hand-picked and matched by one of Fender's best and it shows. Neck is a great shape too. A very soft "V" at the lower frets, going into a "C" by 12 and onwards. It feels very natural, and has clearly been expertly hand-carved for comfort. Frets are in great condition and a very low action is achievable (although I wouldn't recommend it!). Custom "block" inlays were also specified as part of the original order, with Ron Thorn (the current head of Fender's custom shop) specifically requested to do them. The work is top-notch - no filler whatsoever and perfect in every way. Nice and subtle too - I'm not usually a fan of block inlays but these look awesome. Finish is a lovely white relic - the spec has this as "super heavy" and "extreme" and it shows on the body! Lots of checking, dings and wear - it feels and looks very played in. On the sound - it's bloody amazing. It's honestly the best sounding p-bass I've ever heard. Think of ANY recording with a full-on p-bass tone and this does it to a tee. Can go full-on snarly precsion growl, or laid-back Pino groove. And super resonance, sustain and clarity all over the neck. The tone on this has a centre detent and acts a bit like a tbx tone control giving enormous versatility. All original save for (i) the machineheads, which have been replaced with Fender-sourced new ones (the g-string head was at some point replaced with a smaller version, so there are four tiny holes under the metal); and (ii) the case, which is a replacement Fender case. All in all the best P-bass you'll ever play, hands-down. This is light-years ahead of regular Custom Shop pieces and it shows, from the feel to the sound. I need a quick sale on this because of another incoming, so I am pricing at £3200. Equivalent basses are up on Reverb etc. for £4-6k. Needs to be sold quickly, however, or I will take it down. I'm in NW London or can ship, fully insured, for £50. I will also take px if need be - just let me know what you've got!
    2 points
  27. Hi everyone, This is a pretty reluctant feeler. If someone wants to bite my hand off for it, ill let it go but otherwise ill keep it. This started life as a Fender Pawnshop Mustang Bass, with the big old mudbucker rather than a standard Mustang Pickup. I found it muddy and indistinct, so replaced the pickup and pickguard. The pickguard started life a mirrored gold pickguard from WD Music and I scuffed it up to make it less reflective. The current pickup is a Aero Mustang, but formerly it was a Nordstrand NM4 (which i still have and can include in the sale for £50), the Aero is a little smoother sounding than the Nordy, but they're similar. This feels exactly like my MIJ Mustang did, I had them both at the same time and preferred this one so sold the MIJ. Its a fantastic sounding and playing bass but two Bass VIs and a Gibson as well as a 32" Squire jag, I've got about all the short scales i need at the moment. SOLD
    2 points
  28. A Big brother for my Mb2. I've been hankering after one for some time now, but with Rob's policy now of only making what suits his business, as opposed to what customers dictate (which is fair enough if he is able to do it), and the rarity of secondhand ones available the likelihood of me getting one looked pretty slim - especially considering my very specific requirements (fretless, unlined, min 17mm string spacing). I just thought I would try my luck on the Owners' Facebook page, and lo and behold I got lucky, a great guy in Italy responded, we did a deal and I am now the proud owner of a Deep 5 to go with my Mb2 4 string. I must admit I was slightly twitchy about sending a not insignificant sum of money to a complete stranger in a foreign country, but I trusted my luck to PayPal's compensation policy and bit the bullet. Antonio turned out to be a really great guy and the bass was in my hot little (actually big) hands within a few days and I couldn't be more pleased. Initially the action was too low for me - lots of lovely Mwah but not much attack and rather inclined to buzz on the low B, but a half turn on the truss rod did the trick and all is now great. This now means there will be no real point in having any other 5 string basses, so I'll be selling a couple of very nice ones soon in the form of a Shuker Artist 5 and Rick Turner Renaissance 5. Probably when things have normalised a bit more and hopefully the Bass community will be more comfortable spending money on bass guitars.
    2 points
  29. I own exactly the same amp, my guilty little pleasure! I used to have pictures of these on my bedroom wall when I was a dorky teenager. These days my wife forbids such filth - Prude.
    2 points
  30. Well... I watched a live Police set on Saturday night on the t00bz and was sufficiently motivated by it to start learning some of the back catalogue. Just got Message In A Bottle nailed. Probably have a go at So Lonely tomorrow.
    2 points
  31. Was in Merchant City Music earlier and tried out a few Reverends (They are all fantastic btw). The Sentinel is a great wee bass, the blade pickup is HOT and bright, but the 3 way switch, not 100% what the settings are but got a great variety of tones. If you're looking at Mustangs at around £800 and want something a bit different I would definitely recommend looking at the Sentinel as an option!
    2 points
  32. "spoiler box in your signature file" - I have no idea what that actually means! I'll remedy the situation if you can explain.😕
    2 points
  33. The video is ok, but it needed more screen time for the bassist 😉 😎
    2 points
  34. I got really excited for a minute! Then realised it's a souped up OC3/POG hybrid. I'm assuming it's digital? I'm still waiting on a Wazacraft Analog OC2 reissue,and watch them fly off the shelves.
    2 points
  35. No OC2 Waza but now there's an OC5 then. The OC2 full wet sounded close to me. Definitely has that hollowed out sine wave thing going on.
    2 points
  36. I also have all the Queen isolated tracks, and I thought that can't possibly be John Deacon playing the bass because it sounded harsh and quite messy, but when I put all the tracks together in my DAW, it sounded perfect in the mix, and I thought the same about John Entwistle's isolated tracks. I have to say that hearing these isolated tracks helped my confidence because I had always doubted my tones and playing ability until recently when I started doing some recording at home, and I was pleasantly surprised at how well my bass sits in the mix, and my playing was more than acceptable for someone who plays mainly for fun. 😉
    2 points
  37. When I was doing my University project back around '97 I asked my dad if he could find an old Betamax machine and tapes as he was (and still is) an absolute car boot sale addict. Even then it was hard to get them but he came good, and there were a good number of tapes for me to experiment with. I plugged up the machine, tried the tapes, and realised he had purchased someone's entire pornography collection.... (When I say experiment, I meant I wiped the tapes as quick as I could......honest guv......)
    2 points
  38. Some years I got multitracks to a number of Queen songs and I am delighted to say the DI bass tracks are refreshingly as bad as if I'd played them. Add in the mic'd 4x12 and the 1x18 and it all sounds wonderful.
    2 points
  39. Just seen this bad boy on a thread over on TalkBass: I don’t play 6 string or fretless but good lord!
    2 points
  40. Mine is easily and predictably my old Jazz bass. Nothing has ever come remotely close to it for playability and sound. Every time I record and sneakily try to use another bass, I always get told to just go get the fender 😂. It’s not perfect, and yes, some bits are a bit ‘wonky’,(it always looks WAY wonkier in pictures!?!) But in well over 200 basses owned, this one is the most special by a long long long way! It’s a 1990 MiJ 60s reissue, the ‘mojo’ to the finish is real not fake, earned from thousands of gigs since I bought it around 1993. It’s all completely original...apart from the neck, pickups, electronics, all the hardware, scratchplate and stripes. And one of the tuning heads. 😂
    2 points
  41. Actually, the bigger problem is the end users who think they understand what the data sheets mean without actually understanding the technical data behind the numbers and WHY they might be used in describing specific specs. When an experienced designer learns all of the ins and outs behind the performance of the module and what is actually happening between the lines, it becomes apparent that there are additional performance gains present to those who understand how to exploit them. As a specific example, when I was designing around an earlier IcePower module, we used to get "armchair techies" who would insist that the module wasn't capable of driving 4 ohms BTL and that it was was only capable of 250 watts into 4 ohms therefore we were not being truthful. In fact, the amp could easily deliver 900+ watts RMS into 4 ohms BTL, and that the 250 watt single ended specification didn't even apply. This was such a valuable off sheet applications (that required specialized cooling and over-modulation management) that we received a patent for the techniques that we employed. It's very similar to what's happened in the automotive industry over the years. Power output per cubic inch (or litre) of displacement has increased greatly through the introduction of fuel injection, variable valve timing, variable ignition timing, stoichiometric fuel management through combustion products feedback, advanced combustion chamber design, tighter tolerances, lighter reciprocating mass, etc. The same applies to many of the successful applications in all industries. The more you know, the easier it is to be successful and deliver successful, reliable products.
    2 points
  42. I can't not dance while playing. It's part performance but it's also an integral part of making music. Of course I use the word dance in its loosest possible interpretation.
    2 points
×
×
  • Create New...