Leaderboard
Popular Content
Showing content with the highest reputation on 12/02/26 in Posts
-
Okay everhone. Update time. There is a complete, 100% fix that sorts the issue completely that I've found. If I tune the bass down a half step to Bb the issue goes away. It's not a solution for me as I'd go raving mad trying to work out what I'm doing, but it's good to know it's an option. This is what Ryan at Dingwall had to say: Thanks for reaching out. In my experience dead spots can be minimized but not necessarily eliminated without, in my opinion, unacceptable compromise. To remove them completely the resonant frequency of the neck needs to be octaves above that of the speaking range of the instrument. Full carbon fibre necks work great for this but the tone for some people can be a deal breaker. We also had great luck using a clamp at the headstock. The added mass from the clamp helped a bit for sure. The major difference came from the off-centredness of the clamp, this all but eliminated the dead spots by controlling the torsional vibrations in the neck. I've heard some people have had success over the years with the Fatfinger, but if adding mass to the headstock is the goal the first thing I would try is a heavier set of tuners. I hope this helps, please let me know if you have any more questions. I asked what tuners he'd say worked and he told me "Gotoh's are a drop in, the index screws are located in the same place. Look at the standard keys, not the reso-lites." However... on recommendation from someone else I had a go at adjusting the truss rod. I'd done it as soon as I noticed the dead spot but only gave it a quarter turn so this morning I tried giving it another quarter turn which is about as much as I want for the action I like (there is still a bit of relief in the neck) and while it's not totally elimiated the dead spot, now if you didn't know where it was and I handed it to you I'd challenge anyone other than a luthier to spot it. So, that's it. It'll do me and I'm not doing anything else for the time being. I'll see how it goes when I change the strings next or if the neck needs adjustment as the seasons change or whatnot. Thanks to everyone for your input - I really appreciate your advice and support.8 points
-
Hi all, just thought I’d post an updated amp/bass combo for my practicing at home. squier affinity pbass with QP pick ups, gotoh bridge, Schaller tuning heads, Rotosound swing 66 strings. ampeg stack micro amp6 points
-
Aye... sorry, everyone. Being in an Eagles tribute band will do that to you. I need that bridge pickup for some of the tunes. That's a 2017 American Standard, and it's blummin' lovely! OK - that's four days of rehearsals over... I'm knackered, but so far, so good. It's a great batch of songs, but inevitably the trickiest tune of the lot has had a late-in-the-day key change. As a non-reader, it keeps things spicy. We're in to the Arena tomorrow night to check lines & monitors, and have a couple of run-throughs before a day of full production rehearsals on Saturday. There's 13 in the band: Drummer (founder member of Lindisfarne), Keys (Ex-Dire Straits, Bob Dylan, Eric Clapton), Keys / Violin / MD (Ex-Sting), Guitar #1 (Ex-Tygers of Pan Tang), Guitar #2 (Ex Arctic Monkeys / Last Shadow Puppets), 4x Brass (Including The 1975's sax player), 3x BVs (including the lady who sang 'I'll Do Anything for Love' with Meat Loaf) ...and little 'ol me. I'm on double-duty - I'm also responsible for the content on the video screens, which is nice as I get to make sure the visuals closely match the music. I'm looking forward to it all coming together. There was a segment about the show on the One Show on the BBC this evening if anyone's interested. Here's some more pics!6 points
-
Sorry to report I have had a terrible accident. I accidentally drove to Camden tonight and bought a new gig bag. The old one was very tatty. Unfortunately the bass I had ordered to just try out, also accidentally left the shop in the bag after I accidentally paid for both of said items. A terrible state of affairs. I now have 4 basses! I am practically a hoarder now.5 points
-
Ah – entirely fair. You are, of course, correct. A picture is worth a thousand words. And words, however dutiful, can only gesture toward polymer and plush. So here they are in their natural habitat: mid-migration, flanked by their more extroverted cousins, maintaining their usual rectangular composure while the rest of life rearranges itself around them. Observe the setting: cardboard parapets, straps in mild disarray, the faint atmosphere of transition. And there they stand. Unperturbed. Rectangular. Matte. Emotionally stable. They are not staged beneath flattering studio lights. No velvet backdrops. No strategic houseplants. No attempts at seduction through lens flare. Documentary realism, bass-case vérité. You will notice something immediately: they do not compete for attention. They are above leaning theatrically, or mimic rock-and-roll excess. They simply exist with a certain utilitarian dignity. Their surfaces are clean. Their edges remain honest. The latches, though unphotographed in close-up here, retain the satisfying, almost municipal authority of well-made hardware. And yes, they are pictured among other cases. They have lived in the company of instruments. They have known wood and wire, and they discriminate against neither fellow ABS items nor wood and tweed. The attached images, however, should be understood as archival material. They date from their most recent documented journey (a house move of moderate logistical complexity) and captures them in situ, among fellow cases, cables, and cardboard ephemera. The reason they are archival is simple and humbling: they currently reside at the top of a closet, elevated beyond casual reach, in that high domestic stratum reserved for objects that are both useful and not immediately required. Retrieving them would involve a ladder, minor planning, and a level of initiative which, this morning, has not prevailed. But I hasten to add that bring their current altitude to your attention, as it means that they have are not strewn across floor or languishing in a damp basement. This reminds me that, many years ago, I purchased a bass that arrived encased not merely in plywood and plush, but in what can only be described as a self-governing biome. At first glance, the case appeared ordinary: tidy exterior, reasonably well-kept corners, the satisfaction of a bargain. Upon opening it – gently, with anticipation – there emerged not just the scent of nitro, but a humid declaration of sovereignty. The interior lining had developed a clear topography. There were pale constellations along the seams. A soft, speculative fuzz tracing the contours of the padding. In one corner, an ambitious colony had established what I can only assume was a capital city. The plush had taken on a faintly maritime fragrance – not, mind you, the romantic salt-spray of coastal air, but the resigned dampness of a forgotten cellar in late November. There was, unmistakably, life. Microscopic, industrious, collaborative life. I closed it. I reopened it, hoping the ecosystem might have reconsidered its tenancy. It had not. What followed was a period of quarantine, ventilation, and existential reflection. The bass survived. The case did not. Ever since, I have been vigilant. These two Thomann cases have known no such colonisation. Their interiors remain plush rather than tundra. No spores. No mycelial diplomacy. No soft, creeping frontier along the hinge line. If a prospective buyer requires contemporary verification, I can, with sufficient notice and encouragment, attempt to summit the wardrobe. I will then gather fresh close-ups of latches and plush. Until then, please accept this archival evidence, if not as a faithful representation of their condition, at least as a character reference.5 points
-
I am selling two lightly used Thomann E-Bass Case ABS hard cases. They are not brand new, but they are well kept and, if anything, gently seasoned by travel. They look like this: https://www.thomann.co.uk/thomann_ebasscase.htm They are objects of a certain quiet seriousness: rectangular, black, unpretentious, built not to impress but to endure. They have travelled London to Dublin, Dublin to Liverpool, back again, and eventually home to London – companions to the small upheavals of rented flats and changing postcodes. They have waited in hallways while keys were located, leaned against unfamiliar walls, and rested in the polite half-light of rehearsal rooms. They have crossed thresholds more often than stages, and have done so without complaint. What they have not known is neglect. No airline conveyor belts, no rain-lashed festival fields, no catastrophic encounters with gravity. They have been carried, not thrown. They have been closed with intention, never slammed. They have performed the humble but essential task of containment. Cosmetically, they are in very good condition. I cannot see any scratches on the shells. Along the seam – where the two halves meet – I may have placed a strip of paper tape as a precaution, simply to avoid cosmetic rubbing over time. It was a preventative gesture rather than a response to damage, and it has done its quiet job. Underneath, all is as it should be. Inside, the plush black lining is soft and reassuring, the padded neck support steady, the internal compartment ready for cables, tuners, and the small debris of musical life. They fit most standard electric bass shapes (and then some) comfortably and offer that rare and civilised sensation of closure – the knowledge that something fragile has been properly enclosed, making their bearer slightly less anxious about gravity and door frames Retail is around £69 each; I am asking £80 (somewhat negotiable) for the pair, which strikes me as fair. I now possess all the cases I require – indeed, according to my partner, I have surpassed that threshold and entered surplus. These two stand in the corner like retired sentinels: still capable, faintly dignified, waiting for reassignment. There is something almost unjust in their idleness. Tools such as these are meant to move, to accompany, to guard. They deserve another instrument to protect, another set of hands to lift them, another series of staircases and train platforms to traverse. They deserve to close once more around wood and wire and quiet intention. Ideally, they will be spared the frequency of house moves that marked their first chapter, though they have proven themselves equal to the task. If your bass is currently entrusted to a soft gig bag and optimism, this is your moment to upgrade its existential security.4 points
-
Colour going on this one… This is the paulownia build for a BC member and it’s now officially very, very red. Dakota Red in nitro and it’s absolutely popping under the lights. Paulownia is always an interesting one. Lovely and light, but it does like to remind you it’s basically made of compressed air and optimism. This body had the full routine — shellac, primer, grain attention, more primer, careful flattening — the whole “no, you are not sinking back on me again” conversation. Happy to say it’s behaved. Edges are nice and soft, belly carve is flowing well, and the horns have kept their shape without going blobby under colour. Always a relief. Still a few coats and plenty of cure time before flatting and polishing, but it’s at that exciting stage where it actually looks like a bass rather than a woodworking experiment. Going to look great once the hardware’s on and it’s all glassed up in clear. More soon once it’s had time to harden off and I start the levelling dance. Made to play. Built to last. 🔴4 points
-
More progress on this one… Blank is fully cut and shaped now. Horns are flowing nicely and I’ve softened the edges without turning it into a bar of soap. Always that “measure twice, sand forever” moment, but we’re still in one-piece territory. Belly cut is carved and blended. Went for comfort over bravado – this one will sit properly against a ribcage rather than just looking good in photos. First coat of Liberon is on the ziricote and… wow. The grain has absolutely come alive. The dark lines have gone deep and dramatic and the lighter figuring is glowing. It’s one of those woods that looks fairly reserved dry, then turns full cinematic once oil hits it. Before anyone asks – this isn’t staying oil finished. The oil is just to pop the grain and show me what we’re working with. It’ll be sealed and finished in nitro clear. I want that depth and chatoyance under a proper gloss coat. A few tiny natural pin knots showing through – staying. This is wood, not laminate flooring. Letting it cure now before the next stage. So far… I’m very happy. Made to play. Built to last.4 points
-
3 points
-
3 points
-
I don't know why you would use 15" tops with 18" subs really if you are buying these new. You'll be crossing over well above the frequency where 15s give any potential advantage over 12's. I have a Passat estate I can take 15" tops plus two 15" subs, 10" monitors, my bass gear with leads, stands and several lights with careful packing but it is tight and it would be far quicker to pack into something a bit bigger. You can't see out of the back either. I rarely use the subs as there is not much the 15's can't do on their own but starting again with 12's might be better.3 points
-
Nice to see shortscale Stingrays becoming available again in Europe but hell - not cheap at £2800. Not sure if these are special editions as they are active unlike other shorties. Whatever the case it doesn’t look like I’ll be getting a stablemate for my Starry Night passive version. https://www.google.com/aclk?sa=L&ai=DChsSEwjVsoOphtSSAxUImVAGHVbDCdYYACICCAEQMxoCZGc&co=1&gclid=EAIaIQobChMI1bKDqYbUkgMVCJlQBh1WwwnWEAQYGiABEgLGGfD_BwE&sig=AOD64_38pwaJ7xkdS4I4ymfMLkT_zbJJ9g&ctype=5&q=&ved=2ahUKEwigrP-ohtSSAxU8W0EAHe9zCTgQwg8oAHoFCA0QtwE&adurl=3 points
-
3 points
-
Still figuring out my own sound.. 16+> okko>sanamp>voodoo>beast>octabvre>poor man bc1 Now it's limited by the dc7 ....3 points
-
Originals rehearsal tonight. One new song refined considerably, with some nice dynamics including an Iron Maiden style gallop. We worked out some neat stops too. Also tidied up our re-interpretation of a song from the original album. Didn't originally have bass but came up with a 'classically inspired' bassline to bring along that's a sort of counterpoint melody. Very chuffed with myself. Plus added a little bass trill in the chorus that made the lead guitarist and drummer smile.3 points
-
Maybe I'll make a new post for this, but I thought I'd share the first pictures of my build!3 points
-
3 points
-
Pretty much mint condition bar a couple of tiny marks on headstock which I've tried to show in the photos. Very little use, taken in trade but I'm just not using it (got 'trumped' by another bass!). Comes with a slightly battered Sandberg gig bag, good for storage/protection but with a broken zip on the main front pocket. Collection only, Bristol2 points
-
That's terrible! I hope you recover quickly. Lots of playing loud bass should help a bit.2 points
-
Here's a picture of the official tool No, I never had one, I fashioned something out of part of a binder clip, as explained in this TB thread: https://www.talkbass.com/threads/yamaha-bb-series-tuner-adjustment-tool-i-just-made-one-that-works.1440391/2 points
-
2 points
-
Here's a couple more photos. The inlay is based on a tattoo I have (maybe cheesy, but I think it came out very well) of the crow, (hometown symbol) with the GD bolt. Definitely inspired by that look, as well as the cocobolo Alembic stuff. I love the neck-through aesthetic, so I wanted to sort of emulate that with the sapwood(?) of the cocobolo.2 points
-
2 points
-
I saw this on Instagram and gave it a rating of "quite nice" Very 80s Ibanez Musician if you get my drift.2 points
-
Email this morning (he’s been on hols) my cab should be ready to collect in the next week - so when I’m back from my hols 😁2 points
-
This is so true. My fave P weighs in at 6.8 lbs plays & sounds Fab, so I thought I would obtain a back up ‘just in case’ - Exactly the same model, same year, loom, pickups, strings - even the colour & yep you’ve guessed correctly - It was a lot heavier + played & sounded nothing like the other one🙈🙈!!2 points
-
I've done it myself a few times but recently I've done it 3 times through https://www.bassjapandirect.com/index.html Danny Stewart is the chap. He charges a small fee for his export services however this is the only route I'll use these days. He has a Bass Finder service but if you know what you want and where it is he reduces that to just his admin fee.2 points
-
The safety regulatory statement for power consumption is required by the standards (UL/cUL/IEC 60065 or 62368) to be stated at a minimum of 1/8-rated "RMS" power at the lowest rated load, which corresponds to a duty cycle of 12.5% (but the manufacturer may at their option use a higher number). This number originated from the hi-fi world where this was considered the approximate duty cycle of an unclipped full range signal (which IMO is unrealistic for bass guitar). If the normal operation of the amp is intended to be compressed, overdriven or distorted, the stated duty cycle may be increased to reflect the additional power consumed under these conditions at the manufacturer's option. Most test labs will test to verify that the amp can sustain the increased duty cycle without failure or presenting a safety/fire hazard under a test sequence called "abnormal conditions" testing, but not always (depending on the lab and the test routine because other abnormal conditions testing elements may suffice).2 points
-
Pleased to report my last two rehearsals were at very civilised levels. No ear protection needed. Inuse Alpines for gigs, waiting for my ACS moulds to arrive... quite excited!2 points
-
Looks like i'll be joining a Blues rock band from Edinburgh area. The BL has already seen the Glam band i'm in and says he's happy if i'm up for it. They're happy to work around the Glam band gigs too so that's a bonus. I've to let them know tomorrow once i've had a think about it but i'm quite keen on the idea. Dave2 points
-
Thanks for this, much appreciated. I’ve ordered new pots and will have a play at the weekend! Will update some more photos and update! 🤞2 points
-
Beautiful Alusonic Django 4 Deluxe Carbon custom shop. 2023 model in excellent condition, lightly gigged a handful of times and only for sale as I have been using short scale basses exclusively for a while now and it's a shame for this amazing and versatile bass not to be used. Specs below, everything is the highest quality. It also has a hipshot drop tuner fitted, I will also include the original tuner. The strings are Dean Markley nickel rounds. Plenty of online videos of these basses showing the sounds available, the 5 way pickup selection switch and active eq give a huge varity of tones all of which are usable. There is a active/passive push pull on the volume knob. Weight is 3.6kg and the balance is perfect on the strap, strap locks fitted which I will include. I'm not keen on posting this bass but if you have a courier you trust I will make sure the bass is well packed, it comes with it's original hardcase. also happy to drive for a halfway meet up, possibly Bristol or Yeovil, Dorchester area. Possible trade for a Fender JMJ mustang or any other interesting short or medium scale bass, depending on value I have a few more 34" scale basses I will be selling soon, Yamaha BB1500A, Yamaha BEX4, a roadworn Japanese Fender e series PJ-455 C o n s t r u c t i o n : Bolt – on Body: Chambered Selected Swamp Ash Body Body Finish: Open Pore Matte Black Acrylic Top: Carbon Fiber Top Finish: Clear Matte Acrylic Neck: Hard Maple with Graphite Reinforcing Rods Neck Thickness: 20mm at 1st fret, 23mm at 12th fret Neck Shape: Custom “C/V” Neck Finish: Epoxy Matte Black F r e t b o a r d : Graphitex F r e t b o a r d Finish: Natural Scale Length: 34″ (864mm) Radius: 12″ N u m b e r o f F r e t s : 24 F r e t s Size: Medium Jumbo String Nut: PPS “Tedur” N u t Wi d t h : 40 mm P o s i t i o n Marks: White Side Dots Truss Rod: 2-way Set in Normal Position Neck P l a t e : 5-Bolt Bridge: Alusonic Aluminium Quick Release Matte Black S t r i n g S p a c i n g : 20 mm Tu n e r s : Hipshot Ultralites Black Pickups: Alusonic Hybrid Alnico5/Neodymium Hum+Split Coil PBass Controls: Volume (push-pull Active/Passive), Treble (passive tone), Bass, 5-way Selector S w i t c h H a r d w a r e : Aluminium Matte Black P i c k g u a r d : Aluminium Matte Black Knobs: Aluminium Black String: Alusonic Steel 45/105 Wesso 3es: ABS Hardcase2 points
-
Same thing rebranded. Reform are just Snickers to the tory Marathon. Either way, they need a warning to say they contain nuts.2 points
-
2 points
-
2 points
-
Aah man, lost both my mam and dad in the last 2 years. They were always huge fans of the show and went a few times, including to the last one. Memoriiieeesss! Hope it all goes well WoT!2 points
-
It’d definitely be difficult to place an order without knowing what you were going to get1 point
-
Dire Straits, Dire Straits. Sultans became such a classic I think it possibly overshadowed how great this album is.1 point
-
1 point
-
Love Sheryl Crow. In the 90's I stopped playing and for the most part listening to music. I only bought half a dozen CD's. Sheryl Crow and Oasis. Check her out on Tiny Desk.1 point
-
1 point
-
Hey short scalers ! (Especially those who play Ibanez EHB1000S) I share a post i've made in my NBD EHB1000S topic (to not repeat it here) cause i've had an idea about neck edge inlay that could help those ones who have taken the adhesive dots road to replace the non-working-kind-of-luminlays https://www.basschat.co.uk/topic/522029-nbd-ibanez-ehb-1000s/#findComment-5621679 Enjoy !1 point
-
1 point
-
1 point
-
1 point
-
Here we go then , after an outright winner was declared for January, @upside downer was over the moon with having the honour of choosing our theme this month. Its not BS to say I chuckled somewhat when I opened the message By way of an introduction upside downer mooooses... "A farmer paints stripes on her cow to increase its visibility at night and prevent car accidents if it wanders onto the road during blackouts in World War II. I wonder if Lee Marvin ever starred in a film called 'Paint Your Cow'? " RULES ... ✅ Entries must be <5 minutes and recorded between now and the deadline. ❌ No illegal samples, copyright infringements or other snide goings-on ❌ Bagpipes, well its not a belted Galloway up there , so be careful. ❌ No voting for your own entry. We'll know. And we'll shame you.. Deadline-wise, we will close the entries at midnight on the 22nd Feb , which in effect, will stretch to teatime on the 23rd, but don't milk it A line or two of blurb as usual for the vote thread will be grand. enjoy.1 point
-
It was a pretty great gig lastnight on the ska scene, first outing for the Sandberg VM SL - interestingly, I ended up playing it passively with a Sadowsky Pre and Tonerider Duke installed. The bass was light, but by god those Dr Martins were heavy!1 point
-
Nice bass, but I could do without the bland pot. My playing is boring enough as it is! I've had a few Silver Series Stratocasters in the past and there's something about them that has been better than any more recent Squier I've tried. These were made in the early 90s in the last few years of Japanese production. Some nice modifications on this one too. Good luck with the sale.1 point
