All Activity

I'm On Fire! - Bruce Springsteen

Bought the Mike Campbell memoir from Mick - our very own Basschat legend. Thanks Mick

Lucky you. I was told by him this year that in-person visits are not possible even though I've been there twice in the past. I live in North London not far from the premises. I don't want to be told that twice so the store is no longer on my radar,which is a shame.

We didn't start the fire - Billy Joel

Hi Neko, looks like at least the concept exists! I will keep searching for something more plug and play

Looks good. My panels needed to fit in a certain orientation as well. I appear to have made the back panel flush so if I put any foam behind it, the panel would stick out so am contemplating what to do. I could route a 1.5mm ish recess around the back panel so I could put foam in. Not sure on foam stripes, wadding or cross brace. Advice seems varied on whether it will help. I suspect we both have the same offcuts so the cross braces seem easy to do though. Suspect the weather won't be good here so might be Saturday before I do anything else. Let's see how yours goes. Rob

I replaced the elephant tuners on my Belgrado with lollipops. Big improvement, if you ask me. There are more tuners on the way for my De Gier bass.

Any link available?

Speaker paint ordered from Penn Elcomm, I should have some Blue Aran rollers knocking around as well as black spray paint.

That Carvin B4 at £450 is a steal, shame about the thumb rest mods though and the bridge is also a cheap replacement. It will probably have originally had a nice Hipshot B style which looks much better: https://fenderfever.com/products/1?_pos=63&_fid=cdb17b57b&_ss=c

I bought a bass from him recently, no issues at all, I found his prices totally reasonable and it was an easy transaction. I went over to his shop, tiny place full of cool / odd / rare Fenders, lots of MIJ stuff that you don’t see often in the UK.

I'd be waiting for the next set of Ultralites to appear in the Marketplace. Guyker do some alternatives at various price points and hole diameters. A couple here: https://www.aliexpress.com/item/1005010061436369.html https://www.aliexpress.com/item/1005008360034080.html

That's OK. I'd found the Penn Elconn website but the page I found had massive quantities for massive prices. That's a lot more like it, I'll get some black ordered. In order to escape Antiques Roadshow, I did more cab building. Previously I'd got the battens on the side panels so now it was just a case of sticking the side panels onto the bottom, then putting on the top. Then see how well the front and rear panels fit. I tried the rear panel first. It didn't fit in one way up, so I reversed it and it popped straight in. Slight gap but the rear panel is destined to be fixed in place so there will be some filler going in there. Then the front panel - I think I'll be doing as Phil suggests and screwing this in place with 3mm thick neoprene adhesive strip 10mm wide round the joint. The fit was nice and snug. Having done that, I went round the top and bottom panels putting the cross battens in place. To do: cut hole for speaker, fix rear panel, make and fit cross brace, put wadding in, round over edges, fit front panel, paint, add corners, add handle, wire connectors, install speaker.

Trip to Edinburgh with the 9 piece band SHOUT! Played at STRAMASH. Great venue packed with mainly young lads and lassies! It's a student area so no surprise. Stage was ok. There is 9 of us as mentioned so it can get a bit tight at times. I managed to clout one of the singers in the back of the head....but no damage to the bass which was a Godin Classic Shifter. Nice to have some free beer and water as well! Back there in January and looking forward to it! SHOUT! Rescue Me.mp4

Good to hear! Which ones do you have?