gsgbass Posted May 17, 2011 Share Posted May 17, 2011 (edited) There's a thread for bass settings, how about tell us, or show us a pic of your amp settings. I'm only showing the Classic settings on my Marshall MB4410 Combo. I kinda' prefer the Classic sound over the Modern sound. Edited May 21, 2011 by famstd Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted May 17, 2011 Share Posted May 17, 2011 When I had the MB amps as above, my settings were everything at 12 noon. Thinking about it, my settings on all my amps are usually about that, maybe cut slightly on the mids, but that`s about it. Quote Link to comment Share on other sites More sharing options...
JTUK Posted May 17, 2011 Share Posted May 17, 2011 All my settings are centred apart for the enhancer. If the room is challenging, then I might boost the para higher mids to suit and my taste. Never touch the bass control Quote Link to comment Share on other sites More sharing options...
Dave Vader Posted May 17, 2011 Share Posted May 17, 2011 Frowny face, those are my settings. Quote Link to comment Share on other sites More sharing options...
Truckstop Posted May 17, 2011 Share Posted May 17, 2011 Completely flat. Sometimes if I'm doing chord exercises I boost the middle and treble a touch. Truckstop Quote Link to comment Share on other sites More sharing options...
Low End Bee Posted May 17, 2011 Share Posted May 17, 2011 Out of 10 Bass 5, Mid 2, Treble 6 As I use an Orange Terror Bass this isn't all that much different from leaving them flat. Gain is the most useful knob. 4 for the Retrovibe 6 for the Precision. I don't like the mid thing. Glad I play in a trio. Quote Link to comment Share on other sites More sharing options...
Merton Posted May 17, 2011 Share Posted May 17, 2011 Eden WT550: Flat with slight tweaks for the room. A tiny smidge of the "Enhance" control, but not much. Lots of volume Quote Link to comment Share on other sites More sharing options...
chris_b Posted May 17, 2011 Share Posted May 17, 2011 If an amp needs me to use the eq then it doesn't stay long. I only do flat with maybe a slight, occasional adjustment on the instrument. Quote Link to comment Share on other sites More sharing options...
xgsjx Posted May 17, 2011 Share Posted May 17, 2011 Flat here with a little VPF & a little more VLE. I may do slight adjustments to suit venues if needed. Quote Link to comment Share on other sites More sharing options...
Mog Posted May 17, 2011 Share Posted May 17, 2011 Fairly scooped. On the Trace it was Preshape 1, low and high mids boosted, graphic level and balance at about 3-4 o'clock. I'm using the LH500 mostly now and it 8-6-7 on the eq with the brite switch and limiter engaged. Quote Link to comment Share on other sites More sharing options...
TomTFS Posted May 17, 2011 Share Posted May 17, 2011 Pull out some 100-150Hz, add a small amount of enhance. Done. On an Eden Metro. I think that could just be the cab though as it's an old Ashdown MAG one I haven't bothered to upgrade yet. Quote Link to comment Share on other sites More sharing options...
EssentialTension Posted May 17, 2011 Share Posted May 17, 2011 Flat - then adjust for the room I'm in if necessary. If an amp doesn't sound good flat then I wouldn't want it. Quote Link to comment Share on other sites More sharing options...
alexclaber Posted May 17, 2011 Share Posted May 17, 2011 [quote name='EssentialTension' post='1234637' date='May 17 2011, 05:54 PM']If an amp doesn't sound good flat then I wouldn't want it.[/quote] But what is flat? Quote Link to comment Share on other sites More sharing options...
EssentialTension Posted May 17, 2011 Share Posted May 17, 2011 (edited) [quote name='alexclaber' post='1234647' date='May 17 2011, 06:03 PM']But what is flat?[/quote] Without having to spend time messing with it, with the knobs in the middle position. (I know that's not the physics answer but it's what I meant, and what I do) Edited May 17, 2011 by EssentialTension Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted May 17, 2011 Share Posted May 17, 2011 Mine are whatever sounds best in the room I'm in. Since every room is different acoustically my settings are different in every room . Quote Link to comment Share on other sites More sharing options...
thodrik Posted May 17, 2011 Share Posted May 17, 2011 It depends on the amp, the bass, the room I'm in, the cab I am using, the state of my strings, effects pedals I am using and the type of music I am playing. On each of my amps the 'flat' settings produce entirely different sounds, so the whole thing turns into a 'how long is a piece of string?' debate. Sometimes you can get great sounds of amps that sound terrible (to me anyway) with everything in the twelve o'clock position or without any pre-shapes or eq settings (Ashdown/Trace Elliot). I think that the trick is spending time with the amp so you can work out what works and does not work for you. It is not a sin to alter the amp eq to get a sound you like, in fact that is what the knobs and sliders are generally there for. One of my amps sounds great with minimal eq boosts and without any pre-shapes, whereas the other requires some button pressing. I frankly don't care either way as they are totally different amps with different characteristics. Quote Link to comment Share on other sites More sharing options...
alexclaber Posted May 17, 2011 Share Posted May 17, 2011 [quote name='EssentialTension' post='1234652' date='May 17 2011, 06:07 PM']Without having to spend time messing with it, with the knobs in the middle position. (I know that's not the physics answer but it's what I meant, and what I do)[/quote] Fair enough! I hate messing with amps, hence my main rig has essentially no EQ and just a volume knob. And it's totally clean however you set that. But with a 2 or 3 band EQ, how hard is it to turn the bass knob up if it sounds thin, down if it sounds boomy, turn the treble knob up if it sounds dull, down if it sounds too bright, and turn the mids up if it sounds too mellow, down if it sounds too aggressive? It isn't exactly rocket science and could mean there are a lot more amps to choose from, not just the few whose default curve happens to suit you, your bass and your cab. Quote Link to comment Share on other sites More sharing options...
LiamPodmore Posted May 17, 2011 Share Posted May 17, 2011 Everything flat with the Bright switch engaged, and on my bass' pre its also flat, sometimes a mid boost. Liam Quote Link to comment Share on other sites More sharing options...
Marvin Posted May 17, 2011 Share Posted May 17, 2011 [quote name='Bill Fitzmaurice' post='1234716' date='May 17 2011, 06:53 PM']Mine are whatever sounds best in the room I'm in. Since every room is different acoustically my settings are different in every room .[/quote] [quote name='thodrik' post='1234831' date='May 17 2011, 08:22 PM']It depends on the amp, the bass, the room I'm in, the cab I am using, the state of my strings, effects pedals I am using and the type of music I am playing. On each of my amps the 'flat' settings produce entirely different sounds, so the whole thing turns into a 'how long is a piece of string?' debate. Sometimes you can get great sounds of amps that sound terrible (to me anyway) with everything in the twelve o'clock position or without any pre-shapes or eq settings (Ashdown/Trace Elliot). I think that the trick is spending time with the amp so you can work out what works and does not work for you. It is not a sin to alter the amp eq to get a sound you like, in fact that is what the knobs and sliders are generally there for. One of my amps sounds great with minimal eq boosts and without any pre-shapes, whereas the other requires some button pressing. I frankly don't care either way as they are totally different amps with different characteristics.[/quote] Both of these. Yes. Quote Link to comment Share on other sites More sharing options...
skychaserhigh Posted May 17, 2011 Share Posted May 17, 2011 I turn the knobs until it sounds good. Can be different each time depending on the venue and stage. I don't buy into the keeping the eq flat at all. Using amps this way usually produces a sound that i don't like so i adjust settings until i get a sound i can work with. When i had a LM3 i tried it flat with the filters off and it sounded pretty crap , much better using the eq or a VT pedal ! Don't be afraid to turn some knobs , as others have said , that's why they are there ! Quote Link to comment Share on other sites More sharing options...
51m0n Posted May 17, 2011 Share Posted May 17, 2011 [quote name='Bill Fitzmaurice' post='1234716' date='May 17 2011, 06:53 PM']Mine are whatever sounds best in the room I'm in. Since every room is different acoustically my settings are different in every room .[/quote] +1 right answer... Quote Link to comment Share on other sites More sharing options...
Blademan_98 Posted May 17, 2011 Share Posted May 17, 2011 Volume to 11 I tend to fiddle per location as above. Quote Link to comment Share on other sites More sharing options...
EssentialTension Posted May 17, 2011 Share Posted May 17, 2011 [quote name='alexclaber' post='1234846' date='May 17 2011, 08:35 PM']Fair enough! I hate messing with amps, hence my main rig has essentially no EQ and just a volume knob. And it's totally clean however you set that. But with a 2 or 3 band EQ, how hard is it to turn the bass knob up if it sounds thin, down if it sounds boomy, turn the treble knob up if it sounds dull, down if it sounds too bright, and turn the mids up if it sounds too mellow, down if it sounds too aggressive? It isn't exactly rocket science and could mean there are a lot more amps to choose from, not just the few whose default curve happens to suit you, your bass and your cab.[/quote] I do turn things up or down if I feel I need to and I don't need a lot more amps to choose from. Quote Link to comment Share on other sites More sharing options...
Big_Stu Posted May 18, 2011 Share Posted May 18, 2011 I'll throw it in here cos it might be interesting to someone. Many years ago when I bought my Nod Hiwatt it had been kept in a damp lockup for many years. About a year later a guy in the USA bought Jim Lea's old flight case (without the bass) which had been kept in the same lockup. When it arrived there were a few odds n sods in it, picks, loose strings etc and this .............. A note from Nod to the roadies with his amp (now my amp) settings written on it, so the new case owner sent the note to me to be kept with the receipts. Not much physical use though; he played guitar thru the Brill channel. Quote Link to comment Share on other sites More sharing options...
paul_5 Posted May 19, 2011 Share Posted May 19, 2011 depends on too many things; room, which drummer/guitarist/singer i'm working with and also material. If i'm just playing 'on me tod' then the bass is untouched, boost of about 6db at 1.6 and 5khz. Seems to work for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.