All Activity
- Past hour
-
Mismatched top, would this bother you? Cort space 4
41Hz replied to 41Hz's topic in General Discussion
Yeah, I’m not too happy. They want insured and tracked return which DPD are quoting me £54.73 for! -
RAY AGAINST THE MACHINE started following Mismatched top, would this bother you? Cort space 4
-
Mismatched top, would this bother you? Cort space 4
RAY AGAINST THE MACHINE replied to 41Hz's topic in General Discussion
That is Bs! The bass has come from a bad batch of poor quality control ! First thing I would do if it were me , is to condemn them on trustpilot , farce book , X etc .You could also point them to this topic here ! If you are still in the timeframe , then you have your consumer rights . You’ve done me a favour by mentioning Guitar Guitar , who will be avoided by me in the future . On a slight tangent ; I did post a topic about cort space 5 a couple of weeks ago ,regarding the fluctuating prices. I’ve since seen that the price for the green one has gone down to £679 .However I had a look at the picture and it seems ‘off’ . What I mean by that is it looks like these basses are being churned out by the shed load without much due care and attention imho ..similar to yours ! It’s put me off of wanting one now . If I do go for a 5 string , I’ll choose a completely different brand of headless . -
madshadows started following Mismatched top, would this bother you? Cort space 4
-
Mismatched top, would this bother you? Cort space 4
madshadows replied to 41Hz's topic in General Discussion
Send it back if you aren't happy with it, if you do want the same model ask the shop to take photos of the other basses in stock of that kind and see if any are any better John 😎 -
MARKBASS MB58R CMD 121 P 300W 1X12 BASS COMBO very light only 14.3kg As new! Only used for one gig no longer needed. Amazing lightweight bass combo based in Brighton Sussex Spec from Andertons TheMB58R CMD 121 P features 1x12" Markbass classic ceramic speaker and a new piezo tweeter. The P series is created for those who like classic speakers but don’t want to carry heavy stuff, thanks to the revolutionary material AND TECHNOLOGY used for the cabinet enclosure, the MB58R CMD 121P weighsonly 31.6 lbs / 14.3 kg! SPEAKER: 1×12” Markbass classic ceramic TWEETER: new piezo tweeter SPEAKER POWER HANDLING: 300W RMS (AES Standard) REFLEX: Rear IMPEDANCE: 8 ohms CROSSOVER FREQUENCY: 3.5 kHz FREQUENCY RESPONSE: 45Hz to 18KHz SENSITIVITY DB SPL: 99dB CONTROLS: GAIN | 4-BAND EQ | VLE – VPF FILTERS MASTER VOLUME | LINE OUT level control PRE/POST EQ e GND switches OUTPUT POWER: 300W RMS @ 4 ohm, 150W RMS @ 8 ohm DIMENSIONS: 17.72”/ 45cm (w); 22.68”/ 57.6cm (h); 18.64”/ 47.1cm (d) WEIGHT: 31.6 lbs / 14.3 kg
-
Lozz196 started following Bass neck weights...
-
Good advice there
-
I just used various grades of sandpaper on a cork block, plus the paper held in my fingers to get the roll off more rounded. A bit hit and miss TBH but I’ve seen my local luthier do it that way. Of course, he has infinitely more skill than I do but I wasn’t too disappointed with the result.
-
Thanks for that, it makes a lot of sense. What did you use to round over the fret board?
-
Sorry for all the quotes, just getting caught up on one of my favorite threads. Downsizing from multiple pedals to a multi is definitely a 'thing'. Much easier now as well as they are all fantastic, you could honestly gig with nearly all of them. Although I'm sure in 10 years time they will all sound terrible again! I still have a little analogue board with 3 pedals on a nano, but my QC (and before that my HX stomp) is just my rig now. What else could you need? He says, looking at the limited edition Sansamp paradriver... Pleased to see I'm not the only one, although it still feels like cheating. Just for three songs in our set, what about you? That is slick. Have you seen the little cable ones? They put a bit less strain on the jack socket IMO.
-
I find I become familiar with what I listen to, or what people tell me. For example I now know a lot about Mark King... 😁
-
Piers_Williamson started following 1977 Music Man Stingray - with OHS
-
-
Some big names there in the bass world, shocked...
-
Double post.
-
You have demonstrated perfectly my point thank you - I have never heard/seen of these.
-
Leonard Smalls started following Video/Audio sync issue - sampling rates?
-
Video/Audio sync issue - sampling rates?
Leonard Smalls replied to EliasMooseblaster's topic in Recording
I suspect it may be something to do with the frame rate; as BigRed says, 28.7 is a very non-standard rate. Can you set the recording video frame rate to be 25fps? And have you tried putting the audio and video together in Audacity? IIRC there's a video option... -
Yamaha YGD Pickups: £50 Selling this YGD pickups from my Yamaha BB434. Works fine, moving on as I upgraded to EMGs. Comes with stock pots, jack and knobs. cream cover 4s PJ set: £5 P-style bass pickup covers. Outer measurements - 57mm x 28mm x 14.5mm depth. Length with tags 72mm, screw holes 65mm apart cream cover 4s JJ set: £5 NECK COVER Outer measurements - 92mm x 19mm x 19mm deep. Outer poles are 68mm apart BRIDGE COVER Outer measurements - 95mm x 19mm x 19mm deep. Outer poles are 70mm apart Free postage
- Today
-
Mismatched top, would this bother you? Cort space 4
41Hz replied to 41Hz's topic in General Discussion
Have sent the pics to guitarguitar and they are saying there is nothing wrong with it so won’t pay the return shipment cost, disappointing but a lesson learnt. -
Do you have an Elf? My brother's sounds fine through a Portaflex 15.
-
Gallien Krueger Legacy 800 210 Combo.
pippinpage replied to jay-syncro's topic in Amps and Cabs For Sale
-
-
You can add Tom Petty and these guys: https://www.hofner.com/blog/hofner-artists-4 And those bands plus many more, mostly unknown: https://www.hofner.com/blog/beatles-60s-2
