Jump to content
Why become a member? ×

Post your pedal board - Basschat style!!


dudewheresmybass

Recommended Posts

[quote name='ratman' timestamp='1394797150' post='2395316']
Here are the latest incarnations of my two boards. I'm still hankering after a Vintage Microtubes for the big board, and the Mooer on the small board isn't doing it for me, so that'll be swapped for something else soon.
[/quote]

I had the green mile, though it was absolutely crap.
The bb preamp took its place

Link to comment
Share on other sites

[quote name='Prime_BASS' timestamp='1395092871' post='2398679']
I had the green mile, though it was absolutely crap.
The bb preamp took its place
[/quote]

Too right, it's awful. Even using some dry blend doesn't help.

Link to comment
Share on other sites

Wow, some serious pedal boards here.....



Here's my few bits and pieces (listed in my signature below). Thinking of replacing ODB3 and Bass Driver DI with single Bass Driver Deluxe, probably don't need a noise suppressor either (hang over from guitar playing days).

Edited by stevetdunn
Link to comment
Share on other sites

  • 2 weeks later...

Really chuffed with my 1st Cog pedal, certainly there will be more to come! Also, new Lava Tightrope cables, great system! Can finally fit all the pedals I wanted in this board!

[URL=http://s8.photobucket.com/user/1976fenderhead/media/Pedalboards/IMG_20140405_213448.jpg.html][IMG]http://i8.photobucket.com/albums/a2/1976fenderhead/Pedalboards/IMG_20140405_213448.jpg[/IMG][/URL]

Link to comment
Share on other sites

Guest FretNoMore

Made a couple of changes this weekend; changed out some dirt in the lower left corner (Solid Gold FX
is new, Cusack Screamer Bass replaced a Wampler Euphoria in the Wonderlove loop) and swapped
places on the Suhr Buffer (now first) and [sfx] Micro Thumpinator (now last).



Edited by FretNoMore
Link to comment
Share on other sites

[quote name='FretNoMore' timestamp='1396794580' post='2417387']
Made a couple of changes this weekend; changed out some dirt in the lower left corner (Solid Gold FX
is new, Cusack Screamer Bass replaced a Wampler Euphoria in the Wonderlove loop) and swapped
places on the Suhr Buffer (now first) and [sfx] Micro Thumpinator (now last).




[/quote]

How is the solid gold overdrive, seen it a few times on the bay and dig the design.
What sort of circuit is it, if you know?

Link to comment
Share on other sites

Guest FretNoMore

No, I don't know anything about the circuit. Soundwise, it's a quite "polite" overdrive for lack of better words, touch sensitive, has a bit of low end boost but doesn't muddy the sound. Gives the sound a fatter character without being too obviously distorted if that makes sense. I haven't tried it with the band yet, but I think there are a couple of ballsier blues numbers where it should fit.

Link to comment
Share on other sites

Here's my board presently, and I cant see it changing for a while to be honest - I love it! Its monstrous live and really fattens up our 3 piece!! Very happy with the Grand Tarkin, which is unmoded but has a bit of extra heft added!! :D

[attachment=159660:TarkinDay.jpg]

And a night time shot:

[attachment=159661:Tarkin Night.jpg]

I'll try and snap better pictures soon!!

Edited by Salt on your Bass?
Link to comment
Share on other sites

[quote name='FretNoMore' timestamp='1396794580' post='2417387']
Made a couple of changes this weekend; changed out some dirt in the lower left corner (Solid Gold FX
is new, Cusack Screamer Bass replaced a Wampler Euphoria in the Wonderlove loop) and swapped
places on the Suhr Buffer (now first) and [sfx] Micro Thumpinator (now last).




[/quote]

Nice tidy board dude - looks good. B)

Link to comment
Share on other sites

This is my current mini board, of clones :)
Optical compressor > Pear OC-7 (octave) > SFT type overdrive > Mu-Tron Micro V filter > 'Prunes & Custard'


[URL=http://s1087.photobucket.com/user/nickonbass69/media/Pedal%20Builds/pedalboard001_zps58a02ae2.jpg.html][IMG]http://i1087.photobucket.com/albums/j476/nickonbass69/Pedal%20Builds/pedalboard001_zps58a02ae2.jpg[/IMG][/URL]

Link to comment
Share on other sites

[quote name='nick' timestamp='1396906428' post='2418723']
This is my current mini board, of clones :)
Optical compressor > Pear OC-7 (octave) > SFT type overdrive > Mu-Tron Micro V filter > 'Prunes & Custard'


[url="http://s1087.photobucket.com/user/nickonbass69/media/Pedal%20Builds/pedalboard001_zps58a02ae2.jpg.html"][/url]
[/quote]

Great board, whats the opti comp based on?

Link to comment
Share on other sites

[quote name='FretNoMore' timestamp='1396794580' post='2417387'][/quote]
[quote name='FretNoMore' timestamp='1396812449' post='2417626']No, I don't know anything about the circuit. Soundwise, it's a quite "polite" overdrive for lack of better words, touch sensitive, has a bit of low end boost but doesn't muddy the sound. Gives the sound a fatter character without being too obviously distorted if that makes sense. I haven't tried it with the band yet, but I think there are a couple of ballsier blues numbers where it should fit.[/quote]

Good description of the Beta, I find it to be the only overdrive I've used that can handle a really hot signal going in (like a Ray4 with the bass knob whacked up full) without overloading and farting out. Great pedal for blues / R&B.

I've been thinking of picking up the Cusack Screamer also, what's your take on that one?

Edited by dannybuoy
Link to comment
Share on other sites

[quote name='nick' timestamp='1396906428' post='2418723']
This is my current mini board, of clones :)
Optical compressor > Pear OC-7 (octave) > SFT type overdrive > Mu-Tron Micro V filter > 'Prunes & Custard'


[URL=http://s1087.photobucket.com/user/nickonbass69/media/Pedal%20Builds/pedalboard001_zps58a02ae2.jpg.html][IMG]http://i1087.photobucket.com/albums/j476/nickonbass69/Pedal%20Builds/pedalboard001_zps58a02ae2.jpg[/IMG][/URL]
[/quote]

What's the micro mutron like for bass? Was never able to find any clips for it, other than for guitar...

Edited by Bigwan
Link to comment
Share on other sites

[quote name='nick' timestamp='1396906428' post='2418723']
This is my current mini board, of clones :)
Optical compressor > Pear OC-7 (octave) > SFT type overdrive > Mu-Tron Micro V filter > 'Prunes & Custard'


[url="http://s1087.photobucket.com/user/nickonbass69/media/Pedal%20Builds/pedalboard001_zps58a02ae2.jpg.html"][/url]
[/quote]

Don't see many P&C clones around. Is it from Poodle's Pedal Parts?

Link to comment
Share on other sites

[quote name='nick' timestamp='1396906428' post='2418723']
This is my current mini board, of clones :)
Optical compressor > Pear OC-7 (octave) > SFT type overdrive > Mu-Tron Micro V filter > 'Prunes & Custard'

[URL=http://s1087.photobucket.com/user/nickonbass69/media/Pedal%20Builds/pedalboard001_zps58a02ae2.jpg.html][IMG]http://i1087.photobucket.com/albums/j476/nickonbass69/Pedal%20Builds/pedalboard001_zps58a02ae2.jpg[/IMG][/URL]
[/quote]


Always good to see a board of diy, some great choices too :-)

Edited by TG Flatline
Link to comment
Share on other sites

Guest FretNoMore

[quote name='dannybuoy' timestamp='1397031948' post='2419826']

I've been thinking of picking up the Cusack Screamer also, what's your take on that one?
[/quote]

A good pedal too, a bit more versatile since it has three different clipping modes, though I have only really used the middle position which is the least compressed. The three pedals I have are all nice for low gain sounds, they all have a "fine-grained" drive character (as opposed to some crackling or breaking glass type metal dist), the Beta is the darkest voiced, the VMT more high mids and the Screamer somewhere inbetween them. I like the Beta the best because it doesn't change the mids as much as the others, and I like the responsiveness.

Link to comment
Share on other sites

Just finished this, my first board:

[IMG]http://i62.tinypic.com/71tyya.jpg[/IMG]

It's more of a practical 'gather all my floor stuff in one place' board, than a vast array of freaky sounds. I'm not an effects whiz. There is space for an additional pedal in the top right corner, when I can think of something I might use.

There's a build thread in the 'Build Thread' thread. The board casing is Walnut, oiled and waxed. The lid is 12mm ply, and the base is MDF.

thank you please

RK

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...