Jump to content
Why become a member? ×

All Activity

This stream auto-updates

  1. Past hour
  2. Bilbo
    Another request, this is the complete Bruno Aguilar performance on the tune 'Dos Navegantes' from the 1994 Edu Lobo album 'Corrupião'. Nice thing and not too difficult. https://bilbosbassbites.co.uk/dos-navegantes-edu-lobo/
  3. JapanAxe
    Blank looks:
  4. Grainger guitars
    Great photo 🤟
  5. Jonesy started following The classic Rickenbaker clank
  6. Jonesy
    I got fairly clanky with........ Roto swing stainless steels Sansamp BDDI (though I imagine any tubey pre will do) Both pups max Tone fully open And then playing with fingers and quite a low action, but just over the fretboard and quite aggressively (ala John Entwistle) so I can whack the strings off the board. I don't know what the HW bridges are like, but I have a few mm of the dreaded Ric tail lift nowadays. I can't be sure, but I put that down to the Roto's. I had them on it for 15+ years though and it's nothing that impacts playing.
  7. Mediocre Polymath started following Fretless bass survey
  8. Mediocre Polymath
    I started playing bass when I was 15. I got my first fretless when I was about 20, I think – pulled an 80s Yamaha from a literal heap of battered old instruments in a pawnbroker in Plymouth. I've always had a fretless and a fretted bass since then. I played fretless almost exclusively for a few years in my early/mid 20s, then set it aside for quite a long time because I couldn't get on with the instrument I had (a Warwick Corvette), but wasn't able to admit to myself that the new fretless I'd paid so much money for wasn't my thing. I made my own fretless bass about four years ago and have been playing that probably 60-70 percent of the time since. As an answer to a potential follow-up question – I prefer a lined fingerboard.
  9. Silky999
    Thank you. The most time consuming bit was the hand sanded oil finish on the body as it needed to dry between coats. I think I put about 10-15 coats on and I could get maybe 2 coats a day as well as monitoring for bleed back from the wood. I suspect there is a total of at least 10 hours actual work just in the body finish. I haven’t nitro or poly clear coated this one and just went with wax instead similar to a Warwick finish. Although it’s less tough, it is much easier to deal with any scratches, knocks or dinks in the long run as you just raise or sand the boo boo and then oil and wax. There is also a pleasure in a bit of periodic waxing.
  10. Mickeyboro started following Changing faces, changing styles
  11. Mickeyboro
    Many of you kindly contributed to my recent thread about motivating dep musicians. This is related, but a wee bit different. We have just done our first ever gig with a female singer - our fifth front person in three years, the others all blokes. We gave her maybe 65 per cent of the songs to sing: I did the rest. It went down well on the night. (Caveat: she has her own band and has not committed to us for any specific period.) Just had a call from the promoter of our next gig to advise me that he and a number of people there were not taken by the new female-fronted line-up. When pressed, he admitted he’d liked our ‘blokey’ image better. (Including a singer who could barely hold a tune compared to our new one!) My wife tactfully suggests we are now sounding ‘more commercial’, but will that win us enough new fans to make up for the stick in-the muds? Have any of you had to overcome resistance to change?
  12. Beedster
    👍
  13. MacDaddy
  14. MJJS started following Oil Finished Ash Jazz Bass -£300
  15. MJJS
    Looks great. How many hours did that take?
  16. kevin_lindsay
    Thanks matey
  17. sambecker1 started following Anaconda PJ Essence 5 for sale £850 with Gig Bag in Brown Burst very nice indeed
  18. Carl_D
    Monkey Man - Rolling Stones
  19. BassmanPaul
    Just as a comment: I am surprised how many people don't understand a bass with more than four strings. To me it just gives me more choices in finger positions. I did have three six string basses but on learning that my nephew plays bass, he's at Oxford, I sent him my newest six. He loves it. I now have just my original fretted six in white and my natural Koa wood fretless. I found that the standard J size pickups installed on the bass were a bit weak on the outer two strings so I replaced them all with EMG soap bars. That solved the problem. When I ordered the fretless that vast expanse of Ebony called a fingerboard scared me a bit so I had fret lines installed. The whole instrument is a dream to play!
  20. Today
  21. Russ started following Fretless bass survey
  22. Russ
    Meet Scarlett - my Maruszczyk Frog 6-string fretless: She sounds as good as she looks... if you go to the BC Bands thread, there's a live video of my band in there, and I play it on a couple of the tunes. You can see a bit of her sister, Skye, next to her there - same, but fretted and with a blue colour scheme. I was the first person to specify a Frog with the ceruse-stained quilted ash, Delano Xtenders and coloured hardware. Based on what I've seen on their FB page, Adrian & co have made quite a few other ones since - I need to have a word and get him to call a Frog with that combination of features the Frog RW or something. Make it a signature bass.
  23. rainbowreality
    I can throw in the official Line 6 PSU too
  24. simonlittle
    I never had a Traveler 102P. Before this setup I mainly used a CMD121P combo plus a NY112 extension cab. I much prefer the sound of the single 102 Energy cab to the old rig; feels a bit more open and round. The combo with the extension cab was plenty loud but could sometimes feel a bit oppressive at higher volumes. Plus the CMD121P had that annoying Markbass piezo horn hiss that you can’t unhear. No idea whether the MB102P cab has that issue (you’d hope not), but I went for the Energy one just in case and couldn’t be happier with it. The MB58R cabs are all very deep (front to back deep) so they do take up more room if space is a problem. They definitely don’t sound honky though.
  25. Woody1957
    Great pickups, l have some on my Mexican Vintage 1957 precision!
  26. Stealth
    Whereabouts in Warwickshire ?
  27. Champion Badger started following Markbass Traveller 151p - 1 x 15inch - 400watt cab - 8ohm
  28. Champion Badger
    Markbass Travellor 1 x 15, 400 watt, 8ohm cab. In great condition. Hardly gigged. £250.00 Collection only or can meet within reasonable distance.
  29. roceci started following Various pedals and related for sale - Source Audio/Zoom/Morningstar
  30. roceci
    Impulse buying and in some cases, lack of time to spend learning new tech forces sale. All items for colleciton in central Cardiff or add £7 a pop for UK postage. Source Audio Atlas Compressor - £180. Amazing piece of kit that does way, way more than my brain can cope with. Cops any compressor style you like and can run as two fully independent compressors. Boxed, like new apart from velcro to base. Source Audio C4 Synth - £170. Mindbendingly feature-packed, again way over my head. No box, like new with velcro to base. 2x Source Audio SA168 midi adapters - £45 each. These allow the above pedals to accept midi control from non-Neuro Hub devices - unlock all presets and change parameters on the fly, use expression pedals etc. Morningstar MC3 - £160. Fully programmable midi control for your midi pedals and expression pedal. Boxed, minimal marks to powder coating, velcro to base otherwise like new. Works great as a set up with the above kit. Zoom MS-60B - £50. Boxed, like new, velcro to base. Roland EV-5 - £30. Boxed, never used, like new. Sonicake Vexpress - £20. Works great with HX Stomp etc, expression on a budget. Boxed, like new with velcro to base. Harley Benton Dyna Compressor - £10. Budget little compressor that works surpsingly well on bass. Velcro to bass. Lechnical RPB-1BK pedal board - £20. Great budget board with space inside for power and neat internal cable run system. 50 x 25 x 6 cm. Never used.
  31. MartinB started following Thumb rests
  32. MartinB
    You could probably get someone to 3D-print you something similar for a lot less e.g. https://www.thingiverse.com/thing:4876428 https://www.thingiverse.com/thing:4184813
  33. ezbass
    Likewise. I was just thinking that the pitch at Wembley took a hammering that year, what with Live Aid and Springsteen.
  34. jezzaboy
    Plus shipping. I bought one for a Ray and it was £60! Nice bit of kit though.
  35. NancyJohnson
    Interestingly, in the last few months it became apparent that it was actually cheaper to buy in a Chinese neck for my Aria than to fork out for a refret, so that's what I did. It's got a '70s style Fender Jazz Bass logo on it; do I care? Nope, in truth, not really. Everyone who needs to know its provenance knows what it is and if I sell it, the buyer will know as well (and they'll get the original neck, too).
  36. Champion Badger started following G&L L2000 USA for sale
  37. Champion Badger
    G&L L2000 USA in tobacco burst. Bought from new in 2018 from PMT. In good condition with minor surface scratches in the center of the back. Also a small ding on the side of the bass - see picture. Low action and has great sustain and resonance from quality woods and the locking bridge. Around 4kg in weight. Case, certificate and spec sheet included. £1000 plus shipping to be arranged by buyer, or can meet within a reasonable distance.
  1. Load more activity
×
×
  • Create New...