All Activity

Keep it under £130 and you wont get tagged

And taking it to the bridge 😜

Me too bro, and I’ve got your fretless thread to thank 😊

Carwash -Rose Royce

Time for an updated family photo shoot All present and correct minus my 75 Musicmaster which is on the workbench

I was looking at these the other day to use as monitors while recording. As there are 4 members in the band I'm wondering, can you use 4 receivers with a single transmitter, or would I have to use a splitter on the output of the PA to put both transmitters into a single audio source?

Yeah, I've always hated the goofySBMM tuners. Not sure why they've done that.

I just use the cheap Behringer ones I bought on recommendation from here

There are many members in this club, including me.🙄

so... many... times!

Something that saves me doing the same thing is remembering that the pins point in the direction that the signal goes.

Or buy a You Rock YRG1000 for a lot less. Or an Artiphon Instrument One.

A year later... how are you finding it? In particular battery life. I bought mine in February this year. It's died on me twice on stage, flashing red (low battery). The thing is I keep the transmitter and receiver in their charger box. The box still has power (2 bars) a week after I last used the wireless, so I expected them to be fully charged when I picked them tonight. They lasted just over two hours. I always carry cables as well, but I'm starting to lose trust on these. If they clearly lose performance, I'm tempted to open the things and see if I can replace their batteries. Seems fiddly.

Cleaning Windows - Van Morrison

I picked up a DAddario mic mute last week out of interest and used it for the first time last night. It seemed to work well and was easy to set up. Phantom power to my BV mic and a quick tweak of the proximity sensor wheel and my mic automatically muted when I moved back so my head was more than about 9 inches away on direct line of sight, or if I moved off axis to the mic. I suppose you could probably achieve similar by setting a gate but this seemed a good and not hugely expensive option at between £80 & £90 on most sites. I did go slightly boss eyed watching the sensor light go on and off 🤪 Sound guy seemed to like it and said he’d watched my channel mute/unmute on its own so maybe we need to invest in a couple more for the other BV mics. It wouldn’t work with a radio mic or entirely as intended for a vocalist holding the mic and moving

Go on then, I'll play. Two of the 100 NAMM Stingray Specials with Status Graphite necks.

Not a bad night at this evening’s gig. Reasonable crowd. Sound was good. IEM’s set nicely and the ambient mic I put under the kit between hi hat and bass drum worked well for all the cues I needed. Bass was sounding great and everything seemed to be going smoothly until midway through the second set one of our guitarists felt unwell and left the stage to sit outside for fresh air, though he was still not 100% when we finished so vocalist who had travelled with him drove him home. I used the DAddario mic mute I picked up last week and it seemed to work well, though I do go a little boss eyed watching the infrared light go on and off. I had the proximity set quickly and as well as moving back out of range it was easy to move just off axis and for it to cut the mic. Sound guy said it worked well and was watching how it muted my mic when not in use. May have to invest in a couple more for the other two BV mics 🙂

Pleased I could help. If I had a pound for every time I plugged the feed to the pa into the expression pedal socket on the hx stomp, or for every time I had to move the singer's wiring between sub and top from 'full range' to 'high pass' then I could have afforded dummy plugs sooner.

I would literally check everything again as if you were doing a fresh set up. Level the neck(no relief) then run a fret rocker up the frets again. Check the frets in 3 places across each fret. Level any cheeky rockers! Set the neck relief again Check the nut slot heights. Set the string heights and make sure they follow the fretboard radius. I bet you still have a high fret at the bottom of the neck.