Ant Posted June 6, 2017 Share Posted June 6, 2017 recently moved from a pedaltrain JR up to the Novo 18, slightly raised the back feet so my two preamps could sit underneath the board, allowing me to cram a few more effects up top [IMG]https://image.ibb.co/gw9TLv/image2.jpg[/IMG] [IMG]https://image.ibb.co/jEXF0v/image7.jpg[/IMG] [IMG]https://image.ibb.co/dT1a0v/image1.jpg[/IMG] i do have an additional gigrig timelord isolated adaptor on the way as i'd heard the whammy is noisy when sharing a power supply, but i don't seem to be having any noise issues with mine? Quote Link to comment Share on other sites More sharing options...
bobbass4k Posted June 7, 2017 Share Posted June 7, 2017 [quote name='Bigwan' timestamp='1493366030' post='3287742'] It's probably been asked before but... what is it all? [/quote] Gah, I was hoping no one would ask... From L-R, Top to bottom (with vague description) - Bare with lots of small knobs - Sequencer that puts out CV to drive the LFO on the Pitch Pirate/Phaser/A few others Orange - Auto swell, a la Slow Gear Purple/White Knobs - EQD Bit Commander Clone Bare/Multi Coloured Knobs - Very quirky gated fuzz, based on the 4ms noise swash but with a few tweaks Half Bare/Half terribly painted - Tweaked Mantic Vitriol/DOD Grunge clone Blue/Black Knobs - EQD Sea Machine Chorus Clone Bare/Blue,Red,White Knobs - Tweaked Mid Fi Pitch Pirate Red/Painted by a shroomy donkey - Digital Delay with super deep modulation/gain section and momentary oscillation Black/Old PA knobs - Rusty Box clone Bare/Blinky - Rattle Crow clone Blue/Black knobs - Tweaked Mastotron Clone Pink/White Knobs - Heavily tweaked Rat Big Purple -Uber phaser/Lovetone Doppelganger clone Black/Perverb - DBA Reverberation Machine Clone Black/Orange paint - Tweaked DOD FX25 Clone Bare/2 knobs - Phat Phuk B Clone Bare/Green Knobs - Tweaked Forest Green Compressor Clone I think that's all of them... Quote Link to comment Share on other sites More sharing options...
Bearfist Posted June 7, 2017 Share Posted June 7, 2017 Finally got the new board set up. [attachment=246864:IMG_3460.JPG][attachment=246865:IMG_3461.JPG][attachment=246866:IMG_3462.JPG] Quote Link to comment Share on other sites More sharing options...
elephantgrey Posted June 13, 2017 Share Posted June 13, 2017 (edited) I've been through quite a few tweaks since I've last posted here. Here's my 'essentials' board (+RC50 and GBC). I'm currently thinking of replacing the TimeFactor with a CB Tonal Recall and either a meris Mercury 7, or a SA Ventris. Edit: sorry about the head tilting, can't seam to rotate the photo on my phone. Edited June 13, 2017 by elephantgrey Quote Link to comment Share on other sites More sharing options...
VAMPYRE 5 Posted June 27, 2017 Share Posted June 27, 2017 (edited) Toys... 😄 Edited June 28, 2017 by VAMPYRE 5 Quote Link to comment Share on other sites More sharing options...
madame clapotis Posted July 1, 2017 Share Posted July 1, 2017 [quote name='andybassdoyle' timestamp='1493459130' post='3288453'] Here's my latest iteration. Be really interested in any feedback folks. Signal chain is: Ls2 Oc2 Subterranea Fimpact Syb5 Pitchfork Beef bag (meatbox) Freq box Orbit gated fuzz Frantabit Lpf Mf trem Xerograph Volume pedal Then back to the ls2 Finally nova repeater which lives off the board The reflex controls the pitchfork, syb5, freq box, mf trem and Xerograph (via the broadcast) [attachment=244303:20170429_141926.jpg] Very interested on thoughts re the chain.. [/quote] That looks like a very fun and synthy board to me! Where did you get that Beefbag from? Quote Link to comment Share on other sites More sharing options...
andybassdoyle Posted July 1, 2017 Share Posted July 1, 2017 Picked the beefbag up here, I don't think they make them any more. Really like it though, not sure how it compares to the meatbox but lots of fun dialing in subs from it... Quote Link to comment Share on other sites More sharing options...
sk8 Posted July 3, 2017 Share Posted July 3, 2017 Latest [URL=http://s420.photobucket.com/user/spongebob_sqaurepants/media/509BAE79-E5AC-4225-B3E9-9CCDDA56C7BF_zpsmc8hwpa8.jpg.html][IMG]http://i420.photobucket.com/albums/pp287/spongebob_sqaurepants/509BAE79-E5AC-4225-B3E9-9CCDDA56C7BF_zpsmc8hwpa8.jpg[/IMG][/URL] Quote Link to comment Share on other sites More sharing options...
Kev Posted July 3, 2017 Share Posted July 3, 2017 Recent addition of Cali76-TX (replacing Super Symmetry) forced a Power Supply rethink, as I refused to pay £59 to make the Gigrig Generator output 18v(!!) So, grabbed one of the Memteq units off Amazon for £25 odd and I'm impressed. Noise free, no obvious disadvantage over the Gigrig on a little board like this, and it gives the transformer in the Cali the juice it needs. Satisfied Quote Link to comment Share on other sites More sharing options...
franzbassist Posted July 3, 2017 Share Posted July 3, 2017 (edited) Just put together a very nice Metro 16 board As I play upright and electric at every gig, I use a fabulous Providence Dual Bass Station as my go to eq/switching/volume balancing unit for some time, also running a tuner in the dedicated output. I've wanted to add some OD and chorus to the electric input and some compression to the DB for some time, so having shopped around I picked up a few second hand pedals and [i]voila[/i], a new board is born! That said, having done some more research, I've decided to replace the compressor with a 4114 HPF, which should deal with DB feedback better. As the Dual Bass Station runs on 12V DC and all the other pedals are 9V DC, I decided to go with a single power supply to neaten everything up, and following advice from the BC massive I chose the Cioks Adam, which fits the bill perfectly. No hum at all, and I've drilled the PT and mounted it using the supplied bolts. I've used heavy duty velcro rather than the PT stuff to stick everything down, and cables are the rather excellent Evidence Audio Monorail: I've had George L's before but I have to say these are a step above. Anyway, here are the pics! Edited July 3, 2017 by walbassist Quote Link to comment Share on other sites More sharing options...
sk8 Posted July 4, 2017 Share Posted July 4, 2017 Well that escalated quickly [URL=http://s420.photobucket.com/user/spongebob_sqaurepants/media/8B075006-01F6-4E86-B47F-CB23E8E327FF_zpsfbkzfoye.jpg.html][IMG]http://i420.photobucket.com/albums/pp287/spongebob_sqaurepants/8B075006-01F6-4E86-B47F-CB23E8E327FF_zpsfbkzfoye.jpg[/IMG][/URL] Quote Link to comment Share on other sites More sharing options...
HazBeen Posted July 5, 2017 Share Posted July 5, 2017 With DSP now being (for me) at an acceptable level it has enabled me to get rid of pretty much all non-dirt pedals in favour of the new Zooom B3n. So the setup is now much compacter but still gives me pretty much what I need. My Future Impact is not in the picture, I use it standalone. [URL=http://s87.photobucket.com/user/welcometombh/media/IMG_1122_zps071nqjjk.jpg.html][IMG]http://i87.photobucket.com/albums/k147/welcometombh/IMG_1122_zps071nqjjk.jpg[/IMG][/URL] Quote Link to comment Share on other sites More sharing options...
BigBassBob Posted July 14, 2017 Share Posted July 14, 2017 (edited) [url="http://smg.photobucket.com/user/BigBassBob/media/19959138_10155925964641874_3254942101613661996_n.jpg.html"][/url] [url="http://smg.photobucket.com/user/BigBassBob/media/19989504_10155925964821874_5125114959794348666_n.jpg.html"][/url] Upgraded my B7K to a B7K Ultra and changed the Turbo Turbo ST-200 to an ST-300 (with the 200 going on my guitar board). Edited July 14, 2017 by BigBassBob Quote Link to comment Share on other sites More sharing options...
Salt on your Bass? Posted July 15, 2017 Share Posted July 15, 2017 (edited) My current board. Due to undergo a bit of a change over the next few weeks but works well enough Edited July 29, 2017 by Salt on your Bass? Quote Link to comment Share on other sites More sharing options...
blablas Posted July 15, 2017 Share Posted July 15, 2017 [quote name='blablas' timestamp='1494077682' post='3293064'] [/quote] It keeps on mutating, current version. The Boss Loop Station is there temporarily, waiting for a Night Wire tremolo by EarthQuaker Devices to fill this place on the board. The Loop Station will be used separate from the board once the Night Wire is in. Quote Link to comment Share on other sites More sharing options...
SimonEdward Posted July 16, 2017 Share Posted July 16, 2017 (edited) Pedalboard update: using GATOR GPT 16.5 x 12 with a recently acquired FAME DC8 to power it all up. Fairly settled line up.. with 'always on' Or occasionally used pedals (i.e. tuner) on top.. and frequently used / swapping out ~ except for looper ~ on the bottom row. Interconnects are all sorts ~ low profile 'pancake' + van damme + solderless diago. Edited July 16, 2017 by SimonEdward Quote Link to comment Share on other sites More sharing options...
lee650 Posted July 17, 2017 Share Posted July 17, 2017 That power supply looks interesting! And I'm in the market for a new one. How do you find it? I take it will fit under a Pedaltrain? Quote Link to comment Share on other sites More sharing options...
SimonEdward Posted July 17, 2017 Share Posted July 17, 2017 (edited) [quote name='lee650' timestamp='1500293558' post='3336688'] That power supply looks interesting! And I'm in the market for a new one. How do you find it? I take it will fit under a Pedaltrain? [/quote] The FAME DC8 (also known as VITOOS DC8) is slightly smaller than a compact size pedal; Please check dimensions: - Width: 141mm; Depth: 71mm; and Height: 32mm. Price is £53 [u]INCLUDING[/u] VAT - postage extra. I bought mine from DV247.com >> [url="http://www.dv247.com/guitars/fame-dc8-multi-power-supply-for-pedal-boards--234581"]http://www.dv247.com...-boards--234581[/url] Edited July 17, 2017 by SimonEdward Quote Link to comment Share on other sites More sharing options...
dannybuoy Posted July 17, 2017 Share Posted July 17, 2017 That should JUST about for under a PT Metro/Nano but I would try and raise the feet on the board by a couple of mm for clearance. I just looked up the Cioks DC5 and that is 31mm, which is already ever so slightly too tall - on a perfectly flat hard floor with the PSU in the middle, my Metro 24 rocks slightly. This Fame unit is 1mm taker than that at 32mm. Quote Link to comment Share on other sites More sharing options...
Byo Posted July 17, 2017 Share Posted July 17, 2017 [quote name='sk8' timestamp='1499083926' post='3329005'] Latest [URL=http://s420.photobucket.com/user/spongebob_sqaurepants/media/509BAE79-E5AC-4225-B3E9-9CCDDA56C7BF_zpsmc8hwpa8.jpg.html][IMG]http://i420.photobucket.com/albums/pp287/spongebob_sqaurepants/509BAE79-E5AC-4225-B3E9-9CCDDA56C7BF_zpsmc8hwpa8.jpg[/IMG][/URL] [/quote] That Noble DI... Great piece of kit Quote Link to comment Share on other sites More sharing options...
BigBassBob Posted July 17, 2017 Share Posted July 17, 2017 Reposting because Photobucket has changed. [color=#282828][font=helvetica, arial, sans-serif]Upgraded my B7K to a B7K Ultra and changed the Turbo Turbo ST-200 to an ST-300 (with the 200 going on my guitar board). [/font][/color] Quote Link to comment Share on other sites More sharing options...
sk8 Posted July 19, 2017 Share Posted July 19, 2017 [quote name='Byo' timestamp='1500326637' post='3337012'] That Noble DI... Great piece of kit [/quote] It really is. Pricey but the combination of a Pedal power supply, DI and Tube Preamp is just a great package. Can't do without it now. Quote Link to comment Share on other sites More sharing options...
blablas Posted July 22, 2017 Share Posted July 22, 2017 (edited) [quote name='blablas' timestamp='1500128941' post='3335801'] It keeps on mutating, current version. The Boss Loop Station is there temporarily, waiting for a Night Wire tremolo by EarthQuaker Devices to fill this place on the board. The Loop Station will be used separate from the board once the Night Wire is in. [/quote] The Night Wire is in, also added a Electro Harmonics Canyon, as if I did not have enough delays already. Gone is the Mooer envelope. The Night Wire is brilliant, so much more than just a tremolo! The Canyon has some very useful functions the other two delays and reverb don't have. Edited July 22, 2017 by blablas Quote Link to comment Share on other sites More sharing options...
CameronJ Posted July 23, 2017 Share Posted July 23, 2017 The latest version of my board: Quote Link to comment Share on other sites More sharing options...
Bearfist Posted July 24, 2017 Share Posted July 24, 2017 Still a work in progress but this is me just now... [attachment=249742:IMG_3611.JPG] And the mess... [attachment=249741:IMG_3616.JPG] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.