All Activity

I get Jon Shuker to do any work like that on my basses - I'm sure that he compares very well with the Bass Gallery, as will several other of the top guys around the country.

Hi again, sorry for the delay, that pesky little work thing sometimes gets in the way of being a speaker geek... 😒 I'd disagree with Bill about the resistors, assuming I'm right in reading that you want to pair that tweeter with a one x 10" box, right? On that basis, it's likely that the tweeter will be too bright on its own without some attenuation. As I alluded to before, if you can transfer over the associated wiring & switch in their original configuration, that gives you the option of using the switch to match the response a bit - obviously, assuming you were happy with the voicing that Ashdown used in the first place. By that, I mean you might find the high setting gives a good balance when using both 10s together and the low setting might better balance the sound with just a single 10. To that end, I'd try and work out what the switch was doing - it could be as simple as selecting which of 2 different value resistors is in series with the driver, giving different levels of attenuation for example. Re the ME15-2008, it's certainly worth a try if you get the satisfaction out of working on a project, the TSP's Bill found suggest that it might (depending on your taste) be OK with the original port, or might be better with the port sealed entirely. Here's the predicted response in 95l tuned to 50Hz (green), and the same volume sealed (blue): (I've used 95l to account for the volume of the backside of the driver and any other inclusions such as bracing etc - it'll only be making a few tenths of a dB difference though.) The vented box doesn't have a whole lot more low bass than the sealed, confirming that this box size is smaller than ideal if really deep bass were the goal. It's also got a bit of a baked in tone of it's own, due to that 3dB hump in the upper bass. That might or might not suit your ideas of good tone, it's entirely up to you. The sealed box will be a little lighter on bass overall, but may sound a tiny bit more neutral due to missing the hump. Neither one looks catastrophically bad in terms of "typical" bass cab low frequency responses though. Note that the cab mostly only affects the response in the bottom 2-3 octaves, as I've shown in the graph above - most of the rest of the character of a given driver is independent of the cab. I guess if I were you I'd go ahead and make up a new baffle to fit the driver and simply try it as-is, bearing in mind that if you want to try the sealed option that's as simple (for a quick & dirty test at least) as stuffing a teatowel or 2 in the ports to block them off. Cheers, D.

Enjoyed that one Rob. Nice wee song. Dave

I'm usually 10-12 hr day with the Glam band and we only play a max of 2.5hrs these days. Dave

Thanks for that one, I’ve got a bit of a drive now so will check that out

The one on the core is very cool, you can set parameters like Pattern via assigns to oscillate through options etc to give a cool glitch effect

I decided if I was going to buy a piece of synth gear that was going to gather dust I'ld pay £50 more and pick up a Microkorg 2 or similar (I've no idea if it's any good, not spent any time on synthchat finding out)

Purchased a Gramma Pad from Len. Dropped it off, lovely bloke, great condition item, very fair price - can’t ask for more!

Purchased a Subdecay Prometheus from Jonnybass. Great comms, super helpful! Thanks.

I think it really helps that he comes from a different background. Same as Josh &co of JHS show - they make content as a side show of their online bass lessons company/pedal company so don't rely on clickbait to survive - like if he wanted to do a hour long video about some really dull bass related thing with no commercial side to it- say making a mute out of a bit of foam you could buy in Lidl, he could and it would appear just as genuine as if he was pitching some product he's involved in.

Shhh 🤫 don’t type that out loud or @rwillett will hear

Fake your own death? If they're all sound then I'm sure they'll understand if you just have an (reasonably) honest chat with them, but I'd lean more towards it being an issue with you rather than saying 'you lot are going nowhere, I'm off'. It sounds like gigs aren't on the cards? So you're under no obligation to play x amount of upcoming shows and sticking around for too long but, I'd offer to stick at it for a month or 2 until they find a replacement just to keep it civil.

Nashville gigs are very poorly paid in general. Even tours with well known artists might only pay $200 per show (with all expenses covered obviously). Small fish in a big pond comes to mind!

I like your thinking - lets get some

Yeah the time I left a band through "not feeling it" was more due to the drive to their rehearsal rooms. In summer it was 45 mins through country lanes, a very nice drive in fact, but I knew once it was winter I`d get the hump with it in the rain and the dark with no lighting, so better to walk now. They understood, I stayed on til they got a replacement and played the first gig the band did, which was a great laugh.

When my gear was flightcased, all the cases were blue. Everything else was black and so my gear was instantly identifiable. Even now, all my covers have a blue border.

I haven't had those but I am one for buying synth pedals and not using them, so this would be right up my street

I love that!

Hi, does anyone know what the two small hex sockets in the pickup tube actually do? Thanks.

and on the ME90B

Don't worry guys, Mrs. Scrumpy has got the cake requirement covered - and then there's the crumble 🙂

Praise indeed, thanks very much, not sure I`d be up to it now mind...................