All Activity

And I've still got a bit between my teeth.

True. There were the My Lidl Pony range.

I bought some, it gave me the trots.

Midi [5pin] to TRS jack Such cables do exist, and are available (other suppliers can be found) https://www.amazon.co.uk/kenable-3-5mm-Stereo-Audio-Cable-Black/dp/B00KQUZQ4O/ref=asc_df_B00KQUZQ4O?mcid=9505f24b5e163411afc0646faf38461b&tag=googshopuk-21&linkCode=df0&hvadid=710760400267&hvpos=&hvnetw=g&hvrand=4222002176326608353&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9044980&hvtargid=pla-392235580309&hvocijid=4222002176326608353-B00KQUZQ4O-&hvexpln=0&gad_source=1&th=1 This thread https://www.basschat.co.uk/topic/521143-midi-pedal-board/#comment-5602414 has @BigRedX telling me that "MIDI leads despite using 5-Pin DIN connectors only use 3 of the conductors - the centre pin for earth and the two pins immediately either side of that for the data signal. The other two pins are unused."

All Day and all of the Night - Kinks

So they tune down half and octave? Frustrated bass players?

I thought I should elaborate. At 300 watt, with two Fane 225s, in theory you will be close to 120dB plus the low end 6dB boost @phil described earlier. It will also be louder than one theoretical 4 ohm drive running at 225 watts. The reason is that running a 225 watt speaker at full power will incur power compression. This causes a +3dB loss* in power due to the rise in resistance of the voicecoil. So 225 watts into a 225 watt speaker will give roughly the same acoustic output as the same speaker powered at 112 watts**. *Based on data previously published by Beyma. Beyma used to be the only company to include power compression graphs, but clearly it was seen as a commercial disadvantage and they no longer do it. **There will be some power compression even at 1/2 rated power, probably 1-1.5dB.

I'm afraid not. The Ubertar was provided by the customer. I don't think I would have chosen the Ubertar myself. The sliding pole-piece pickup the 13 Ghost (Thorsten Behrens) made seems much nicer to me. https://www.notreble.com/buzz/2024/12/30/bass-of-the-week-meet-the-anachronist-13-ghosts-handmade-marvel-from-germany/

Day-O (The Banana Boat Song) - Harry Belafonte

An update, and a correction. I called Leicester Crown Court (0116 222 5700) and quoted the usual reference (33JJ0821825) and answered the usual questions, and was given the date of the trial. "It's the week commencing 8th February 2027" - not 2026. I am not sure where 2026 came from - apologies.

I think it ended in the best way. Pick up and carry on, no more time wasted on histrionics. My motto band wise has always been ‘if it ain’t fun, why do it?’.

I don't think anyone has ever used Satan's claw for doom metal so there's your solution. No one is going to tune down half an octave and then put on a capo

My experience too. . . . wish I'd thought of that saying!!

Sorry it's taken so long to come back. I'm having to juggle major birthdays, holidays, exams and work to find a day that;s best for everybody. I'm targetting Saturday April 25th all day. That seems to meet everyone’s requirements. I've provisionally booked it for that day and am awaiting confirmation. Thanks Rob

Bass brethren, I have ventured, probably very foolishly into midi madness. My question is, has anyone here made their own [or have any knowledge of] Midi [5pin] to TRS jack to link a DMC micro to a Meris Enzo? Any known pinout weirdness/issues or is it "standard" issue?

Fantastic work as usual, Rob! I also don't understand this kind of electronics in an instrument, but the customer is king... Once again, congratulations for this masterpiece! Do you have a link to the Ubertar pickup(s) used as all I could find is this: https://www.ubertar.com/hexaphonic/

Bloody Capos or "Satan's Claw" I have a hard enough time working out what the guitar player is doing without them cheating. My heart sinks when they whip out a "well what fickin key are we in now" clamp.

I had to double-check if this was an older thread and if I had already replied to it, and lo and behold: I did, in july 2024. Maybe somewhat to my surprise (as it can change quite often for me) the above is still accurate I did grow more and more curious about fanned-fret basses, and would love a combination of fanned frets and headless at some point (an Ibanez EHB1005L is on my "to try-list"), but deep down I'm sure I'd prefer something more traditional.

.

What time would you kike volunteer setter-uppers to be there, Richard?

Yeah I can't fathom what use all the options could have. I much prefer a simple bass myself. And I would love to build something like this again: Four strings and no controls!