Leaderboard

Yes, should have posted them here first, but got caught up in trying to post PDF versions on Facebook (very complicated), so I put images instead on my Neil Murray bass guitarist FB page and got on with other things. I will rectify later, and I hope to add more transcriptions in coming weeks.

Ah I see... pick player. Answers alot of questions. **runs for cover**

I'm on to the tax man, have no fear!! They have been alerted to his business/band names, home address etc. Being ex HMRC, I know how these things work. He's been very silly indeed. 🙂

I do 3D printing, and I have Hofners, so I might be able to come up with something. Give me a couple of days to see what kind of 3D file I can come up with... [Terminator] 'I'll be back' [/Terminator]

First a big box arrived after a long wait. I ordered it in October from a Swedish shop. I could have got it faster overseas, but I really wanted the 5 year warranty from the Swedish shop. I know Mesa had some issues previous with their gear... Under some supervision - kind of - from the Very Hairy King of the Basement I unpacked the amp... Then stacked upon the Genzler BA12-3 cabs for a test... /2krE48y]2021-01-12 - MESA 1[/url] by Roger Hedin, on Flickr Well, it sounded as I could expect. Not at all like my Spartan or Genzler amp, but more like a tube amp. It takes some tweaking to get things right, not just set and forget. I like it.

@Dad3353 is that bloke...shifty looking and somewhat unnerving until you get to know him...

Two Brooks sisters, side by side Grabbird and Thundervee

Would something along these lines be of help, or a head-start..?

I dunno about the tonnes of fish but I reckon the bass solo threat will have him folding in seconds.

A bit more progress. I've made the scratchplate and headstock plate. The scratchplate still needs pickup openings and screw holes drilling, I'm just about the tidy up the neck pocket part of the plate so I can then fit the neck and put an E and G string on to then mark where the pickups will go. Then cut the openings in the plate, then finally drill the fixing holes. The holes in the the plate that came on it aren't as the original so I'll drill them in the right place as per the pictures posted earlier in the thread. I also made the plate fit the curves of the lower bout better as the one I had wasn't great. The headstock plate is certainly different. I honestly don't know if they all, or indeed any, had this. In some close up pictures it definitely looks like a separate plate covering the headstock. I've made one from the scratchplate material to see what it looks like and I really like it. Why don't more basses have this quirky little feature, kind of like a matching colour headstock but it matches the scratchplate. I've made it so it sits in a few mil from the edge so that you can still see the cream paint. The paint was applied a mil over the edge of the headstock to help with this. I don't even think I need to put any fixings in it as the tuner ferrules and string tree will hold it. I might put two screws in if needed, or maybe just a bit of double sided tape to hold it. I'll decide when the time comes. The pictures are a bit yellow looking, indoor lighting and phone camera. In the flesh it's not quite as gold, more of a brownish tinge. The next thing I need, which looks virtually impossible to find is a headstock badge. I could put a sticker on but it's just not the same. Does anyone know about 3D printing and what would be involved in getting one done? This is the badge, and you can also see the headstock plate.

The only break he'll get is the tax break for him and his paymasters. Oooh yes.... what a cracker of a deal he got! *facepalm*

I'm in the club! Just had UPS deliver this

Filter board, I turned all the lights on

Not sure how there is any legal threat around the thread but that is not my question. It seems to me it is important to keep this individual above the radar. With the specific thread locked, this drops down and eventually out. How can we make sure that our community is aware (and on the look-out) for him and his activities?

Can anyone print me an Irish passport? 😉😉

Ok, so hands up who rushed straight in, plunking away and never bothered to read the manual...✋ I had no idea there even was a sub-harmonics function on this amp... 🙈 Instruction manuals are an eye opener...😂😂

This forum is brilliant! It reminds me of the goods old days when whatever you wanted there was a bloke down the pub that could get it. 😆

I doubt he cares to be honest, but he's terrified that Priti will shout at him if anything is done to allow freer movement.

Short sighted comment. Tours etc are often organised at least 9-12 months in advance. There might be no tours in the next 9 months but that doesn't mean people aren't working towards things in 2022 and later....

Hi all I've spent the best part of 3 hours thinning this topic out to what could be considered relevant and uncontroversial comments. To keep this topic readable, please can we just: Keep to reported facts and updates about case progression Don't feel that you have to comment on everyone else's post Cut out the banter - yes it's funny but it just bloats out the topic to make it harder to read and harder to find relevant information Thanks

Some VERY good news at last - live music back by Spring 2023? - Suggestion for new thread title .................. 😎

I have a 5 string SUB arriving tomorrow. It has a Seymour Duncan Alnico pickup and Nordstrand Pre installed and is already strung with D'Addario Chrome flats. I just fancied trying one. If I like it I will likely strip the paint off (all black) and go natural with a tort plate or get all blingy and go metal flake blue with a white plate like this https://www.talkbass.com/threads/mm-bongo-hh-5-marty-bell-refinish-gorgeous.1369256/

you’ve got to allow time for the government covid test register to monitor who is going to be allowed in pubs first... of course, it will be world class and so accurate that nobody will be allowed in...

What an utter load of management speak b####cks. I mean, yeah, great news. But whoever puts out press releases like this should be shot. It reminds me of every up their own derrière middle manager I've ever met. Cringe worthy!

I am posting this PDF here for anyone's reference/entertainment, my entire Messenger conversation with Mr Mason regarding Sans-gate. A few things to note: When I mentioned that he had reposted the ad is where I began to get suspicious. Some of you will note the same tracking proof screenshot that you may have received and the same obvious lies and excuses. Some of you may also think I was too polite. When, I began to be suspicious of his intentions and discovered this thread through the FB conversation; I opted for a polite, ignorant, persistent and non-confrontational approach. I hoped this would make it more likely to get my money back. Seems to have worked eventually. You may also notice I called him Mike twice, and Mark at another point. Maybe that's why he kept my money 🤣 You may also enjoy the moment when he agrees it is "unacceptable". Finally you surely will enjoy my genuinely accidental and ironic typo at the end of my penultimate message. ENJOY Mick Mason Chat.pdf

Strangely right now the link to the Fender website page is down, but Andertons sent an email out with the "New for 2021" models that had a boxer bass tucked in the corner. Clicking through to the Anderton's website and yes, lots of nice new Fenders, but again, no Jazz Bass Special! Online, it looks like the basses will be FSR, thus being made in Japan, like the original 80's models. Only one colour at the moment, but boy there's no doubt these will be nice - hopefully as good as the originals (of which I have two of the 80's active versions). Here's the only outlet I can find with decent images: https://www.themusiczoo.com/products/fender-mij-boxer-series-precision-bass-limited-edition-sherwood-green-metallic

Ladies, Gentlemen and everyone in between: I proudly present the Brooks Thundervee. A hybrid between a Thunderbird and a Flying V. - Neck through with Korina body wings - Nine ply Korina/mahogany neck - Ebony faceplate on headstock - Red Mahogany stain. Gloss transparent acrylic finish - Rosewood fretboard - 23 Jumbo frets - 34" scale - Handcut Buffalo horn nut - Three ply black-white-black pickguard - Wide travel Thunderbird bridge - String through body ferrules - Hipshot ultralite nickel plated tuners - Spokewheel double action trussrod - 2 x Sixties repro Thunderbird pickups nickel. 9.2 K Ohm - Di Marzio EP111 toggle switch 4PDT for serial mode - 2 x Volume pot Bourns 500 kOhms logarithmic - 1 x Tone pot Bourns 500 kOhms logarithmic - Kemet capacitor 47 nF paper insulation - DR FatBeams 45-105 Electronics circuit by BQ Music Pics of the build process can be found here This is what she sounds like:

“Step into my office/portacabin, sir...”

I will look into it tomorrow and post the response. You will get the VAT back but I will check the mechanism.

That is a really good question! Calling @Steve Browning

This is what the back looks like @Maude You can clearly see the four coils. The switching isn't overly rocket science other than getting the magnet orientation and phasing correct to get the 3 way switch to get those combinations. However, there is a touch of great cleverness in the shape of some tiny resistors on the switch PCB because the one thing these pickups do that most split-coil arrangements (much more common on guitars than basses) can't do, is achieve pretty much equal volume between the 4-coil humbucking option and the 'single coil' (actually two coils) options. In a guitar you generally get a major volume drop when you switch to single coil on a single pickup. These don't - you can play on one pickup and switch between the three options and the volumes are unaffected. Very clever - and exceptionally useful in a live setting. There's discussion on, and a demo of, that at the back end of the Bassbash video on P1 of this thread.

Like a glove.

Just going to throw it in there... you know that the touring companies that were UK based and hauling gear across the EU for a living are now going to be sat at home whilst an EU company takes over because it's easier for them to cross boundaries... right? It's not just the people on the stage that are impacted...

Please see my post above re. the economic point: any country that shuts down touring musicians whether it's the UK or the EU are simply shooting themselves in the foot. Saving lives is quite rightly the focus and priority for everyone, but I have every expectation that sense will prevail on this issue (as it already seems to be doing here from Lardy's comment).

Did they really have to play, 'In League With Satan', from 'Welcome To Hell' backwards to discover it might contain "messages" about The Devil. 😂😂

I suspect the fat controller is loathe to do anything that allows people from other countries to have freer access to the U.K. Which is what would happen if he implemented what was previously proposed.

Lol! Give the poor guy a break. Didn't all the naysayers say a trade deal with the EU was impossible in 12 months as the EU took 7 years to agree one with Canada? Well he's got one. That's a pretty decent bit of negotiating in my books. And tbf he may have a couple of other things in his in-tray higher up on his to do list than sorting out visas for currently non-existent tours...

Suprise visit from UPS this morning delivering my Ibanez.

Obviously I reserve the right to do absolutely nothing with it in the same way as all my other incredible GAS ideas wither and die.

There are no businesses. His real job is in a warehouse

@stewblack I second using the Functional Ear Trainer app, it’s brilliant. You might also be interested in this free masterclass on ear training that is happening this Friday. It’s hosted by a friend of mine and his stuff is always great. It’s free but you need to register for it: https://bit.ly/3ozK9sb

I'm about 40 minutes from there. And I've got a slightly battered (by me, over the last 30odd years!) Custom - if you're in the area you can have a go! And just to make you really sick I bought it from Allbang and Strummit (RIP!) in Covent Garden for £500 in about 1989...

I like how he's even cropped his own face off, first time I've ever seen that on a band's promo site, almost as if he's usually up to monkey business.

That could be the understatement of the thread…! This was never going to stop established ‘bigger’ bands from touring. For bands selling out theatre level venues, it is just another touring expense. Of course, they need to keep this additional expense down, so they are much more likely to use EU based crews rather than British guys. There are already UK based production companies who will only employ British techs if they have dual passports. The real problem is for musos who rely on smaller scale live work in the EU to make a living; be it on cruise ships, sessions, holiday seasons, a band tour or promo work, or often freelancers playing multiple tours / odd dates with a number of acts throughout the year. Multiple work permits, carnets, different visa requirements, VAT issues for merch, etc all add cost to make it almost impossible for to work in the EU.

Newest build for recording some stuff with a few new DIY additions - Brief notes for the DIY ones - 1 - Schalltechnik pumpernickel - Compressor 2 - EQD Arpanoid clone - Arrpegiator 3 - EQD Life clone - Tweaked Rat with octave and boost 4 - Modded blueberry clone 5 - Moosapotamous Dirty Bird - Mad squelchy fuzz - like a prunes and custard but angrier and less useful 6 - VFE Triumvate - 3-band distortion 7 - Catalinbread SFT clone with mods - Cranked SVT sound 8 - SUNN Model T preamp clone 9 - DBA Space Ring clone with mods - Very angry ring modulator 10 - Frostwave funk-a-duck clone - Completely mad envelope filter 11 - mid-fi pitch pirate clone - Modded to switch between internal LFO and extermal CV 12 - Sequencer - Puts out sequenced CV for the pitch pirate and phaser 13 - Lovetone Doppelganger clone 14 - EQD Rainbow Machine clone 15 - DBA Echo Dream clone - Modded heavily so it actually works... 16 - Madbean Dreamtime - Unique multi-mode digital delay 17 - Reverb - Belton brick based very spacey reverb

Nice idea but not true. 90 days in 180 is the rule for the whole Schengen area. If you tried to do that you would be deported. The only places you could try that are by going from a non-Schengen EU country to a Schengen one; Ireland, Romania, Bulgaria, Croatia and Cyprus may allow entry even if you have just spent 90 days in the Schengen area. Apparently this loophole may not last long as these countries are looking to join the Schengen area. People in the UK (not singling you out - and certainly not looking to criticise as it's not surprising - British passports have generally given lots of visa free options) generally don't have much of an idea of visas, work permits and residency. I think for a lot of people the idea of getting a visa is as easy as turning up in Turkey or Thailand and getting your visa on the spot. Lots of people also think the 90 day visa run - popping over the border then popping back, as you sort of suggested above, is an option. It's generally always been illegal, but a lot of poorer countries would turn a blind eye as they liked the idea of westerners bringing hard currency into the country. Believe me, it will not work in a lot of places any more, and to try to actually get residency in countries such as the USA, Canada, Australia, and now the EU, is a complex, drawn out, expensive process with no guarantee of success at the end.