All Activity

Fender Mustang PJ MIM A feeler and please remove if it’s in the wrong section or if spares/repairs isn’t acceptable. I’m selling this as a spares project although it is functional albeit not pretty. I bought it earlier this year. It looked water damaged and an absolute mess. I bought it for the body and hardware and pickup parts, the plan being to strip it and buy a new neck for it. The neck had a lot of lacquer cracks and splits around the trussrod veneer at the back and headstock fascia. It needed some rewiring and a new tone pot and all the hardware cleaning with a wire brush. The finish was lifting in lots of places but there were no obvious cracks in the body - I thought about stripping it and finishing it with Tru-oil but haven’t got round to it. When it arrived I thought it wasn’t as bad as I had expected so I cleaned it up. Did the work on the pots,etc. the pickups were fine. I watched a video of rescuing a neck in similar condition and had a bash using epoxy resin. So I tried that and clamped it for a few days and gave it a light sanding to make it feel smooth under the hand. I’m no luthier, I just did it for as an experiment for fun. To my surprise the neck was okay to play and the trussrod worked and adjusted as it ought to. I have actually rehearsed and gigged with it as a spare for my old Fender Musicmaster. The headstock fascia and back has lots of hairline splits in it that I filled with titebond and clamped. They’ve been fine but again I wouldn’t really trust it as a main gigging bass. I must emphasise it’s probably best described as a Fender Mustang body (genuinely Roadworn bass) with a free neck. It’s a fun beater as is or you could put some more work into it to make it into a nice project. You could put another neck on it (I had bought a Bronco neck that unfortunately didn’t materialise thanks to a dodgy courier). The parts are all pretty decent after cleaning. It weighs around 3.7kgs. Here are pics, I can post more if there is interest. The last pictures are when I got it. God knows what had happened to the poor thing! No trades I can post in the UK.

Pm sent

Hi folks, more stuff from the spares draw. These are very lightweight tuners and the one that Low End Lobster has been fitting to his Sire basses as a drop in replacement. This set is of four tuning machines is brand new and unopened. £100 inc. P&P to UK mainland Here are a couple of pics and the link to Lobster's YouTube vid on the subject.

Very Glen Campbell

Having played through a Monaco I can imagine this is quite the beast of a cab, even with the “lower rated” driver. I’m half tempted myself, but the cat would need to be included 😆

Hey guys, So, this is the older version of the combo, before the 700RBII. I’ve had it for over a year, after about 6 months the power board shorted out after not pressing in the power button fully. I took it to Taunton Audio Visual Services who managed to get it up and running again. About another 6 months later the same issue has happened again. I’ve since bought a replacement head and have been using the 210 exclusively via a speakon adapter and the cab works perfectly fine and sounds great. When the head was working it sounded even better! I’m offering this up as a repair for someone with the know how or knows someone who can help, and just as a good and solid 2x10 cabinet which can be used with any head with the adapter. The overall condition of the combo is pretty good for its age. The handle and wheels all work perfectly fine and there is no major cosmetic damage. This is a collection only from Bridgwater, Somerset. I can also meet up or deliver within a certain distance as well. Thanks, Josh.

Another Basschat bargain!