Leaderboard

To my certain recollection the term vocalist has been around for years. It may now perhaps be gaining in popularity but I prefer the term: 'the annoying bastard at the front with his idiotic music stand and his crap jokes; who arrives last, leaves first and seldom buys a round; the man whose wife is in a permanent state of (i) illness (ii) vexation (iii) pregnancy; he who never scores a gig except free gigs; and his stupid hat.'

*whispers* Do it.. kill rock and roll, kill it.. go on.. kill it

I've been known to press the 'Post EQ' button after he's plugged it into my amp

I interviewed Frank some years ago along with David Ellefson and I have to say that they are both super nice guys. Really down to earth and chatty. You'd be forgiven for thinking you were just hanging out with a fellow BassChatter. Frank even got me a beer.

Not that it's my choice to make but I agree that the plain tops complement the burl top best. Do you have a position marker on them? (Thanks for the change of background) Andy, I'd go for a W shaped F hole and patent it PDQ. It looks like Norris is a little sensitive about his norrisole. Norris, I've now got a design for a hole shaped like a Cumberland sausage but I've got nowhere left to put the chuffing bridge! I hope you're happy with yourself.

Oh, they are compulsory to try As is the vanderkley cab and EICH 1000w head... Heheh...

Luckily I have a two-gig weekend that's going to keep me occupied. Otherwise, like a poorly-trained spaniel, I'd be chewing up the furniture. Seriously though, when I asked Andy to make me the bass the idea was always 'when it's done, it's done'. No time constraints.

The end is in sight? Neil will be struggling with "Is it done yet?" for the next few days....

Well - I'm out of excuses now...tomorrow is final sanding day and finishing starts at the weekend. The last job was to set the bridge at its final height, and that allows me to see how much leeway I have for the final curve of the top. It's not critical, but I would like the bridge plate to be at least partially sunken into the top and, ideally, flush. It makes no difference to the functionality, but I want to avoid the look of some bridges where they appear to be a bit of an afterthought. I used a Dremel precision router for the flatness and finished the edges with chisels. Like the pickup routs, I did the curved front corners with a 5mm drill, drilled to final depth, before routing the bulk out : That gives me a nice close fit and looks like it is supposed to be there: This done, it lets me pencil the 'flush level'... ...so I can see how deep to sand. The aim will be flush at the leading edge and curving down a touch to expose the bridge plate progressively towards the tailstock. I'm hoping that the weather stays dry tomorrow as it is a lot easier to do the final sand outside - especially when looking for sanding marks, glue overspill and unwanted dints. The Osmo has arrived so, all being well, I should be able to apply the first couple of sealing coats as well before the start of the weekend

Thanks Geoff,your lessons and videos were a big help when I got my EUB and now I'm reviewing some of them as I work on proper techniques for the DB...and having lots of fun too!

Despite being one of the bands I have seen the most times I still have to remind myself that David J of Bauhaus played fretless. One of the pleasures of old age this not remembering lark...

That`s why I always connect the DI cable to my Sansamp - a straight bass sound would decimate the sound of our band, much the same way as getting the guitarist to play his Les Paul with no gain.

That is the difference between musicians that have to work for their living and pampered over produced pop stars who think the sun shines out of their behinds because someone else wrote a hit song for them... .bit like footballers vs rugby players.

Bluejay, that is exactly the first thing that came to my mind! Reyalpssabginkcufecin! (one for the Anthrax fans there)

Compared to the hollowbody beauty above, my short scale is somewhat simple, yet a nice piece of candy... Fender Pawn Shop Bass VI, I got it in a trade two days ago. Nice piece! Makes a fine contrastb to my other "real" basses...

It's part of the lyrics for the song Angel Delight. Played by Dave Pegg, as with virtually every Fairport recording, on his trusty Fender Precision. The Ibanez is a recent acquisition.

This reminds me of my first bass from 1993 or so! Unfortunately, it was a dog - heavier than a Trace Elliot amp, with what appeared to be a ply-like neck! It was a 1969 Kay. Terrible. Yours looks great though! I’m getting all sentimental now - might go looking for a looky likey...

No..!

Now you tell me!!!!! 😮

Here are the plain knobs - they will lighten a touch when the oil has dried. @SpondonBassed - please note that I SOMETIMES take notice of what you say ref the background The comparison is here: Personally, I prefer the plainer ones on the actual bass - my eye is drawn to the top and not the knobs - but, whatever, Neil will be given both sets

Well it has taken a while, but I've finally had time to give my Burns Barracuda Bass a proper work out including a rehearsal with the band. First the obligatory photos: While it shares a lot in common with the Squier being a Bass VI, in many ways it is a very different instrument, especially when it comes to the pickups and electrics. The wider neck is much more comfortable for me than the narrow Squier. However it is not as wide as the specifications would lead you to believe. Nut width is 45mm, but the actual string spacing between the two E strings is only 38mm, a mere 3mm more than the Squier, and the strings are very obviously set in from the fingerboard edges. The difference is enough to make the neck feel more comfortable overall, but if the string spacing made full use of the available nut width, it would be even more useful to me. The fingerboard is bound in fake MoP which looks great, but doesn't make the dots particularly easy to see in subdued lighting conditions - as I discovered the first time I took this bass into the rehearsal room. At the other end things are less good. The overall string spacing at the bridge is only 52mm compared with 55mm on the Squier, so while it is easier to form chord shapes on the neck without inadvertently muting strings with my fingers, picking the correct string cleanly is a lot harder. For the first week I was constantly missing strings or playing the wrong one. This is one of the problems when the hardware for a Bass VI has been appropriated from a guitar design. The Squier Bass VI might look like it's been cobbled together from bits left over from the Fender Jaguar, but all the important parts have been suitably altered to suit the nature of the instrument. The bridge on the Barracuda appears to be exactly the same as that on the Marvin Guitar and consequently the spacing here is really a bit too narrow for a Bass VI. The relatively narrow bridge also means that the outer string get further way from the edge of the fingerboard as you move up the neck. On the other hand the vibrato mechanism is a lot more useful than the one on the Squier. It's smoother feeling has a noticeable effect on all the strings and has less of a tendency to put the instrument out of tune. Overall the Barracuda is (for me) easier to play than the Squier, but it really needs to have a correspondingly wider string spacing at the bridge to match that of the nut for optimum comfort. The other interesting thing is that despite looking bigger and chunkier than the Squier Bass VI, both basses weigh the same (4.3kg on my scales) the Barracuda feels lighter on the strap and is definitely more comfortable to wear for a 2-3 hour rehearsal. When it come to the pickups and electronics there's a lot more variation between the Barracuda and the Squier Bass VI. The Barracuda has a standard Strat-type pickup selector with the conventional 5 options. However pulling up the tone control nearest the jack socket automatically activates the neck pick up irrespective of the position of the 5-way switch. I was a bit worried that the "in-between" pickup positions might sound a bit weedy, put while there is some thinning of tone, it's all very usable and all the positions work well in a band mix. At the moment I'm favouring either the bridge or middle pickup solo'd or the bridge and neck pickups together depending on the band mix. What is much better than the Squier is that the instrument has a lot of clarity without it being at the expense of the bottom end. To that end if you want to be playing surf-style bass this could well be the bass for you. There's plenty of twang and oomph available, and at the same time should it be required. As you can probably tell, while the Burns Barracuda still isn't ideal for me it's a lot more suitable than the Squier Bass VI. It is usable straight out of the case (it comes with a rather nice Burns branded hard case) without needing to shim the neck or replace the strings, and the bridge/vibrato unit while not being as wide as would be ideal is overall a lot more suitable for a bass instrument than the Squier. I think this bass will be fine for me at the moment, until I can afford to have something mode more specifically for my needs.

I’ve got the remastered (most recent remaster - there’s been a couple) of LED Zeppelin II and IV on vinyl and they sound awesome; much better than the originals in terms of mix clarity and dynamics. I think if they’re done well then it’s a ‘no harm, no foul’ situation.

Even with the import duty & electrical problem, that's a bargain. Lovely example of vintage MIJ class, that's a Fujigen Gakki build, like Ibanez of the same era & MIJ Fenders & Squiers. Since this is turning into a MIJ P copy love-in, here are my two: Daion Performer, from around 1980-ish, made by Yamaki Gakki: Ibanez 2366B, Fujigen Gakki, from 1972-73 as far as I can work out: Both lovely basses - but I don't really play Precisions so I certainly don't need two! Anyone want a very old, very, very rare Ibanez?

Wow. No biggie, I recognise your tone from some of the "sales assistants" in multiple shops that ultimately went bust due to lack of customer loyalty as a result of awful customer service😁

Yes, that is the attitude that a lot of music shops had when I was young many years ago, and why no-one was that worried when a lot of them closed down.

I've been on a bit of a P bass kick lately, and wanted to pick something up that would give me that classic sound, but without breaking the bank. I'm a sucker for older basses too, so when this 1976 Greco P bass copy came up for sale in Japan, I snatched it for the princely sum of £113. Had to pay almost the same again to get it over here and through customs, but today I picked it up. Currently not getting any output, but the wiring is shot and I think it's more of a pots issue than a pickup issue. A spray of contact cleaner made no difference. Needs a good stripping down and cleaning, but should do me nicely! Nice and light not sure on the body wood, but looks fantastic. Everything's nicely aged too. No idea what's going on with the 2 additional switches - once I've taken it apart I'll try and work it out. Kill switch maybe? They're obviously not original, but it would be cool to keep them and use them for something- open to suggestions! I'll probably take my time getting this one back to working order, but that's all part of the fun. Cheers all, here's some pics....

Maybe they don't spend enough time worrying and debating these important terminological distinctions , typical vocalist attitude , singers would care 😁

I call our singer Stéphane. Now there, you have a point. Your 'singing' is, indeed, something else. My eyes moisten at the mere thought.

When I worked cruise ships, there were musical acts on there of all ages. Young and old in the house show band(s), jazz trios and musical duos with folk in their 50s-60s and one fella in one group celebrated his 70th on the ship. You need to be fit to an extent you can launch a life boat or raft (for your own sanity) and you just need to be free of everyday life demands. If you can pick up and go for 3-6 months with no repercussions, then why not. There are worse jobs ;).

That would be an ecumenical matter.

Without looking at the schematics, it could be the bias trim control for the flux capacitor.

Just beacause a band has gigs booked it doesn't mean it going anywhere. I got involved in a 10 piece soul band that has gigs booked and had been gigging before a few members had left. First rehearsal, two out of the three horn players and the keys player didn't arrive. The main singer was good but the two female backing singers were beyond terrible. I decide to give it one more rehearsal. Next rehearsal, the guitarist has now left the band and arranged a dep(wtf) who also never turned up. Trombone guy arrives saying Sax and Trumpet have decided to jump ship. I've checked the bands website and they are still listing some gigs in August, but they're still putting ads on JMB for members and describing themselves as a "gigging band". My point is there are so many delusional people out there who like the idea of being in a band but have no idea how to actally put one together.

It's also the best shredder album, the only one that still is audible nowadays. That said, Devin Townsend never appeared on Passion & Warfare, but on the next one, Sex & Religion, which is real deep sh*t, especially the awful singing of Devin Townsend and I'm not speaking of his solo work which is even worse : circus metal as I called it at the time.

For me it's Mick Karn. I was fortunate to see Japan several times before they really broke big and he was phenomenal, but let's not forget all of Japan were great players. The first two albums are five star for me to this day, Quiet Life less so. It was very much a case of diminishing returns as the band evolved and they fired Rob Dean. To echo an earlier point, the solo albums were a tad lacklustre IMO; he needed to be part of a band for the real magic to surface. I'd suggest sourcing copies of the JBK albums or the Polytown CD (with David Torn and Terry Bozzio).

Yes you did!

I remember thinking in 2004 “what’s wrong with the microphone, sounds like the ends of her words are being cut off - can’t understand a word she’s saying” sounded like a normal singer who’s mouth was opening and closing at the wrong time with a broken jaw...

Hi all, Just to let you know I have a new post - this time I take a look at 'Reflections' by Diana Ross and The Supremes. Full transcription and video on the Jamerson Analysed site! - http://www.jamersonanalysed.co.uk/2018/07/reflections-diana-ross-and-supremes-1968.html Cheers, Chris.

Let's face it Dad, you are never going to like anything I post. All the things that you dislike about the Scissor Sisters are exactly the reasons why I prefer their version over the original. And it has the advantage of having stripped out all the po-faced pretentious muso twaddle of that Pink Floyd infuse into all their songs.

I used to work for a company that did vinyl signage. They used to spray with a very weak solution of detergent i.e. washing up liquid, then squeegee it once in place. A soft cloth would do the same. Start from one side, holding the vinyl up slightly as you apply it. If there are any bubbles you can prick it with a pin then use a cloth to smooth it down

We played Scarisbrick Marina Festival, just outside Southport, Saturday and Sunday afternoons. Saturday clashed with the footy and predictably there were only a handful of people there, it felt a bit too quiet, and we drifted toward the end. Better on Sunday - we had a drummer this time, a dep who did pretty well, still only about 30 people but they were bouncing around in their seats and clapping to the faster songs, better atmosphere and we played better. Afterwards an elderly lady came up to me with the sweetest smile, put her hand on my arm and said "Thank you - the bass drives the band, you know." Made my day 🙂

Fast and nasty snap taken just before tonight’s gig

And another from Donald Sam and Dave - I thank you | Bass Transcription | Donald "Duck" Dunn

First pics of mine on the operating table. Incomming Feb 2018.