Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

difference recording drums with 4 mics or more


fiatcoupe432
 Share

Recommended Posts

Hi guys we are about to start record one album and we are trying to do most of the work ourself. Before we recorded using as many mics possible but we were never really happy with the drums sound . i love the sounds of the drums on the album below , anyoneknows how (roughly ) were recorded?
https://youtu.be/vUihMON-sD0

Link to comment
Share on other sites

[url="https://www.thoughtco.com/drum-recording-the-glyn-johns-method-1817865"]https://www.thoughtc...-method-1817865[/url]

I don't know how Elbow recorded theirs, but the so-called "Glyn Johns Method" is usually a good starting point - especially as Elbow's drummer doesn't take extended rambles through a Neil Peart-esque jungle of toms, from what I've heard!

The article above explains Paul's very important point about getting the overheads in phase (and how to do it), but also nods to discreet's equally important point about having a drummer who knows his/her stuff!

Edited by EliasMooseblaster
Link to comment
Share on other sites

Glynn Johns technique all the way.

You’ll need a good sounding kit and a good room too. I like to measure the distance between the overheads and pop a condenser mic that distance away from the centre of the snare level with the top of the bass drum - you’ll get more kick and Tom that way.

Link to comment
Share on other sites

It's all about the room, if you're not close-micing (yes, I know; the room is still there, but much less so...). The kit in a corner, or in the room centre, or in the hallway... All will contribute to the final effect. Tuning the kit should go without saying, whatever the technique used. It's well worth experimenting with mic placing, moving 'em around a bit, as even a few centimetres can make a very noticeable difference in the captured sound. Some techs will listen through headphones whilst holding the mic in different positions; good ears are required for that, though, which I lack. :blush: You'll need to spend (invest..?) a bit of time to get optimum results, time not always available when renting studio space, but well worth it.

Edited by Dad3353
Link to comment
Share on other sites

[quote name='Dad3353' timestamp='1509622691' post='3400346'] You'll need to spend (invest..?) a bit of time to get optimum results, time not always available when renting studio space, but well worth it.[/quote]

This is pretty much what I was about to say, and it's more from knowing how not to do it than how to. Even if everyone's getting bored, you need to make sure that you've got the raw stuff sounding decent on the way in, and don't be tempted to think you can sort it out later.

Link to comment
Share on other sites

[quote name='adamg67' timestamp='1509644618' post='3400586']
...make sure that you've got the raw stuff sounding decent on the way in, and don't be tempted to think you can sort it out later.
[/quote]

How true. A little time spent getting it right in the room is worth hours and days of 'fixing it in the mix' - and it'll still sound crap. :)

Link to comment
Share on other sites

Subject of many books - but with 4 mics, I'd do

1 +2 - small diaphragm condensors on overheads, measure and check they have the same distance to the snare; play around with angles to get optimal kit and cymbals coverage. this takes care of most of the drum sound

3 - close mic the kick; dont worry about phase too much - but experiment inside / outside the skin. more 60/70s sound outside the shell, tighter more modern sound inside it. suggest a dynamic for this one, ideally one that can handle the loud SPL

4 - mono room mic, ideally large diaphgram condensor (ideally set to omnidirectional pickup) - set somewhere 3-7 metres away; depending the room. get the cohesive sound of a kit in a room this way.


mics 3 and 4 can be time aligned by mixer later, as needed. crucially you must have the two overheads in phase with the snare reaching them at the same time!


if you have more mics, I'd do snare, toms, hi-hat / ride in that order... but more mics aren't necessarily better (as sounds like you discovered).

may sound obvious - but you do want new skins, properly tuned drums and a decent sounding room (I prefer bright-sounding rooms with wooden floors) - and try moving the kit within the room to find the best place possible. as noted above!

good luck!

Edited by roman_sub
Link to comment
Share on other sites

The fewer mics you use the more important the room and the basic sound of the kit become.

1. Make sure the sound of the kit is exactly what you want. Tune the drums properly, damp as required and make sure that there aren't any unwanted rattles and other noises (squeaky bass drum pedals etc) being produced.

2. Spend plenty of time experimenting with the best position in the room for the kit. You also want to experiment with acoustic treatment around the drum kit.

3. Only after you are completely happy that you've got a great sounding kit in the best place in the room to produce the drum sounds that you want, should you start to play with mic positioning.

Link to comment
Share on other sites

I don't like using the Glyn Johns method. I've tried it several times and haven't liked the results. For anything with intricate parts or a dense mix it's useless.

I tend to double mic the snare and sometimes the kick, then one mic each Tom and hi hat, 2 overheads and possibly a room mic for character. That's what works best for my studio. Generally 10 channels.

If you're near SE London, I'm happy to record you.

Link to comment
Share on other sites

[quote name='Wolverinebass' timestamp='1509730962' post='3401291']...
I tend to double mic the snare and sometimes the kick, then one mic each Tom and hi hat, 2 overheads and possibly a room mic for character. That's what works best for my studio. Generally 10 channels...
[/quote]

From the original post...

[quote name='fiatcoupe432' timestamp='1509614176' post='3400238']
Hi guys we are about to start record one album and we are trying to do most of the work o...Before, we recorded using as many mics possible but we were never really happy with the drums sound...
[/quote]

Just sayin'.

Having listened again to the track referenced in the OP, I'd say the drummer's using brushes; that makes an enormous difference to the snare (and the rest, but mostly the snare...). I don't think that that drum track was done using close micing (certainly not close micing alone...); it should be perfectly possible to get that 'feel' with four mics, as detailed in posts above.
Just my tuppence-worth.

Link to comment
Share on other sites

[quote name='Dad3353' timestamp='1509732070' post='3401308']


From the original post...



Just sayin'.

Having listened again to the track referenced in the OP, I'd say the drummer's using brushes; that makes an enormous difference to the snare (and the rest, but mostly the snare...). I don't think that that drum track was done using close micing (certainly not close micing alone...); it should be perfectly possible to get that 'feel' with four mics, as detailed in posts above.
Just my tuppence-worth.
[/quote]

True. That's what I get for reading too quickly!

4 mics can be done, but of course the room, tuning of drums and placement of mics is key as has been said.

Link to comment
Share on other sites

  • 3 weeks later...

Why don´t people just go to a studio with a seriously good engineer, good mics and rooms? Everybody thinks he can DIY what others learn in decades of a professional life as recording engineer. I don´t get that.

You don´t repair the brakes of your car by looking at youtube videos, do you?

Link to comment
Share on other sites

19 minutes ago, jensenmann said:

Why don´t people just go to a studio with a seriously good engineer, good mics and rooms? Everybody thinks he can DIY what others learn in decades of a professional life as recording engineer. I don´t get that.

You don´t repair the brakes of your car by looking at youtube videos, do you?

Anything is possible watching YouTube.

:D

 

 

Edited by lowdown
Link to comment
Share on other sites

1 hour ago, jensenmann said:

Why don´t people just go to a studio with a seriously good engineer, good mics and rooms? Everybody thinks he can DIY what others learn in decades of a professional life as recording engineer. I don´t get that.

You don´t repair the brakes of your car by looking at youtube videos, do you?

Lots of reason ! If you have budget behind then thats fine i would go to a studio and redo what i have done in the past ! I have equipment accumulated over the years of playing and i have lots of spare time to learn and practice .also depend what do you want to achieve ! On radio 6 atm are playing this guy angelo de augustine ( not my cup of tea) who recorded his album in the bathroom of his house with a 1970 s track recorder .

What i mean is : if your songs are not good no matter how much money you spend they will still be shit at the end ! So why spend thousand when with help of genorous people can achive a good sound recording ? 

 

  • Thanks 1
Link to comment
Share on other sites

15 hours ago, jensenmann said:

Why don´t people just go to a studio with a seriously good engineer, good mics and rooms? Everybody thinks he can DIY what others learn in decades of a professional life as recording engineer. I don´t get that.

You don´t repair the brakes of your car by looking at youtube videos, do you?

It's also worth remembering that those 'professionals' are probably only in that position of knowledge by DIY'ing for decades lol

Si

Link to comment
Share on other sites

On 11/19/2017 at 21:44, jensenmann said:

Why don´t people just go to a studio with a seriously good engineer, good mics and rooms? Everybody thinks he can DIY what others learn in decades of a professional life as recording engineer. I don´t get that.

You don´t repair the brakes of your car by looking at youtube videos, do you?

From my own experience very much this.

I've posted that link in another thread the OP started so he doesn't need to read it again, but for those who haven't seen it before it's little cautionary tale of home recording.

That's not to say the OP can't do it all himself, but he really needs to stop asking questions here and just get on and start experimenting with recording. The great advantage with having your own space and recording equipment, is that you're not constantly watching the clock and worrying that your time/money is going to run out before you get the results you are after. But you really need to be in the "studio" every day working on refining your recording skills and techniques.

Link to comment
Share on other sites

We found that individually micing drums is essential, as if one mic is carrying both say a rack tom and a cymbal, in order to get the tom loud enough the cymbal then can dominate, and there`s nowt that can be done about it. Whereas if each were miced, up one, down the other, sorted.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...