Jump to content
Why become a member? ×

Which strings do you use?


thumbo
 Share

Recommended Posts

I've had DR Marcus Miller Fatbeams on my Aerodyne Jazz since last Feb and they are fantastic! Bright yet mellow. I've slapped some black beauties on my mia jazz, just to see what they're like. It looks good on a maple board but I'll see what they sound like (more importantly).

Link to comment
Share on other sites

Elixir Nanowebs on everything ( 45-105 with a 32 C string and taperwound 130 low B string) except LaBella Beatle Bass flatwounds on my Alden violin bass copy and a mix of Ashbory and Mike Tavener strings on my Ashbory ( I would have Elixirs on everything if they did flatwounds and rubber strings but they don't)

Cheers
Alun

Edited by Alun
Link to comment
Share on other sites

[quote name='paul, the' post='11057' date='Jun 2 2007, 03:24 PM']Oh, quick question for anyone:
What's the lower limit on importing outside the EU?
A set of strings costing £29 (that's with postage) from America, would they charge duty/customs/whatever?
Cheers,

Paul.[/quote]

i think the duty limit is around about the £30 mark, but they're not always consistent about it (ie sometimes you'll get away with a higher value. i my experience though, you should be ok with 1 set of strings. I bought 3 sets of DR Hi-Beams once, and did pay import duty & vat on them, declared value was around 65usd.

so, while I'm on the subject can anyone tell me the difference in sound between the HiBeams and the Sunbeams?

I've liked the Hi-Beams but find them a bit too bright, and a little rough to the touch. I really liked the sound and feel of Elixir Nanowebs, but they are rather expensive - luckily I didn't pay for them as they were on a bass I bought. It sounds like they are a good long-life option though as long as you don't use a pick.

Link to comment
Share on other sites

[quote name='Gwilym' post='13929' date='Jun 7 2007, 11:40 PM']i think the duty limit is around about the £30 mark, but they're not always consistent about it (ie sometimes you'll get away with a higher value. i my experience though, you should be ok with 1 set of strings. I bought 3 sets of DR Hi-Beams once, and did pay import duty & vat on them, declared value was around 65usd.[/quote]

Thank you very much. It's hugely appreciated. I think I'll fork out for some Jazz Flats from America.

Link to comment
Share on other sites

[quote name='BeLow' post='11577' date='Jun 3 2007, 09:04 PM']I have used various makes but was impressed with Overwater Nickels - must buy some more soon.[/quote]

+1 on the Overwater Nickels - I find the nickel gives a warmer sound than the stainless steel and is a bit easier on the fingers too...

has anyone tried the Ritter Swordsteel? ordered a set just to give them a try, not had chance to fit them yet, maybe tomorrow...

Link to comment
Share on other sites

I'm thinking of buying some strings from the US and did some quick research on UK import duty.

Officially the maximum value before duty is payable is £18 on purchased items, or £36 on gifts. This doesn't include the postage cost.

The duty charge seems to be 3.5% up to £290, then VAT is also charged on top.

[url="http://tinyurl.com/2f5x7l"]http://tinyurl.com/2f5x7l [/url] (link to HM Revenue & Customs website)

Like Gwilym says, I've heard that this is not always applied consistently.

Link to comment
Share on other sites

Put on some Thomastik Superalloys. For the first time ever I've actually really liked the sound of my strings when new, they're bright but not brash/clangy. They are simillar to the D'addario nickels I used to use but better. They are pricey though and the string tension is quite high so I'm tempted to try DR strings (either fat beams or sunbeams, which are a supposedly a bit more flexible).

Link to comment
Share on other sites

  • 3 weeks later...

Just put my first set or Dr Sunbeams on my 55-01 and they feel great. Only played them through my PC to do some recording but very happy with them.
The first ting i thought was how quiet the B was. Until i realised its not that its quiet but very well balanced with the other strings. My usual low B tends to sound a bit thicker than the E but the Dr,s are very well balanced IMO
Ive been using Laklands for the past year but i think ill stick to the Dr's for a while.

Edited by dave_bass5
Link to comment
Share on other sites

[quote name='Muppet' post='26863' date='Jul 4 2007, 09:41 AM']Nice one Dave - you know it makes sense![/quote]

Well financially it doesn't but its only money.
The Laklands (which i do like by the way) normally cost me £24 for two sets. and these have a tappered B string as well. I cant remember what the Dr's cost but i know its a lot more.
Got them from the states so also takes a while to arrive. Better order some more now i guess.

Link to comment
Share on other sites

GHS Boomers on both the Jazz V and the P V beast, hate them when they are brand new, but settle down after a week or two and last about four/five months before they sound too dull.

Roto flats on the Ibanez fretless, cant remember the last time I changed them as the fretless gets very little playing time.

Link to comment
Share on other sites

  • 2 weeks later...

Currently I've moved away from Elixirs and am trying other stuff to see how they perform.

On my Peavey (P+J) I'm using Thomastik flats and I prefer them to Rotosound flats and D'Addario Chromes, they give me the sound I hear in my head. This fits in really well with the Duck Dunn lines that I play in the Blues Brothers tribute band.

On my Lakland 44-02 I have a set of DR Black Beauties which I've had for ages and they are superb - the slap sound I get with these isn't too bright and the feel of them is more tactile. I'll definitely buy another set at some point.

I've put a set of D'Addario halfrounds on my 55-02 just to see what they are like. They seem to me to be much more like rounds than they do like flats, I like the texture and the warm, mellow tone but in a swings and roundabouts way they are rubbish for slapping.

Link to comment
Share on other sites

I've bitten the bullet and put a set of Rotosound Jazz 77 flatwounds (45-105) on my Warwick. Recently I've been wanting a more vintage, thumpy sound as opposed to a hifi sound, and as I've got an approximate EQ I thought I'd back it up with a nice set of flats!

Initial impressions - they feel a lot different, even to the TI flats I have on my fretless, they're quite grippy actually which is a good thing. The tension is also noticeably higher than the rounds I used before, the D'Addario Prosteels. I find that playing nearer the neck helps even out the response that I was used to.

Haven't tried it through an amp yet, but through my Pandora PX4B it sounds great - no sharp high end, even when the treble is rolled up full, and a nice even response across the strings.

Happy customer here so far :)

Link to comment
Share on other sites

I've just wapped a load of Rotosound Nickel Swing Bass 66 on my Squire VMJ.

I'm undecided at the moment, they sound really nice, I like the warmer sound, but they're lacking a bit in tension I feel, might have to go up to 45-65-80-105 (or 85-105) to get the feel I want, which is odd, as I prefer the tension of the 45-100 Super Slinkies on my Aerodyne.

Link to comment
Share on other sites

I've been using DR Extras on all my basses for nearly a year now. None of the harshness of most stainless steel strings I've tried in the past but certainly are not lacking in the bright department while offering plenty of low-end thump too. Also feel very tonally balanced across all 5 strings.

They last for ages (I gig once or twice a week and play every day) compared to a standard set (which I usually had to change about once a month) but feel like a normal string despite the coating, plus they come in a range of funky colours which is cheaper than replacing your bass when you feel the need for a change! Cheap as chips from Thomann as long as you are happy with only black beauties, order via eBay if you want other colours. Little more pricey but still way cheaper than UK prices.

A word in for Lakland strings too, although taper is a problem for me as I prefer top-loaded rather than through body stringing. I especially like their nickel-wounds and ordering them via Lakland site is also very economical.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...