Jump to content
Why become a member? ×

Fitting a right hand ledge or holder to a pickguard?


TJ1
 Share

Recommended Posts

I know most bass players like to rest the palm of their plucking hand on the pickup or the E string, but to me it feels a bit awkward and obstructive.

Has anyone installed a special ledge above the strings that their lower palm could rest comfortably on, whilst their fingers hovered over the strings?

But sometimes I tend to think if it hasn't been maybe there's a reason..

Link to comment
Share on other sites

I’ve never got on with a thumb rest, my 62RI came with the thumb rest fitted below the strings as a tug bar which I took off, but it’s personal preference , you could try fitting it with some double sided tape first to see if you like it TJ, rather than drill holes straight away 🙂

Link to comment
Share on other sites

I've recently had to learn "The Floating Thumb Technique" after moving from 4 to 5 string. TBH I should have leant to play this before changing to 5ers - long term I would expect fewer issues with hand/ tendon injuries.

I'd suggest learning this rather than putting screw holes in your gear. @TJ1 If you choose to go down the thumb rest route let me know. I have one I took off another bass.

Edited by TheGreek
  • Like 1
  • Thanks 1
Link to comment
Share on other sites

I have the zero mod one on my Rickenbacker. I don't recall it being so expensive but I would have thought it would solve the problem of not wanting to drill holes. Also if you don't get on with it, I would imagine it would keep most of the resale value if you need to sell it on. If it is going to solve a problem with a bass you like $40 doesn't sound like a huge amount in the grander scheme of things.

zero.jpg.f9f9293a1cf9c0d196abf1d7004fd149.jpg

Link to comment
Share on other sites

Yeah, explore options where you're not screwing new holes into the wood. As someone who is prone to compulsive bass purchases (not as bad as others, but still prone 😁), additional thumb rests or gaping random holes for thumb rest screws are an absolute deal-breaker. If you think you might ever sell this instrument on, find a non-permanent way to do it.

  • Like 1
Link to comment
Share on other sites

I made this up a few months ago to fit my standard P.  No mods required, it simply attaches to existing scratchplate screws. The base plate is thin metal with a small block of UPVC plastic glued on top to try and mimic the same feel as your thumb resting on the side of the P pup as far as possible, and it works pretty well.

I tried it as an experiment to get a slightly more bridge pup sound from a P,  and it really does this.

My son is a design engineer and I asked him if it could be 3D printed, but he thought that the base plate would still have to be metal to get the structural rigidity required. So I'm not planning on going into production quite yet.   However, it only took me about 30 mins to make !  🙂

 

Precision thumb rest Sept 20.JPG

  • Like 1
Link to comment
Share on other sites

I'm either thumb on the pickup or full floating hand if I'm going up and down strings a lot and want the extra muting from my right hand thumb.

I looked at the thumb rests but I like the clean look of my basses and adding some chunk of wood or plastic would annoy me more than it'd add to play-ability right now.

Link to comment
Share on other sites

On two of my basses, I’ve taken a piece of dowel, split it down the middle, shaped it and attached it to the p/g with double sided tape. Once I was happy with the size, shape and position, I removed it, finished it with a couple of coats of black nail polish and fixed it on with two small spots of super glue (to facilitate easy removal, if required). I would post photos, but they’re away in storage, 500 miles from my current location 😢. If I find an old photo, I’ll post it.

  • Like 1
Link to comment
Share on other sites

On 11/02/2021 at 09:50, ezbass said:

On two of my basses, I’ve taken a piece of dowel, split it down the middle, shaped it and attached it to the p/g with double sided tape. Once I was happy with the size, shape and position, I removed it, finished it with a couple of coats of black nail polish and fixed it on with two small spots of super glue (to facilitate easy removal, if required). I would post photos, but they’re away in storage, 500 miles from my current location 😢. If I find an old photo, I’ll post it.

I have done something similar on my p-bass, i used a section of a wooden clothes hanger as it was already nicely profiled, my P-bass is an old 77 that has been modded many times so already had the 2 holes for the thumb rest, and there are some random extra holes so i just ran between a couple of those, i'll try and get a photo later. i think that using a couple of the scratchplate holes might work if you wanted a long thumbrest.

 

Matt

  • Like 1
Link to comment
Share on other sites

On 07/02/2021 at 17:32, TheGreek said:

I've recently had to learn "The Floating Thumb Technique" after moving from 4 to 5 string. TBH I should have leant to play this before changing to 5ers - long term I would expect fewer issues with hand/ tendon injuries.

I'd suggest learning this rather than putting screw holes in your gear. @TJ1 If you choose to go down the thumb rest route let me know. I have one I took off another bass.

Floating thumb is definitely worth trying if you have muting issues or pains in your plucking hand/wrist (or want to prevent them!). Or you just want another fun technique as a feather in your cap! 

check out:

from about the 8 minute to 9 minute marks - he shows three complementary plucking hand muting options including floating thumb, all seem more ergonomic than a fixed anchor point.

Link to comment
Share on other sites

1 hour ago, Matt P said:

I have done something similar on my p-bass, i used a section of a wooden clothes hanger as it was already nicely profiled, my P-bass is an old 77 that has been modded many times so already had the 2 holes for the thumb rest, and there are some random extra holes so i just ran between a couple of those, i'll try and get a photo later. i think that using a couple of the scratchplate holes might work if you wanted a long thumbrest.

 

Matt

Now that’s genius. There are so many different sections on a flat wooden coat hanger with a trouser bar, that you’re bound to find a part that works for you and they can be really long too. I bow to your inventiveness!

Link to comment
Share on other sites

20 minutes ago, ezbass said:

Now that’s genius. There are so many different sections on a flat wooden coat hanger with a trouser bar, that you’re bound to find a part that works for you and they can be really long too. I bow to your inventiveness!

Thanks, I've actually cut up a couple of the cheap ikea hangers to use the timber for projects, the nicer hangers are hardwood as well. 

 

This is my p-bass, I really should make a neater one and get some better screws, these were just old ones from my parts stash. 

Matt

DSC_0127.JPG

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...