gary mac

I'm in Herts.

An oldish set of rounds👍

Still got the Spanish acoustic that my parents bought for me in 69. It's still got the original strings on😂

What a great outcome

I would also recommend treating yourself to a solder remover tool. Just a few quid on EBay and money very well spent.

No bass acrobatics, just a little riff repeated over the different settings. IMG_2173.MOV

A pic of the switch in place.

With a little bit of time on my hands at the weekend, I decided to install John's tone switch in my custom P bass. I put this bass together a couple of years back and had been regularly gigging with it, prior to the lock down. This bass has the Fender 62 original pick ups installed and a standard P bass wiring loom that I put together, with CTS pots, switchcraft socket and vintage style, cloth covered cable. The installation was straight forward, I was able to leave the strings on, so it was just a case of removing the pick guard screws and maneuvering the guard out. I chose to unsolder the existing wires to make the necessary connections but they could have just been snipped. Then the original tone pot along with its capacitor was lifted out and the new tone pot switch put in place. The wires were inserted in to the relevant connectors and the screws tightened. Once the guard was back in place, all that remained was to put my original flat top knob on and the job was complete. I've had a couple of days to experiment and play about with the settings, and must say that I'm pleased with this little device. The eye opener for me is the second/B setting, which is the bypass, straight through option. I just loved the aggressive, clanky tone and I know it will work well for me in the band. Moving on to the .047uf (C) gives a much warmer, mellow and very useable, P bass tone. The difference between the .047uf cap and the .1uf (D) is more subtle than when moving from B to C, very useable though and lovely for deep dubby sounding bass. All in all a great little device and a worthwhile upgrade. It'll be staying in my P bass, just hope I get to try it out at a gig at some point. I'm never sure about the value of sound clips but I will post a video clip in a while. If you're listening on decent speakers or through head phones you should get to hear what it does.

Be warned , the next user to start a thread about this ebayer will getting a warning added to their account.

My swamp ash P bass.

@KiOgon is a good choice. No experience with Ironstone but I have installed the Entwistle Neo Jazz pickups for a couple of my customers and they loved them.

Like Stew says, they are decent instruments. I've just been doing some work on one for a customer. The hardware was all good, as were the pick ups. I did some fret work, smoothing the ends and a little levelling. Also upgraded the pots. It played, looked and sounded great.

Many of my BC sales over the years, have been to Europe. It doesn't worry me anymore than posting around the U.K. Like others have said, pack well, use a hardcase and get proper insurance cover.

Sold a guitar on Reverb a few weeks back. It was all painless and unlike Ebay , no tyre kicking numpties to deal with.

Was about to say the same

My fave Sweet number

Happy to start a feedback thread for @jAzzOvic and to recommend him.. Good comms throughout and a pleasure to deal with.

I just love the drum break on the track, Road Angel from What Were Once Vices. Always give it a blast at a decent volume.

The Doobies sounded pretty fine with two

What a scary time for you and yours. Good to hear that you're making a good recovery

Not tried milliput but have used super glue/baking soda plenty of times. 👍

I've replaced an awful lot of these switches in customer's Gibsons. They should be good but they're just not.

I would advise you not to cut the G or D strings, use the full length.