Jump to content
Why become a member? ×

Post your pedal board - Basschat style!!


dudewheresmybass

Recommended Posts

17 hours ago, Teebs said:

Gig rig. 

Picsart_24-03-25_10-08-20-205.thumb.jpg.941e13724ab7caf5d5d438ef32f03095.jpg

I’ve got all those pedals apart from the tuner! My DI is a Fender branded one that must be made in the same factory as it’s pretty much identical.

  • Like 1
Link to comment
Share on other sites

It's finished, again. Still not totally happy with the envelope filter, but it's the best small one I've found. I'd like a noise gate, but there's no room...

board.jpeg

Edited by EmmettC
  • Like 9
Link to comment
Share on other sites

6 minutes ago, EmmettC said:

It's finished, again. Still not totally happy with the envelope filter, but it's the best small one I've found. I'd like a noise gate, but there's no room...

board.jpeg

No it’s not - you’ve not updated the note on the switcher!! 

  • Haha 1
Link to comment
Share on other sites

2 hours ago, EmmettC said:

It's finished, again. Still not totally happy with the envelope filter, but it's the best small one I've found. I'd like a noise gate, but there's no room...

board.jpeg

Load up some spectrum envelope patches onto the C4. There are some excellent ones.

  • Like 2
Link to comment
Share on other sites

On 24/03/2024 at 23:56, Chadu25 said:

New 12x8’’ board from Bastow Pedalboards. Very nice sturdy build with good clearance underneath. Running the stomp on the CAPO’s post loop. Doom2 and Octabvre are in the Stomp’s FX loop. My tone toys from clean, gritty and synthy stuff :D
IMG_1037.thumb.jpeg.1effcf46b368b1246307a90caed4d3c9.jpeg

 

IMG_1018.jpeg

IMG_1047.jpeg

IMG_1043.jpeg


Love this board, very cool setup!

 

Si

  • Like 2
Link to comment
Share on other sites

On 27/03/2024 at 18:53, dan-horro said:

Hello everyone, this is my pedalboard, I'm still experimenting with KMA.
 

Put that Microtubes to the HP link, and tweak the frequency. I like the 400 Hz area.

  • Like 1
Link to comment
Share on other sites

2 minutes ago, itu said:

Put that Microtubes to the HP link, and tweak the frequency. I like the 400 Hz area.

That's the way it is, just not sure the frequency, thanks for input mate.

  • Like 1
Link to comment
Share on other sites

Live action shot from Easter morning church service - Bass pedals on left, acoustic guitar on right, which would have been great if I hadn't accidentally plugged the acoustic into the bass pedals at one point when switching instruments - although did notice before playing anything thankfully!

 

IMG_20240331_092332595_HDR.jpg.e0ea5db5800fa3eeebffac1f5211821e.jpg

 

  • Like 7
Link to comment
Share on other sites

2 hours ago, SimonK said:

Live action shot from Easter morning church service - Bass pedals on left, acoustic guitar on right, which would have been great if I hadn't accidentally plugged the acoustic into the bass pedals at one point when switching instruments - although did notice before playing anything thankfully!

 

IMG_20240331_092332595_HDR.jpg.e0ea5db5800fa3eeebffac1f5211821e.jpg

 

You need different couloirs guitar and bass leads to keep you right 😀

Link to comment
Share on other sites

Gigged my now condensed board last night having removed some individual pedals and brought in the B2 Four. I still need to do some work on my patches, but it worked pretty well! The drive sounds on the B2 are ace! 😎👌

PXL_20240330_202306593.MP.jpg

  • Like 5
Link to comment
Share on other sites

Finally rebuilt the board in a way I’m happy with (for now). It’s used for both bass and guitar so I had to think about pedals that sound great for either. 

 

IMG_1420.thumb.jpeg.73f536dd34831abfa8a1c6fea73f5763.jpeg

  • Like 10
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...