Jump to content
Why become a member? ×

TimR
 Share

Recommended Posts

So WD now do electrical contact, switch, potentiometer cleaner, whatever you want to call it.

 

Available at Amazon, Halfords, Screwfix etc.

 

Not sure if I'm late to the party. Just cleaned my amp and bass pots. 

 

Maybe there's a more suitable forum to put this in but probably crosses a few of them. 

 

https://www.wd40.com/products/contact-cleaner/

Link to comment
Share on other sites

Oh yes. I've used Servisol for years - which I believe is now rebranded as Kontakt? Which means searching for Servisol won't get you the results you might be after. 🤣The problem is finding it in the shops. I have 3 cans of it - with no straws. 🤣

 

The thread I saw had a few people suggesting using WD-40 with others saying NEVER use WD-40. 

  • Like 2
Link to comment
Share on other sites

1 hour ago, TimR said:

... NEVER use WD-40. 

 

unless it's contact cleaner, for cleaning contacts. Folk are so used (conditioned..?) to thinking of WD40 as a rust remover et al, it's not (yet...) in the Public Psyché to imagine that they do, now, make a contact cleaner. It's so easy, though, to reach for the wrong can; I use KF2 (I'm in France...), or Kontact. Both are very good; WD40 may well be, but my can lasts so long, I may never get to try it out. :$

  • Like 3
  • Sad 1
Link to comment
Share on other sites

2 minutes ago, chris_b said:

WD-40 is a lubricant, rust preventive, penetrant and moisture displacer.

 

It's not a switch cleaner.

Did you miss the bit in the original post, with a helpful link included, saying they've launched a WD40-branded switch cleaner?

 

Screenshot_20231217-235145.thumb.png.18616ed070fe0d173d6231ecfe0ae738.png

Edited by mike257
  • Like 2
Link to comment
Share on other sites

5 hours ago, chris_b said:

OK, so the new WD-40 does clean switches.

 

The old one didn't.

 

Make sure you are using the right one.

They've branched out and now make a range of products, from silicone spray to brake cleaner, and still make the original water deterrent.

Link to comment
Share on other sites

29 minutes ago, MungoBass said:

 

I can relate to that! Where do the little blighters go?!?! 

 

I bought a couple of cans of Servisol a few years ago that didn't come with straws. I emailed them and they sent me a bundle. Might be worth a try.

Edited by ahpook
  • Like 1
Link to comment
Share on other sites

There was a can of WD-40 contact cleaner in the goody bag at the Screwfix Show last year.

I don't think I've used it; I've still got a half-full Maplin one.

It is one of a range of WD-40 products, but the name has tended to be a bit Hooverised to refer to the original penetrating oil.

https://www.wd40.com/products/

 

(Back in the day, the bass guitar used to be called the The Fender Bass.)

Edited by prowla
  • Like 1
Link to comment
Share on other sites

2 hours ago, prowla said:

... to refer to the original penetrating oil

Apologies for the pedantry but "WD" actually stands for water displacement.

 

Yes, it lubricates. Yes, people use it to try to free up rusty parts. However you'd do much better with a dedicated penetrating fluid like Plus-Gas if your nuts are seized up :)

  • Like 3
  • Haha 1
Link to comment
Share on other sites

3 hours ago, prowla said:

(Back in the day, the bass guitar used to be called the The Fender Bass.)

 

TBH I don't think I've ever heard a Bass Guitar being called that unless it actually had a "Fender" logo on the headstock.

 

When I was getting into music in the early 70s the bands I liked were more likely to be be sporting bass guitars by Rickenbacker or Gibson as they were Fender.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...