Hammer_ Posted September 18, 2022 Share Posted September 18, 2022 Hi. Has anyone experimented with placing their pedal board at the back of the stage and using only a tuner + expression pedal our front? I’m trying to think of ideas to keep my stage area clean as I don’t use many stomps once they are turned on. Only use expression to turn on/off overdrive so don’t need a large pedalboard out in front of me. The other idea I had was to start rack-mounting them but that seems like a whole different challenge. Any thoughts, ideas or tips? Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted September 18, 2022 Share Posted September 18, 2022 I always put my tuner & Sansamp at the foot of the cab so they’re out of the way, so I reckon what you’re looking to do will work fine. 2 Quote Link to comment Share on other sites More sharing options...
BigRedX Posted September 18, 2022 Share Posted September 18, 2022 In the 90s my band of the time used MIDI controlled backing and multi-effects for guitar and bass. All the effects patch changes were controlled by the backing, so we didn't have pedals cluttering up the stage. It also meant that I could be anywhere on stage and my sounds would change automatically at the correct points in the song. Quote Link to comment Share on other sites More sharing options...
Franticsmurf Posted September 18, 2022 Share Posted September 18, 2022 If you're not switching them on and off mid song, you could put the board (or a customised version of it) on the amp/cab or even in a purpose made stand - they remain accessible but clear of the performance area. As easy access by foot is no longer required, you can source or make a board to fit the footprint of the amp/cab/stand or if you rack them, to fit on a rack tray. I made a small stand from an old music stand to house my in-ear monitor kit. I started by using the full music stand with the lectern bit flat but it was bigger than I needed, so I used an old off-cut of MDF, covered it in black tape and bolted the lectern swivel attachment to it. It's just the right height so I can make adjustments, but the overall footprint is small and it can sit out of the way on stage (usually behind the PA speaker). 1 1 Quote Link to comment Share on other sites More sharing options...
deepbass5 Posted September 18, 2022 Share Posted September 18, 2022 Yes always kept them on pedal board below the cab, less hazards to trip over. even if that meant turning away mid number to switch on or off but that was rare. Quote Link to comment Share on other sites More sharing options...
bassbiscuits Posted September 18, 2022 Share Posted September 18, 2022 Most of the time I’m only using a compressor, tuner and either a chorus or an octaver depending on the gig. None of which need to be changed rapidly, so I often set them up on top of my amp head (especially handy for cramped stages where I’d be tripping over cables otherwise.) 1 Quote Link to comment Share on other sites More sharing options...
NancyJohnson Posted September 19, 2022 Share Posted September 19, 2022 I suppose as my signature tone is gnarly/gritty, I can just dial that in and leave the Sansamp(s) on top of the amp. This isn't to say I've never used or bothered with any other outboard kit, but live it's either been plug-in or BassPOD/Sansamp. Quote Link to comment Share on other sites More sharing options...
Paul S Posted September 19, 2022 Share Posted September 19, 2022 My set up is bass > wireless > tuner > TC Spectrodrive > desk, so very much set and forget at the back or side. Quote Link to comment Share on other sites More sharing options...
Hammer_ Posted September 19, 2022 Author Share Posted September 19, 2022 Thanks for your replies guys. I guess what I’m asking is what you keep your pedals in or on… pedal boards, racks or any other ideas? To give more context I’ve just sold my helix and am going back to pedals. I’m used to keeping my helix at the back in front of my cabs, but as stages start to get bigger I was thinking about having tone shaping gear at the back and stuff I need to use down the front. Quote Link to comment Share on other sites More sharing options...
deepbass5 Posted September 19, 2022 Share Posted September 19, 2022 I was just a couple of single pedals guy for years and Like Bassbiscuits i would have them on top of the cab and thump them with my fist. buying batteries was the thing that took me to a pedal board the smallest i could find Just four on there only used each of them about once through the gig, depending on the set I would sometimes not bother with them at all due to fear of degrading my sound. ( Comp, Oct, synth, Chor/Flange, ) Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted September 19, 2022 Share Posted September 19, 2022 I plug the bass into the amp and that's it. Headstock tuner, s'all. KISS-style (Keep It Simple, Sonny...). 1 Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted September 19, 2022 Share Posted September 19, 2022 30 minutes ago, Dad3353 said: I plug the bass into the amp and that's it. Headstock tuner, s'all. KISS-style (Keep It Simple, Sonny...). For the first time in years I adopted this approach at the gig I did on Saturday, for some reason it felt incredibly liberating. 1 1 Quote Link to comment Share on other sites More sharing options...
Rich Posted September 19, 2022 Share Posted September 19, 2022 (edited) 2 hours ago, Hammer_ said: Thanks for your replies guys. I guess what I’m asking is what you keep your pedals in or on… pedal boards, racks or any other ideas? To give more context I’ve just sold my helix and am going back to pedals. I’m used to keeping my helix at the back in front of my cabs, but as stages start to get bigger I was thinking about having tone shaping gear at the back and stuff I need to use down the front. I'd mount them on a board and, as others have said, put the board on top of your amp/cab/rack/whatever. Still accessible but not cluttering floorspace. My board lives on the floor as I still have to stamp on it during the set, but it's small enough that I can tuck it away between the feet of the cymbal stands, so I can still get to it but it's not taking up accessible stage space. Edited September 19, 2022 by Rich Quote Link to comment Share on other sites More sharing options...
Nail Soup Posted September 19, 2022 Share Posted September 19, 2022 Pedalboard is the way to go IMO, if you have more than one or two pedals. Main benefit is short set up time… it contains pedals, power supply and connections. Just plug and play. If the board is going front of stage then I recommend a rechargeable power pack. If it’s mainly ‘always on’ then yes, put them at the back of the stage. 2 Quote Link to comment Share on other sites More sharing options...
Franticsmurf Posted September 19, 2022 Share Posted September 19, 2022 I built my own boards from a strip of plastic fascia board. Solid but light weight and you can trim it to the size you need (I have three single strips of various lengths). I covered them in black tape so they don't stand out on stage. Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted September 19, 2022 Share Posted September 19, 2022 On the odd occasion when not using my amp rack I use a tuner and / or a comp pedal I sit them on my amp in the punk band. In the Glam band I use a sound effects pedal but I prefer that at front of stage as I need to switch on / off thru some songs. If you decide to go rack mount then consider the weight of your rack. Amp plus pedals, tuner and power supply all add up to quite a weight. My rack with amp and korg tuner is 24kg. Quote Link to comment Share on other sites More sharing options...
joeystrange Posted September 19, 2022 Share Posted September 19, 2022 (edited) I have all my pedals (wireless, tuner, Big Muff, SansAmp) on a board in front of my cab and have done for years. Mostly so I (or anyone else, for that matter) don’t step on them whilst I’m playing. The SansAmp is always on and the Big Muff is always on for one band and on for a few songs in their entirety for the other band so no need to switch anything mid-song. I don’t talk into the mic while I’m tuning either so I can do that at the back too. Edited September 19, 2022 by joeystrange Quote Link to comment Share on other sites More sharing options...
paul_5 Posted September 19, 2022 Share Posted September 19, 2022 One of the (few) benefits of having to gig sat down is that my board is right in front of me, and I act as a sort of warning cone for my 'trip hazard'. Quote Link to comment Share on other sites More sharing options...
Rich Posted September 19, 2022 Share Posted September 19, 2022 10 minutes ago, paul_5 said: I act as a sort of warning cone for my 'trip hazard'. “Step on my Muff one more time,” bellowed Paul at his clumsy frontman, “I double dare you.” 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.