All Activity

Very nice bass. You don't see many for sale, and a great story. BTW, you'd be advised to follow the forum recommendation about proof of ownership at the top of the thread.

👍

Would likely take an interesting swap for this. I was hoping to use the money towards a short scale ACG, but also in the market for a Jazz, preferably a Flea signature in pink if there's any going round. Send me a PM, always up for a chat!

MM mutes never used £25 including UK postage.

Badass 3 bridge never been used. £90 including UK postage

I recently purchased this from a small solo builder. Fantastic build quality and to my ears it's identical to the Darkglass I had. I had no need for a DI like the original, this doesn't have one. So it's just a killer dirt box. It was a kind of impulse purchase for me, as awesome as it is I've really no use for it sadly (I can get similar with what I already have) . I put it on my board but it's had very little use so it's as new. £93 posted. Always happy to hear trades w.h.y(possibly another vintage micro tubes)👍 I forgot to take a pic, but I've put fresh pedal tape on the bottom (I can remove if needed)

I'm going to be annoying and point out that Walk The Dinosaur was actually played by John Patitucci on his French-made Lag bass (with a fresh set of strings and loads of compression on it.) I can hear why you might think it was a Steinberger, though.

As 1 cab is on hold I thought I would list the WJBP1 preamp/DI separately. In excellent condition with original packaging and foot pedal and can be supplied in small flight case at no cost. Notes from Wayne Jones: My perfect sound was an Avalon 737 studio pre through my WJ powered cabs. So I set out to design a bass pre-amp that truly reproduced your bass sound & thus enabled you to tailor your sound. Also the tone controls had to work in the right areas & the pre had to have all the bells & whistles we need to do our job. Again no expense spared, just the highest quality components I could get for everything we need on stage & in the studio. These were my Instructions to my Engineer. I have achieved that with the WJBP This pre will also make front of house engineers happy as what goes in comes out. The WJBP is designed with a no compromise attitude in Cost, Quality, Components & Features just as are WJ High End High Powered Bass Cabinets. Features Input 1/4” phono stereo/mono jack Input Gain For both Passive & Active basses -10 Db pad Input Gain clip Indicator LEDS (top left corner) Tone controls are critically set by Wayne & are extremely accurate in the attack points of each string. You can set them by one for each string on your bass All +15Db -20 Db Incredible separation between the tone controls There is also a 30 Hz boost for those that may like it ( not really needed at all as the Bass control gives such a great bottom end with ultimate attack). In/out button for selection Compressor: Optical, automatically senses & is very effective even with a very small amount engaged. In/out button for selection Balance: This is a balance control for stereo operation e.g. 2 WJ 2x10 or Stereo WJ 1x10 Powered cabs. Master volume Controls output Pre-Amp Output Indicator LEDS (top right corner) tell you if you are overloading the WJBP output Mute - Puts the WJBP in standby mode. LED Indicates when in use. The Mute mode should also be used for power up of the WJ Powered cabs, otherwise a very loud 1000watts will sound when WJ Powered cab (or separate power amp) is turned on. It also operates the built in Tuner. For standard tuning for 4, 5 & 6 string basses Foot switch mutes all output for silent tuning. Master Outs 2 balanced XLR (recommended) outs for connection to WJ powered cabinets or to separate power amps Balance control on from panel will affect these outputs. Also a choice of 2 Unbalanced 1/4" outputs for same function. (not recommended as output is lower) All master outs can be used together as a pair or Individually with balance control set to the respective output FX Send & Return - Stereo or mono Foot switch - Mutes all output DI Output - Balanced XLR out with Level control & ore or post EQ button Aux Input - Stereo input, both 6.3mm & 1/4” phono. You an use this to plug items such as iPad, iPhone backing tracks etc. to play along with. Headphone With Volume Control - Plug in your headphones to practise with. You can use the WJBP by itself without plugging into a power amp. Rack Mount Ears - Included Specifications Input 1/4” Active Unbalanced Impedance 220K Max Level +20dBu Outputs Balanced XLR Impedance 300 Ohm Max Level +27dB 1/4” TRS Unbalanced Max Level +22dB Frequency Response 10 hZ to 20 KHZ THD+Noise@1KHz 2.5 % Signal to noise ratio >80dB Limit 2 Total Gain 62dB Universal Line Voltage 115/240 VAC, 50/60Hz Shipping size 40.5 cm x 32.5 cm x 18 cm Weight 5.9kg Rear Panel Inputs 1/4” & 3.5mm TRS Active Stereo Impedance 20K Max Level +15 dBu EQ Band frequencies: Band 1 20-300Hz, Centre set at 80Hz Band 2 60-1KHz, Centre set at 160 Hz Band 3 150-2.5KHz, Centre set at 500Hz Band 4 450-8KHz, Centre set at 1.6KHz Band 5 1KHz-20KHz Centre set at 5KHz Band 6 Centre set at 10KHz Size 6.6 cm x 30 cm x 24 cm (including knobs) Weight 2.41kg