Jump to content

dodgnofski

Members
  • Content Count

    876
  • Joined

  • Last visited

Total Watts

61 Excellent

1 Follower

About dodgnofski

  • Rank
    Dodgnofski
  • Birthday 09/07/1953

Personal Information

  • Location
    North Staffordshire

Recent Profile Visitors

4,014 profile views
  1. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  2. Pete very kindly agreed to sell me his Elfin Bass and he was an absolute pleasure to deal with from start to finish with second to none communication. The Bass arrived within 24 hours and was extremely well packaged. Pete is a great Guy and needless to say, but I will - I would heartily recommend him to all on here👍👍 Thanks again Pete and all the best, Tim
  3. MarkBass LM ll 500w RMS Bass Guitar Amplifier complete with a Generic Gigbag and Mains Lead. This is one of the original Made In Italy examples, prior to them moving production to the Far East, it is in exceptional condition with hardly any signs of wear and is fully operational. I would rate this as being 9/10 condition wise, having only being kept as a back up plus home use albeit with my old eyes. Having owned or played umpteen MarkBass amps over the years, in my humble opinion I much prefer the warmth and depth provided by the Mark ll over the more recent Mark lll. I have been told that this is due to the analog pre - amp (which may be responsible for the ‘thicker’ sound) - as opposed to a digital pre amp on later models? - but I’m no expert. The Fan on this is very quiet, unlike some of MarkBass amps where I have found the fan can be a tad noisy. The array of tones available from the extensive EQ section are second to none and there is more than enough volume for any Gig unless you were playing exceptionally large venues, where PA support from the D.I. would then obviously be available. The VPF control is very similar to a Contour, or Taste filter featured on many amps these days and is great asset to achieving the type of sound you require, with the turn of a single knob. 500 watts RMS at 4 ohms, or 300 watts RMS at 8 ohms, so plenty of volume wether using one 8 ohms Speaker, or two. It will also give the full 500w into a single 4 ohm Cab. Here are those wonderful Specs we all love : - INPUT impedance 500 Kohm, max. voltage 15 Vpp BALANCED INPUT (XLR) impedance 22 Khom, max. voltage 25 Vpp EFFECT RETURN impedance 22 Kohm, max. voltage 25 Vpp CONTROLS GAIN -80 dB to +23 dB range MASTER VOLUME GROUND LIFT switch on rear panel EQUALIZATION LOW center frequency: 40 Hz; level: ±16 dB LOW MID center frequency: 360 Hz, level: ±16 dB HIGH MID centre frequency: 800 Hz, level: ±16 dB HIGH center frequency: 10 kHz, level: ±16 dB VPF (Variable Pre-shape Filter) center frequency 380 Hz (cut) VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz (cut) OUTPUT LINE OUT balanced XLR, max. voltage 10 Vpp EFFECT SEND unbalanced, max. voltage 20 Vpp (pre-EQ) TUNER OUT unbalanced, max. voltage 25 Vpp SPEAKER OUT speakon, 1/4" OTHER WEIGHT 6.39 lbs / 2.9 kg DEPTH 10.1 in. / 25.6 cm WIDTH 10.87 in. / 27.6 cm HEIGHT 2.8 in. / 7.1 cm OUTPUT POWER 300W RMS @ 8 ohm, 500W RMS @ 4 ohm POWER REQUIREMENT 100/120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale) Previously voted “Best Bass Head" and "All-Around Best New Product" by the readers of Bass Player, our top-selling amp has made history with its stunning combination of great sound, compact size and light weight (6.4 lbs). Identical to the head included in all our CMD and mini CMD combos, this unit is truly the flagship amp for the Markbass sound. Its small size allows for easy transportation, but its sound is nothing short of professional. Also offers a bonus XLR balanced input for double bass pickups. Trades - wise, I may be interested in a Mark Bass 602 or 802 Combo - preferably an Italian Jobbie if possible, or maybe an Eden WTX. Postage would be via Parcelforce, fully insured & hopefully delivered within 24 hours, COVID permiting to the UK Mainland only - sorry.
  4. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  5. Lovely Bass❤️❤️ - great seller 👍👍..
  6. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  7. Anyone ever seen the serial number at the bottom of the neck plate 😳😳?
  8. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  9. The neck from my 1999? P - Special with Truss Rod issues, which I'm told can be rectified by someone who knows what they are doing? - so that won't be me then. This is from the Standard Series - not the Affinity Range Nice Maple neck with some flaming and lovely grained Rosewood fingerboard with minor cracking before the first fret, which I am informed can be repaired quite easily? Lightweight at just 750 gms, so no neck dive 👍 Would make a nice Winter project. Has more of a Jazz profile and nut width, than Precision - 38mm according to my old eyes. Widest point at the butt end looks like 63mm. I can post to the UK Mainland for £9.95 - Parcelforce 48 Any questions, please give me a shout 👍
  10. The Body from my Squier P - Special Standard Series PJ Pickups. Nice and light, with very good tonal range. There are a few dings and marks, but is generally in good condition. The previous owner fitted a none original pick guard which is not fitted too well around the neck pocket. Selling separately from the neck, as I am unsure of the stability of the Truss Rod after fitting new strings - The truss rod screws in and out, but doesn’t seem to make a great deal of difference to the relief? So I’m listing it separately in case someone wants it who knows what they are doing. Neck pocket at the widest point looks like 64mm - to my old eyes. Any questions, please fire away.
  11. Withdrawn - Sorry Guys, its playing so well - I can't let it go 👍 Fender Squier P - Bass Special PJ Bass Guitar from 1999 with Gig Bag in good used condition with several marks and blemishes. This is from the Standard Series, not the Affinity range. This P Bass - Special answers the age old question of wether to purchase a Precision Bass, or a Jazz Bass having both P & J pickups. This pickup configuration provides a wide range of tonal options and sounds superb as the P pickup offers the Classic Precision ‘thump’ and the Jazz pickup adds clarity, definition and ‘growl’ when required to cut through the mix. The Bass has been nicely set up with a low action, a new set of light gauge strings have just been fitted & comes complete with a lightweight Gig Bag. The three controls are P pickup volume, J pickup volume and a Master tone control, which goes from an old school sound through to a more modern Hi - Fi tone. Another great advantage to the ‘PJ’ configuration is that although the body is a Classic Precision shape, the neck is based on the slimmer, more manageable Jazz Bass width neck, to give improved playability. Can post to the UK Mainland for £24.95
  12. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  13. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  14. Fender American Vintage ‘62 Re Issue (AVRI) Precision Bass built in the USA in 2003, all original & in excellent lightly used condition with just a few marks consistent with normal use, the ‘worst’ one I can find albeit with my old eyes is a small 4mm impact mark near the bridge (please see photograph) which is very shallow & can't be seen 'off stage' plus a tiny mark on the end of the headstock and so overall I would grade this as 9/10 in my humble opinion of course - especially for a Nitro finished 17 year old instrument. Weight is a tad over 8.5 lbs according to my digital scales. Nails the James Jamerson thing. The Bass is set up with a nice low action and so plays really well, with a lovely true Precison Bass sound and excellent tonal variation. Comes complete with the Original Hard Shell Case also built in the USA complete with all the Case Candy including the original Pickup and Bridge covers, which have never been fitted - so no holes in the body either side of the bridge - in fact, they are still sealed in the original bag from new. The case does have a few scuffs to the corners, but nothing major and comes complete with the two original keys - also still in a sealed bag. Here is some info off T'interweb This model has been discontinued. Today we are featuring a Fender American Vintage ’62 Precision Bass in a beautiful three tone sunburst. This reissue instrument pays homage to a ground breaking year for the Fender Precision Bass. All of the classic details are present including the rosewood fretboard, tortoise shell pickguard, nitrocellulose lacquer finish and chrome bridge and pickup covers. The covers are shipped unmounted but are included in the accessory kit. The “C” shape neck is super smooth to play and the classic single split-coil pickup provides that warm, full and fat tone that you have heard on so many of your favourite records!! Specifications: Alder body Tortoise pickguard Maple neck Rosewood fretboard 1.75″ nut width 34″ scale length “C” shape neck profile 20 vintage style frets Single Split-Coil pickup Master Volume, Master Tone controls Nickel and Chrome hardware American Vintage 4 Saddle bridge Vintage Style Reverse Tuning Machines Deluxe Light Brown hardshell case with strap, cable and bridge and pickup cover in the accessory kit. i would prefer payment via Bank Transfer prior to collection - if someone has a reliable Courier they trust to send for it at their risk and cost. I have a box and the case is built like a brick outhouse which would be well bubble wrapped also - UK Mailnland only - sorry☹️🙈🙈. Any questions, please give me a shout 👍👍....
×
×
  • Create New...