Roasted vs Standard necks - Stability?

[martthebass]

Just coming from the Short Scale Bass appreciation thread and noticed some comments coming up regarding roasted necks and stability of roasted, caramelised and standard necks.  Rather than hijack that thread I thought a separate thread to discuss might be beneficial.

 

For myself I've got 2 basses with roasted necks (EBMM DarkRay and EBMM Shorty Ray), 1 bass with a graphite neck (Status CW-1) and one with a standard maple neck.  Of these the most stable is the Status (no surprise there), which was adjusted when I bought it over 4 years ago and never touched since, the next are the Sandberg and the DarkRay which I've tweaked twice in the last year and the worst is the shorty Ray which seems to move a little bit from month to month.  A small sample group but not seeing a major difference which makes me think there are a number of factors at play.... 

Edited 6 hours ago by martthebass

[LeftyJ]

I have no basses or guitars with roasted necks, but I do have 2 cents about Music Man necks moving: I had a Stingray 5 which was very susceptible to changes in humidity, and would move quite a bit with the change of the seasons, but it got a LOT more stable when I had the neck re-waxed by my favourite luthier. The Music Man necks are oiled / waxed rather than lacquered, which should seal the wood just the same against humidity, but unlike lacquer an oiled / waxed neck does require regular maintenance. 

[tubbybloke68]

My stingray neck needs adjustment quite often, it’s roasted (pretty sure anyway) . It’s one of the later ones, charcoal sparkle, yet my USA Sterling is very stable and a fair bit older. They’re both stored in the same room in the house too. X

[Geek99]

@tubbybloke68

”made in USA” equals “magic wood. “ ✨🦄

[Twigman]

My EBMM USA Sterling has a 'normal' oiled neck and never needs tweaking. I only ever need to adjust the tuning when I change the strings!

[Beedster]

I've had cheap necks that have been perfect and never needed a tweak, and expensive necks that were always slightly out. While of course quality materials and high standards of manufacture are protective, there's always going to be the odd bit of temperamental wood that gets through the process, and I guess it's possible that various treatments - roasted etc - might lower the risk os those that do being a complete PITA. But on the whole, if you keep your necks in fairLy consistent humidity and temperature, and don't change string tension or gauge too often, you really shouldn't have to touch your necks very often once set up.  

[martthebass]

19 minutes ago, Beedster said:

But on the whole, if you keep your necks in fairLy consistent humidity and temperature, and don't change string tension or gauge too often, you really shouldn't have to touch your necks very often once set up.  

I wish that was always the case Chris 😞

[Beedster]

1 minute ago, martthebass said:

I wish that was always the case Chris 😞

 

It's been my experience, perhaps I've either been lucky or have lower standards  

[neepheid]

Wood be woody.