All Activity
- Past hour
-
Reggaeland is happening today and tomorrow at the National Bowl in Milton Keynes. The headliners are Chronixx today and Capleton tomorrow. My targets today are Proteje, Iration Steppas and Mad Professor and tomorrow I am hoping to see Steel Pulse, Everton Blender, Aba Shanti-I and finally Israel Vibration & Roots Radics. One love!
-
Bassman68 started following Compressor needed for music school in South Africa (donation)
-
Hi Julian I’ve got a few pedals knocking about (Behringer) Limiter/enhancer,Chorus & a BDI if they’re of any use? Steve
-
rawcane joined the community
-
Looks like the site links are all redirecting to gear 4 music. They are the other good ones so that's something
-
-
silverfoxnik started following Feedback for Gareth Hughes
-
Hi Folks, I've just had the pleasure of buying a Carl Martin Opto Compressor from @Gareth Hughes Suffice to say, Gareth's a top Basschatter, and someone I'd happily deal with again... Fast delivery, great comms and the pedal's a winner! - it sounds great and comes with some very cool outer case mojo, which suits me down to the ground. Cheers Gareth, and here's to the next one! 👍😊 Nik
-
Trace Elliot Amp. Is this Series 1? Help!
Downunderwonder replied to basslondon's topic in Amps and Cabs
Rescued from a time capsule? My 250SMX has lead an easy life and compared to your looks like it went along with the Omaha beach landing. -
-
Fender precision bass 1971 Price 5000 euro
gregorbass replied to gregorbass's topic in Basses For Sale
-
Fender precision bass 1971 Price 5000 euro
gregorbass replied to gregorbass's topic in Basses For Sale
-
Fender precision bass 1971 Price 5000 euro
gregorbass replied to gregorbass's topic in Basses For Sale
-
A fantastic compressor with plenty of tonal variety using 3 styles of compression with their own respective ratios. The SSL Bus compressor, FET 1176 and Darkglass's own Super Symmetry. There is also a lot of great tweaking that can be done via computer with the timings of attack, release and even a HPF. In fantastic condition, including box, manuals, rubber feet etc. Specifications: Hybrid Analog/Digital Compression Pure Analog signal path Blend control 3 built in yet distinct modes of advanced modelled compression Connect to your PC/Mac via Micro-USB (B) Free ‘Darkglass Suite’ software (provides additional fine control and compression models) 10-LED gain reduction meter Touch-Through metal sensors Internal doubling of supply voltage to 18V (allows for extra headroom) I/O: 6.5mm / ¼” Jack Input impedance: 1M Ohm Output impedance: 1k Ohm (9V DC, centre -, 2.1mm, ~250mA current draw)
-
- darkglass
- compressor
-
(and 1 more)
Tagged with:
-
Just been sent this from the guitarist’s Mrs. HAD to share! 362f7dfd-4677-4d30-a584-2f38199e1aba.mov
-
fabbabass started following Comfort strap Long
-
Comfort strap Long
fabbabass replied to IanA's topic in Accessories & Other Musically Related Items For Sale
-
If you are a fan of graphite necks, check this:
https://www.basschat.co.uk/forum/124-graphite-neck-ordering/ -
For Sale: Pete Skjold Greyling 5 – Impeccable Condition, Handcrafted Luxury Up for grabs is my stunning Pete Skjold Greyling 5, in the best, near-mint condition. This exquisite instrument combines exceptional craftsmanship with versatile sound options, making it a perfect choice for serious musicians. Key Features & Highlights: Beautiful, Warm Tone: The bass offers a very pleasant playing experience with a rich, warm sound that sits perfectly in any band mix. Flexible Sound Shaping: Equipped with a 4-way pickup switch (Reverse P, Series, Parallel, or P), allowing for a wide range of tonal options. New Thomastik JF 345 Flats: Recently fitted with these high-quality strings, the bass sounds fantastic and plays buttery smooth. Comfort & Playability: 33-inch scale length with a lightweight body (only 3.85 kg) and a superb H string, making it comfortable for extended playing. Premium Construction: 4-piece body crafted from fine Mahogany Symmetrical roasted quartersawn Maple neck, a true feel-good neck Indian Rosewood fretboard Evo gold frets Controls: Volume and tone blend for easy sound shaping Finish: Special satin finish that feels great and looks elegant Extras: Comes with a very high-quality, sturdy Skjold gig bag for safe transport Price & Details: Original price: $4,400 USD (plus shipping, taxes, and fees) This beautiful instrument is offered at a very attractive price, as I am currently having a custom 5-string built. Don’t miss this opportunity to own a top-tier, handcrafted bass that combines stunning aesthetics with incredible sound and playability. Feel free to contact me for more details or to arrange a viewing!
-
Anyone got anything?
-
I'm tempted to start a thread called "How was your five gigs last night?" as we played a Shuffle in the village of Aldbourne. We did it a couple of years back and it was something of a mixed bag but the theory is six bands rotate around the village performing sets at the two pubs, two cafes and a club. The immediate downside is that I wanted to see a couple of the other acts but couldn't as we were playing. My duo expanded to a trio as our original drummer from 35yrs ago was dusted down and brought out of retirement, catapulting us back to Sixth Form 1989 / 1990! He even messaged to say his mum would cook for us before we set off. Bless her, well into her 80s and she catered for our dietary requirements! We'd driven down to Southampton to rehearse with Mike and it was a great day, in terms of sound and effortlessly cool company. We've all mellowed with age and are all much more self aware with age. This is 60% of an old Sixth Form goth band and as it is the internet, I can pretend that the three of us drove about in Mike's Lotus! First up was the Post Office cafe. I actually had my wedding reception there back in 2016 so it felt good to play. I had envisaged nobody being there but it was mobbed. It's a tall order doing 5 venues in an evening so I elected myself as chief whip cracker and we got on with our set. We opened with Joy Division's Love Will Tear Us Apart before busting in to two of our own songs. We ended on The Cure's Just Like Heaven and a darker take of The Weeknd's Blinding Light. I could hear the nerves in Mike, and more surprisingly Nick. Plus I had a couple of people pointing at me and pointing up. That said, the video I saw on FB (set to friends only) sounded better than it felt. One bloke complimented on our original songs and said he couldn't believe how intelligent the lyrics were. I said "that's all on Nick, he's bright - he has O level Woodwork!" We deliberately had a two mandocello and a snare drum (dampened by a tea towel) set up, with two small Boss three pedal pedalboards to allow for easy travel between venues. We moved on to The Crown. Last time was a very frosty reception (a couple of rungs down from needing chicken wire!) and we'd not been back. This time we were totally on it and so were the crowd! It was mobbed and we went down well again. We had to stop the audience from chatting as we tried to leave as we didn't want to hold up proceedings but it as all very complimentary. We moved to what had been our second home, The Blue Boar. The owners are moving on and you can tell they are giving up. The PA suddenly looked tired and there were no leads and just one mic. The previous act was more mainstream and we walked in feeling like we'd be following the returning hero. A few people immediately left as she finished and I thought it might be a comedown. However, it started to fill with different people as we started and we did a fair set. This was the one set, I played less than my normal high standards. I'll say it was the worst show of the night but on balance I was happy with it. One thing I will say was it was a really interesting reminder of how much pedal settings need to vary between venues. My overdrive was screaming out at The Boar but barely audible on the same settings back at the Post Office. Funny how the room and the PA can make such a difference. *obviously, I adjusted accordingly! Anyhow, we arrived at The Forge, which was the second outdoor gig. I am yet to source a pic for this (I'm sure you'll all live!) but for me this was my favourite show. I thought we'd hit our stride here. With the exception of the Boar, all had on hand soundmen (basically local musicians who helped us set up). A great set. Finally, we finished at The Club. We did an extra song of Rain by The Cult, which we'd first played together in the very same village 35yrs ago. I noticed Mike's drumming was just slightly dipping here but he'd done so well on balance. Honourable mention to the two old school Swindon goths who came out and followed us around all five venues! Sorry for such a long post but it really was an amazing experience and an amazing night. We ended by returning to the Crown and hanging out with all the acts.
- Today
-
Warwick GPS Corvette 6 - Bubinga with black hardware
tvickey replied to tvickey's topic in Basses For Sale
-
Close your eyes when adjusting EQ. Forces you to only use your ears.
-
Sorry but that is the wrong set of plans, there are plans for the Beta 10 and Beta 10B on the Eminence web site so if you want to assume that your speaker is one of those then that's the way to go. I did think of pointing you in that direction but you'd still be guessing as to which of the two speakers you might have or if Ashdown specified any changes other than the colour of the cone. What I suggest you do is build the cab but make the baffle/front panel removable. As you say this is a project and if the baffle is screwed but not glued then you can make changes to the cab more easily as you experiment. So the simple answer would be to build the BC110 30litre cab which is tuned fairly close to the original Ashdown cab. One 30l cab is much the same as any other and the only advantage of the BC110 is that it was designed to be easy to build and that makes is a good basis for building and experimenting within a project. in this case it's almost finished so no point in changing tack now. It'll work and do the job you have planned for it. You can then modify it if you think it has shortcomings you can fix. As an engineer you probably can glimpse the theory behind the design and probably want to start to get to grips with it. I'm sure we'd all enjoy discussing that with you but that'sa whole other thread
-
Hellzero started following Pick up height too low
-
I'm using this neoprene foam instead of the very very very expensive short lengths sold by Fender, Thomann and the likes. https://www.amazon.co.uk/Longx150mm-Widex20mm-Insulation-Vibration-Furniture/dp/B09KTSNQY1/ You'll have enough for the rest of your life and you can reduce their thickness very easily with a simple cutter and create made to measure durable pickup height foam.
-
No surprises there. The original was very expensive for the time and I'm sure inflation will take its toll. At the moment home practice is taken up with band stuff but if I get a bit of time I might make up a practice board and put a beat buddy on it, with maybe just a tuner and looper.
-
-
I don't know why this wasn't clear enough.