Ant

What ever happened to this wonderful Gigantic cab, I must have it

i also use zip ties, they only work on true bypass pedals (so they remember when theyre on and off) not the buffered bypass ones which revert to off when powered up i just snip them off if i need to change anything about [IMG]http://i64.tinypic.com/11bpuhl.jpg[/IMG]

recently moved from a pedaltrain JR up to the Novo 18, slightly raised the back feet so my two preamps could sit underneath the board, allowing me to cram a few more effects up top [IMG]https://image.ibb.co/gw9TLv/image2.jpg[/IMG] [IMG]https://image.ibb.co/jEXF0v/image7.jpg[/IMG] [IMG]https://image.ibb.co/dT1a0v/image1.jpg[/IMG] i do have an additional gigrig timelord isolated adaptor on the way as i'd heard the whammy is noisy when sharing a power supply, but i don't seem to be having any noise issues with mine?

8 x 12 madness

you definitely CAN use both together, sounds to me you just dont like the sound of them combined, i'd probably just swap out the sansamp for another preamp

ive always understood "heft" as more of a weighty term, like the weight/punch of a note if we're talking about tone or a big hefty amp if it weighs a ton/is massive etc

[color=#141414][font=verdana, geneva, lucida,] picked up a new line selector from Tom over at COG so i can switch between two different settings/amounts of parallel blend on my suncoast b1p preamps, setting 1 has the more overdriven pre lower in the mix, whilst setting 2 brings it forward[/font][/color] [color=#141414][font=verdana, geneva, lucida,] [IMG]http://i64.tinypic.com/30jtrh4.jpg[/IMG][/font][/color] [color=#141414][font=verdana, geneva, lucida,] [IMG]http://i68.tinypic.com/243q6ti.jpg[/IMG][/font][/color]

the old boss pq-3b is very good for this

thanks guys! and would i just simply cut it out and stick it (staple or adhesive i imagine?) to the inside walls and back?

Thanks bill, will dampening the cab myself be an easy job? What kind of material is best / what kind of tonal changes can I expect?

[quote name='hubrad' timestamp='1460631682' post='3027382'] That rear view pic looks they're wired as 2 pairs in parallel, each pair being in series. Basically that means that if the individual drivers ar, say 8Ohms, each pair will show as 16 but then the two pairs in parallel will make 8 again. So whatever the individual impedance (assuming all the same), that's the imp. of the cab. Power handling is double that of one speaker, as a series pair can only handle the single amount whereas a parallel pair will split it between them. Again assuming all the same impedance drivers. Eminence usually have a little white label on with the impedance, usualy on the side face of the magnet.. owt like that? [/quote] im not with the cab right now but will check for the little label later on! thanks a lot

[color=#141414][font=verdana, geneva, lucida,]Just picked up a Marshall 412 bass cab and just trying to dig up some history on it, I'm not sure it's all original as the circular badge on the back says its 100w but it's loaded with 4 eminence drivers which don't look too old, but then i know these cabs are notorious for being mislabelled.[/font][/color] [color=#141414][font=verdana, geneva, lucida,]I just got it to beat around on tour so I'm not bothered about it being original, but I have no idea about ohmage etc or what kind of power I can push through it safely, looking up the drivers online seems to suggest 250w each.[/font][/color]

[quote name='bassmayhem' timestamp='1460055344' post='3022224'] My new Temple Audio board with the pedals mounted. No cables yet... [/quote] i love seeing someone else using the suncoast! its my favourite preamp,

[color=#141414][font=verdana, geneva, lucida,] been waiting to get this one together for a while now, just picked it up after leaving with my "go to" luthier/tech man[/font][/color] [color=#141414][font=verdana, geneva, lucida,] this was put together to be the ultimate touring workhorse, for gig after gig after gig.[/font][/color] [color=#141414][font=verdana, geneva, lucida,] Slab Precision Bass body (quite light, parted out from someones bass who had created a fully faithful tribute to the old fender slab precisions, but then parted it out after acquiring an original, if i remember correctly) neck pocket had been widened for the previous neck, so has a bit of a gap, but its only cosmetic and i kind of like the janky look.[/font][/color] [color=#141414][font=verdana, geneva, lucida,] original oldschool (i believe) fender precision pickguard with the metal plate underneath.[/font][/color] [color=#141414][font=verdana, geneva, lucida,] Dimarzio DP122 model p pickups, mid heavy p bass pickups - the only type i play[/font][/color][color=#141414][font=verdana, geneva, lucida,] pickups are wired straight to volume (no tone control) and then to jack.[/font][/color] [color=#141414][font=verdana, geneva, lucida,] Leo Quan Badass II bass bridge - i have these on all of my basses, this is the type with the pre slotted saddles.[/font][/color] [color=#141414][font=verdana, geneva, lucida,] Limelight medium relic 75' style jazz bass neck, rosewood fret board with block inlays and fretboard binding[/font][/color] [color=#141414][font=verdana, geneva, lucida,] reverse tuners - i don't think they would've been standard on this neck, but its something i much prefer.[/font][/color] [color=#141414][font=verdana, geneva, lucida,] [IMG]http://i64.tinypic.com/15fndys.jpg[/IMG][/font][/color][color=#141414][font=verdana, geneva, lucida,] [IMG]http://i64.tinypic.com/4twod3.jpg[/IMG][/font][/color][color=#141414][font=verdana, geneva, lucida,] [IMG]http://i66.tinypic.com/m8zo7a.jpg[/IMG][/font][/color][color=#141414][font=verdana, geneva, lucida,] [IMG]http://i65.tinypic.com/beskd3.jpg[/IMG][/font][/color]

not strictly a full limelight, but here is my slab precision build utilising a limelight jazz neck in a medium relic [attachment=214498:image1.JPG][attachment=214499:image2.JPG][attachment=214500:image3.JPG][attachment=214501:image4.JPG]

Cog effects knightfall has a nice bit of grind to it, the normal version has a blend so you can dial it in/out to taste. but if youre already liking the screamer sound, maybe look for something tubescreamer based, or similar to? COG darklighter maybe? fulltone bassdrive? xotic bass BB? there are loads

thanks for all the quick and detailed replies guys!!! [quote name='alexclaber' timestamp='1452025359' post='2945709'] Awful! However, on the plus side as long as you don't play it until it's COMPLETELY DRY it'll almost certainly be absolutely fine. Take it somewhere warm, safe and dry. Take the grill off. Take the woofers out and put them somewhere safe and well aired. If the insulation/damping is soaked/dirty I'd pull all that out (note where each bit goes), collect up all the staples (they're not much fun to stand on and you don't want them loose in the cab), and hang that up somewhere to dry. Once everything is bone dry - like not at all damp, like washing that's been in the tumble drier for too long - then vacuum the insulation and inside of the cab and brush any dirt off the cones with a soft brush. Staple/silicone the insulation back in. Re-fit the woofers (make sure their polarity is correct - marked cable to the red terminal) taking care not to push out any t-nuts (use a G-clamp to push them back in if they've come loose), and test the cab before putting the grill back on. If you try to use the cab whilst the cones are still damp they will fall apart. But as long as you wait for it to dry out it should be sonically as good as it was before its aquatic experience. Worst case scenario there'll be too much corrosion on the motor pole pieces but I think you'd have to have it submerged for years to manage that. I'd put some light oil on all the hardware (not the woofers!) to stop things rusting in the future. [/quote] cheers alex, this seems simple enough to follow even for me - ill try this and hope for the best

Was away over Christmas and our lockup / rehearsal space totally flooded, my barefaced super 15 was almost entirely submerged for an unknown length of time (days I think) It was one of my friends who pulled it out of the more and messaged me saying it will full of slime and crap, no insurance cover or anything so in probably just down a cab, but is there ANYTHING I can do to get it working again (as cheap as possible as we have no money and have to replace plenty of equipment)

got this little email from the builder, if anyone was wondering about the controls [quote] Hi Anthony! Some information: The pedal has two modes of clipping: GAIN1 and GAIN2. GAIN1 - hard GAIN2 - soft Combine different positions of these regulators for different sounds. Do not use for this purpose knob VOLUME !!! Only for setting the same level of the direct signal (OFF) and processed signal (ON) (typically between 10 hours - 2 hours). About tone control. In this model, I used a passive tone control like Marshall JCM 800. Here is very well said about this: [url="http://www.google.com/url?q=http%3A%2F%2Flutz-haake.de%2Fmusic%2Fquestfortone%2Fclassictonestacks.html&sa=D&sntz=1&usg=AFQjCNHrUgx1UV5KVL2Xz6uJguaLe8uilQ"]http://lutz-haake.de/music/questfortone/classictonestacks.html[/url] [/quote] also, could anyone forward me Ryans demo of the pedal? i sent him a message but havent heard back

im very interested in this, can anyone measure its width? (with jacks if possible)

i use a demeter minnie 800d VERY small and light and ive never even had it past halfway