Jump to content
Why become a member? ×

All Activity

This stream auto-updates

  1. Past hour
  2. Lukas2025
    Lukas2025 joined the community
  3. briansbrew started following Kiogin Jazz loom with plate
  4. krispn
    It’s a beauty!!
  5. Lukas2025
    My SVT-II non pro is from 1991 and I have the December 1994 Ampeg update with various update information. The amp makes a loud pop when engaging the EQ on the pre-amp (in and out) and I cannot find the reason. In the 1994 update the pre-amp schematic is 07S519-02. My pc-board says 06A519 01 and the SLM drawing in the 1994 update is an 07-519-01 dated 8-23-88. The 02 schematic is quite different from the 01 pc-board which becomes obvious when checking the pcb tracks. Now my questions: Has anyone an ...-01 schematic and has anyone an idea where the pop comes from and how to fix it? Thanks Jurgen
  6. Dad3353
  7. Beer of the Bass
    Yep, I'm still quite content with my PF50T. We have a guitarist using a Fender Blues Junior and also two vocal mics, trombone and flute onstage, so we're never pushing stage volume that much that it's a limitation. It's even done a couple of small halls without PA reinforcement, through my two 1x12 cabs. It did take me a little while getting my approach to the EQ figured out again when I changed from flats to rounds a while back, but that's a me problem.
  8. neepheid
    Aw man, I just cleaned out my slush on my car's MOT and the bridge. Rotten timing!
  9. fretmeister
    Alas, too much for me. One day I'll find a really light one. Probably 10 mins before my car bursts into flames knowing my luck.
  10. gjones
    The seller for my neck no longer has any for sale. I suspect they may be made by a Fender/Squier manufacturer in China and one or two of them disappear out the back door. But these look like the exact same ones https://www.ebay.co.uk/sch/i.html?item=177280017838&rt=nc&_trksid=p4429486.m3561.l170197&_ssn=ningbohante20231205
  11. lemmywinks
    There's a few sets of 1/2" Ultralites (USA and Lic) for sale on here at the moment.
  12. Len_derby
    White coat syndrome. I had to look that up. It seems a fairly natural response to knowing one’s efforts are being recorded for posterity.
  13. newbassista
    I made this pdf i don't know if you can show it properly, What do you think of the notes for the song? Gloria a deus nas alturas.pdf
  14. fretmeister
    When I was doing the educational music trust thing kids would get promoted up into the next difficulty ensemble and many would be very nervous. Sometimes it was quite a jump even when there was a 4th part for their instrument. Always told them to start just playing the root on beat 1 of each bar. Do that for 2 or 3 rehearsals. Then play whatever the right note was for beat 2 and so on Building their confidence until they filled the gaps. Didn't matter if it took a couple of weeks or even a term. They were counting right and adding in the notes as they got confident. They got to feel like they were joining in properly even if they were only playing 1 note in a bar. Funny how quick progress is when they are having fun and not feeling like they are making mistakes.
  15. Harlequin74
    Apologies its sold but i didnt change the header!
  16. Reggaebass
    Yeah definitely, they are great, the only time I’d get rid of mine is if a B15 heritage came along
  17. walshy
    I reckon you'll love it mate
  18. Supernaut
    What can I say? Shocked but knew the end was near. An absolute legend and that term is indeed necessary for Ozzy. Playing Sabbath LOUD today. RIP.
  19. Today
  20. Quatschmacher
    Now £475.
  21. neepheid
    Currently debating which tuning machines to use. I do not like or rate press fit bushings, I think they're stupid and I will not fit them to a bass where I have a choice. But it's 17mm holes, and I know the majority of tuners with screw in bushings are mini sized, like 14-15mm tuner holes. Don't want to fill and redrill the holes, so what's out there for 16-17mm headstock holes? Hipshot (Licenced) Ultralite 1/2" Schaller BM Light Grover Titan Schaller M4S Gotoh GB528 All of these are rather expensive (currently leaning towards the Schaller BM Light) - do none of the "good, but cheaper" type suppliers (Wilkinson and the likes) do a full size tuner with screw fit bushings?
  22. zbd1960
    'ok, I suffer from "white coat syndrome" when it comes to making recordings of me playing anything... I started organ lessons September last year. Here's a rather splashy recording with assorted errors using my Hauptwerk organ using the Hereford Cathedral sample set... https://drive.google.com/file/d/1LomcMKJeDjRNR1i1UzkGShtLJsqOCKrL/view?usp=sharing https://drive.google.com/file/d/1R-DqKlYMf_UOcd2jfmYxpgxsIujQgguP/view?usp=sharing
  23. miles'tone
    Yes, 1.5" at the nut is Jazz size. It's very comfy to play 👍🏼
  24. Derek B started following Boss Katana 210 Bass combo - *SOLD*
  25. Derek B
    I am interested in the amp, i am based in Central Scotland. Can this item be shipped, thanks
  26. xgsjx started following Ozzy died.
  27. xgsjx
    Great musician, singer & frontman. But a total bellend of a person who supported apartheid.
  28. Derek B
    Derek B joined the community
  29. manudepaz started following MARUSZCZYK ELWOOD ABSOLUTION 6a-24 FRETLESS MINT
  30. manudepaz
    For sale absolutely mint condition MARUSZCZYK ELWOOD ABSOLUTION 6a-24 FRETLESS, never left the house. For sale for £1900 / 2200€ Specs: - Model: Elwood Absolution 6a-24 fretless, Right handed, 34” long scale - 6 strings flatwound - Body wood: Alder with birds eye maple - Neck wood: Hard rock maple, graphite rods - Fingerboard wood: Ebony, 24 frets, 54mm black nut, 18” radius - Markers: Small dots on 3,5,7,9 etc fingerboard side - Binding: Black on body and headstock - Hardware colour: black - Machines, bridge: Hipshot ultralite, standard 16mm spacing, ETS knobs - Headstock: 4+2, matching headstock, black logo - Pickup: Aguilar AG DCB-D4 bridge position - Electronics: Aguilar OBP 3 (4 pots without mounting plate, mid freq switch) - Colour: natural - Finish: Matte all - Straplocks: Dunlop flush month - MARUSZCZYK bag
      • 1
      • Like
  31. Bassman Rich
    I haven't lemon oilled it for a while, and the photo is only a phone photo, so all those things could affect the colour, although just checking against a Gibson ES135 and Fender Jap Jazzmaster, it is slightly lighter than the fingerboards those two
  32. jd56hawk
    Nothing intrinsically wrong with Fender basses, but why would I buy one when I can buy one of these instead?
  33. mikegrovesmusic
    Hi, I’m selling my Strymon Zuma Pedal Power Supply. £180 includes postage within the UK Includes an IEC lead, 7 of the original power cables (right angle to straight) and a handful of voodoo labs power cables (right angle to right angle) Specs: 9 high-current, fully isolated outputs. 9 outputs offer 9V DC option. 500mA per 9V DC output powers nearly any pedal. 2 selectable outputs offer 9V, 12V, or 18V DC options. 12V option provides 375mA, 18V provides 250mA. 24V OUT jack allows connection to additional outputs via Strymon Ojai (sold separately). One slight little chip to the paint on the top (photo below) and there’s a bit of sticker residue on the bottom left over from previous Velcro. Thanks, Mike
  1. Load more activity
×
×
  • Create New...