All Activity

yeah fretless 2EQ stingray with Pau F fingerboard is lovely

Load it into Irfanview, shrink it using Resize to a reasonable size for viewing, then save as a new file.

For both the MS-60B and the later MS-60B+ (actually in my case the MS-70CDR+) I built a little pedal that allows me to scroll up and down through patches. It's not the cleanest bit of construction but it works. Needs a 9V supply the way I've done it, but with a bigger box it could have a 9V battery inside (or four rechargeable AAs, 5V will do) and an on/off switch.

Shit makes great compost for new stuff to grow, hang in there buddy!

Use the fx send to another DI.

But rarely in the charts.

There are plenty of exceptions.

Yes lucky it’s not a bunch of guitarists. They’d be throwing shit at each other and trying to do “the adding thing”

Brave post @lee650, all the best mate, life throws some shit around and I'm sorry to hear it's hit you, but at the very least you've got a bunch of bassists onside should you need them 👍

if you install the MS-50G firmware on your ms60b, you can load all the bass effects and run an extra couple of effects Though a HX stomp or GT1000 core will be a easier to use solution

I have one of these but it's missing a screw & spring. Where can I find a replacement? Google hasn't been much use.

It's because you're listening to thw wrong modern music 👍 I have a playlist call 'Great basslines' that are tracks that I hear on the radio, usually tracks that I'd not heard before, and usually by artists that surprise me, e.g., Olivia Rodrigo, Harry Styles, Billy Eilish etc. There is some great bass playing out there 👍

Technical information from the Fender site for the Rumble 100 states (my bold...) ... ADDENDUM / TECHNICAL NOTE Due to ongoing supply issues, some units may be built with an alternate power supply and amplifier module. This will not change the audio performance of the product; however, these units require a 4-ohm speaker rather than the original 8-ohm specification. Should replacement of a speaker ever be required, qualified service personnel should note the impedance rating (8 ohms or 4 ohms) indicated on the speaker itself and use a replacement with the same impedance rating. Additionally, units built with the alternate power module include the added pre/post switch that lets the user set the XLR output to provide pre- (direct) or post-preamp/EQ signal. It would depend, then, on the exact model of your amp whether it has this feature or not.

A very belated +1 for Dylan covers. Peter, Paul and Mary's covers of Blowin' In The Wind and The Times They Are A-Changing are sublime. Not forgetting Janis' cover of Piece Of My Heart.

I have a great Fender Rumble 100 amp. However, the d.i. signal vanishes when you turn down the amplifier volume. I need the signal to remain for the mixing desk even when I turn my amp down. In this case the p.a. monitors and IEM's give me the sound I need. Do you know of any amps that will do this? I've tried asking the manufacturers but not sure the front-line staff will understand the issue.

Laney Digbeth, with just the FET channel. Lovely sounding thing.