Jump to content
Why become a member? ×

All Activity

This stream auto-updates

  1. Past hour
  2. kwmlondon started following KiOgon j-bass type VVT loom that's been a bit "adjusted" to fit a Yamaha bass. Works great, yours for half price!
  3. kwmlondon
    I got this from our own KiOgon a few weeks ago and it was just as good as you'd expect... but I hadn't checked or discussed the layout of the Yamaha bass they were going in so had to solder a bit of extra cable to accommodate the wider spacing. Also had to take off the jack socket it came with to wire to the barrel one on the Yamaha. Now surplus to needs. Will sell for half the going price, posted. Any questions give me a shout.
  4. AlanG
    Many thanks for the advice and info. No offence meant to the seller and I have bought and sold a fair bit of guitars/amp/pedals etc over the years (don't all musicians have GAS tendancies...?). Second hand is always a bit of a punt. I have sh stuff that I bought 15 years ago and still works perfectly, but then I bought a portable mixer for the church a while ago for 'off site gigs' that worked perfectly for a couple of months and is now very unreliable and too old to be serviceable. It's often a balance between the costs/risks/benefits/good luck of sh, or the comfort of a warranty on new stuff.
  5. Beer of the Bass
    I had the drummer in the car too, we needed the passenger seat! Thankfully a cut-down cocktail kit rather than any bigger setup. And the gig was up on the moors in Cumbria during a particularly icy spell - that wasn't a fun drive...
  6. Baloney Balderdash started following Fuzz - talk to me
  7. Baloney Balderdash
    Orange Fur Coat!
  8. ezbass
    Good to know.
  9. roceci started following Feedback for Cetera
  10. roceci
    Just sold a pedal to this chap. Very smooth affair start to finish. Buy/sell with confidence!
  11. ezbass
    That's a lovely sheen you have managed to achieve there, looks great.
  12. walshy started following NBD: early Fender Nate Mendel Precision
  13. walshy
    Absolutely brilliant basses. Best mass produced P Fender have released IMO. B width nut, Quarter Pounders and Ash body. Perfection on a P and they sound mighty!!!!
  14. Acebassmusic started following Body Routing
  15. Acebassmusic
    I'm in the "electronics make more of a difference than wood selection" train of thought, so I wouldnt think chambering a body is going to make a huge change to the sound. YMMV However before starting to change the body you could get a rough idea of the weight savings you would get. Work out the volume of wood to be removed multiply it by the weight of the type of ash and it will give you an idea of whether the work will be worth it. Maybe thinning the body from the back and shaving the neck if possible as well may help 🤷‍♂️ On basses I've modded in the past I've found that the hardware / electronics / pickups fitted had a bigger effect on overall weight. It was a case of saving an ounce here and there as opposed to a lot of weight in one area. Also making the body much lighter may make the neck dive. I'm interested in seeing if you go ahead with the project an how you achieve the results. Good luck 👍
  16. Old Man Riva
    Excellent! We’re no longer a club, we’re now a movement!
  17. NancyJohnson
    The hall can hold 90...it might just need to be a bit different.
  18. pantherairsoft
    I do not. If you go to the Cog custom section on the website and scroll right to the bottom, it is the very last pedal on the page! I sold it on some years ago (along with my entire pedal and bass collection) during some financial hardship, which is thankfully long behind me now. I do miss it greatly though. I plan to get another made by him one day. Tom was cool enough to do a few customs for me around that time. The fuzz he made me (Meatgrinder) is on his site as well, but he did a chorus for me as well that wasn't listed (pretty much a bass tuned DOD Ice Box) as well as a tremolo based on the Boss PN-2 with some additional craziness. They were all killer. The phaser though, sounded just like this BM-13... which is why I'm so interested in it!
  19. stewblack
    I have this model. The finish is lovely, the weight and balance are great and people always comment positively when I gig it. Buy with confidence @neepheid is a great guy and this is a lovely instrument.
  20. iamtheelvy
    Hey, it worked! *Sold*
  21. cetera started following ELO at the BBC on BBC 2 now and Trying to identify a Spector.
  22. cetera
    Is it bolt on or thru neck? If it's bolt on it's probably a Performer. If it's thru neck then it's either an NS2000/4 or possibly a Legend Classic.
  23. Richard R
    Definitely interested.
  24. paul j h
    If you are reading this than you probably know what it is, top quality, extremely well made from a well respected manufacturer. Works with batteries or supplied power cable, although, largely a DI/ headphone amp can also be used with speakers. Looking for £180 posted The Key Features are 10watt RMS amp Switchable Active/Passive input 5-band Graphic EQ Optical Limiter Hi-fi Stereo Headphone Output Low Noise Pre-amp Output World-class Studio Quality, Balanced Line Output Stereo input and volume control for your drum machine/MP3/walkman Can run on two 9-volt batteries or AC power Worldwide AC voltage compatible Dimensions: 5.35″ W x 1.75″ H x 7.3″ D Weighs only 2 lbs AC Voltage: 100 – 240 Volt / 50 – 60Hz Included with the BASS BUDDY: 6 ft AC power cord AC Adaptor Power Unit with detachable AC cord Mini Jack -1/4 Headphone adaptor Stereo Mini Jack – Stereo RCA Stereo Mini Jack Cable Lint Free polishing cloth Padded, Carrying Case
      • 1
      • Like
  25. paul j h
    Bought on this forum earlier in the year but not really using it, as I have another project planned. See my other for sale ads for more PJB items etc. great condition very small mark on the front edge, barely visible. £360 plus postage Great Condition with Cover Model Bass Cub / BG-100 Power Output 100 Watt (RMS) Speaker2 ｘ 5″ PJB Neo Power Type A EQ3-Band EQ (Treble, Mid, Bass) x 2 Channel input 2 Input (Phone/MIC, Phone) 2-Channel separate Preamp, (Ch1 : mic/hi/low select SW, Level, Treble, Middle, Bass),(Ch2 : mute/hi/low select SW, Level, Treble, Middle, Bass), AUX In (Level) Output Headphone Out, Tuner Out, Line Out, XLR Balanced Out w/Grnd Lift Other Master Volume x1, Input Gain Volume x2, Limiter On/Off Level (Optional carry bag available) Power 100/240V AC Dimension (W x D x H)12 x 10.8 x 7.8 inch / 306 x 275 x 197 mm Weight 13.2 lbs / 6Kg Colour Black
      • 1
      • Like
  26. paul j h
    Phil Jones Bass Bighead headphone amp, quality components, great condition. HA 1 the original and best version ModelHA-1 Power Output200mW (100mW+100mW) ControlsMaster Volume, Input Gain, Treble/Bass for Instrument Input, digital signal Interface PowerInternal lithium-ion Rechargeable Battery or USB Power Dimension2.5 x 5.3 x 1”/ 65 x 135 x 25 mm 　 (WxDxH) Weight0.5lbs / 240 g Dimension2.5 x 5.3 x 1”/ 65 x 135 x 25 mm 　 (WxDxH)
  27. cetera
    Tbh, I think the powers that be are getting him to save all his energy for Sunday at Hyde Park.....so last night was pulled to get him as much chance as possible of being ready. Sunday, of course, being the last ever live show...
  28. neepheid started following TC Electronic BC208 cab and BQ250 head
  29. neepheid
    BH250 user here - I enjoy having my little beastie very much. I use it as my backup at gigs, at rehearsals, for practice at home where it especially excels - so convenient with 3.5mm jacks for line in and headphones, built in tuner, and Toneprint (worth it for the Spectracomp alone). And a blessed mute switch! That one for sale in the marketplace may be scuffed, but the price is commensurate with the condition IMO. I'd have bought it in a heartbeat if I didn't already own one! I can't speak for previous owners, but the current owner/seller is a tip top chap who I know personally and vouch for, if that helps.
  30. Burns-bass
    Can also put the bass in upside down (so the neck is in the footwell of the car). Can get one in a mini this way:
  31. matski started following 5 string P basses
  32. matski
    I was looking for a 5 string P bass for a project band a couple of years ago and ended up with a Yamaha BB425x instead. It does the P & PJ bass thing very well and is very playable. And it was ridiculously cheap - around £300 second hand! Thoroughly recommended.
  33. Pow_22
    Lovely sounding Ashdown spyder with its 2 x 12AX7 valve pre amp. Case is a bit tatty but nothing major and amp is fully functional and working. Can be tested and played here in sunny Bolton. **Postage in UK may now be an option ay buyers cost as i have some packing material to hand**
      • 3
      • Like
  34. Sparky Mark
    My Mark II version has the impedance selection switch too.
  1. Load more activity
×
×
  • Create New...