Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Finished! A Very Special Save


Andyjr1515

Recommended Posts

So that's all the excitement over :lol:  

Now it's a case of stripping it all back to the wood and starting the full finish.  As it won't look tangibly different to the mockup on the previous page for a few days I won't do a 'watching paint dry' step by step.  Instead I'll just summarise once it's looking even and satiny. :)

 

  • Like 2
Link to comment
Share on other sites

2 hours ago, durhamboy said:

If I can't spot a joint line I always go for the end grain. Might be wrong, but it looks like a joint line about half way from the center line to the lower edge. In other words 3/4 of the way down.

If i'm right sorry for being a spoil sport.😉

Well played, sir! :hi:

  • Like 1
Link to comment
Share on other sites

2 hours ago, ezbass said:

Mmm, bring on the glossy finish.

No gloss on this one - we're going for the slurry and buff satin :)

 And yes, you can do slurry and buff with stained wood - but there is a very specific sequence you have to do which I'll cover when I do the reveal next week ;) 

  • Like 3
Link to comment
Share on other sites

6 minutes ago, Andyjr1515 said:

No gloss on this one - we're going for the slurry and buff satin :)

 And yes, you can do slurry and buff with stained wood - but there is a very specific sequence you have to do which I'll cover when I do the reveal next week ;) 

Well, a subtle sheen then. Bring it on.

  • Like 1
Link to comment
Share on other sites

Thank's for the cheesy grin Andy.

It's really just a case of my OCD showing, that I bothered to look closely enough at pictures you'd posted to pick up the joint line. Incredibly neat joint by the way, the same standard and attention to detail you show in every part of your builds. When it comes to bodies I make with clear/transparent finishes, I can't live with joints where the wood grain is clearly mismatched. (More so on the front than the back..) 

Looking forward to seeing this build/save progress to the finish.

  • Like 1
Link to comment
Share on other sites

38 minutes ago, durhamboy said:

Incredibly neat joint by the way, the same standard and attention to detail you show in every part of your builds

I'd like to take credit, but this was how the blank was delivered to me ;) One of the best suppliers in the UK :)

Link to comment
Share on other sites

Most of the reveal coat of stain and tru-oil is off.  One last job before the final hand sand and 'watching paint dry' stage is the string-through ferrule recesses. 

For this I use my Proxxon drill press for accuracy (it is small but it has very little runout - spindle wobble - that affects many drill presses) and then the old channel-tunnel trick of drilling from both sides and meeting in the middle to ensure that the entry holes and exit holes are individually lined up visually, but also actually meet in the middle to allow you to get the string through ;).  

sRBFdubl.jpg

The holes at the back are recessed to ensure that the tops of the ferrules are flush with the back.  With ferrules, it's best not to 'try them and see if they fit' before you are ready to fit them permanently ;)

w0S6XoPl.jpg

 

  • Like 2
Link to comment
Share on other sites

1 hour ago, Rich said:

Do you rely on a good interference-fit to keep the ferrules in place, or do you glue them in?

Ideally (if I get my drill holes the right size ;) ), just an interference fit.  You only really need them not to drop out when you are changing strings...

Link to comment
Share on other sites

And to the final finish stage of the body - the tru-oil slurry and buff.

"But hang on" I hear you say, "it's stained!  You can't slurry and buff stained wood.  It'll sand all the stain off!!"

Well, that was the conventional wisdom - pretty much up to me looking at my LP Junior that I'd stained in cherry red and thought...hmmm...what if...??

And yes you can.  But - like all these things - there are a couple of tips and tricks.

And so where we had got to was this - actually bad photo because, other than at the edges, you can't really see the gloss starting to build up.  But this, with the wood having now drunk in the oil into the grain, each extra coat of tru-oil starts bringing out a gloss finish:

AACNhNTl.jpg

To illustrate, based on the number of coats I put on  @Jus Lukin 's  headless, just one more coat would give me this level of gloss:

GI49tnGl.jpg

But that is not the finish that @Fishman is after.  He is after more the 'old bass well looked after' look.  And for that look, slurry and buff on stained wood is ideal :)

The method is simple:

- proceed in the usual way with the initial coats of Tru-oil.  Just wiped or brushed on, allowing it to dry in between coats.  First few will be sucked into the end grain.

- at the point that each extra coat is starting to leave a gloss finish and the end grain is no longer absorbing more oil, stop.

- leave it for 2-3 days minimum to harden

- I then slurry and buff a coat.  But - unlike normal where the slurry is tru-oil mixed with the wood dust - this time the slurry is the new tru-oil mixed with the hardened tru-oil surface sandings.  I use either 1500+ wet and dry or 2500+ Micro-mesh

-  The original hardened tru-oil coat is actually quite tough and it is not likely, with the above grit, that you will break through into the stained wood (if you do, you will lose the stain in that patch) but - the slurrying is a relatively light one and care is taken at any corners and edges where there is a greater danger of breakthrough.

- while it is still wet (ie pretty much immediately) I then wipe off the oil with some kitchen roll and then, with fresh roll or a lint free cloth, buff it dry.

And that is it! 

I went from @Fishman 's slightly gloss body above to this in less than 20 minutes:

mha4ew1l.jpg

s4DuVKwl.jpg

97YR3aYl.jpgNo9lyUul.jpg

H9r2kBql.jpg

And it's silky smooth to the touch.  If feels like a well-cared for 40 year-old bass...

...which is where we came in :D

 

 

 

  • Like 11
Link to comment
Share on other sites

1 minute ago, TheGreek said:

This looks very classy...good work sir.

Thanks, Mick

The first time I tried this to get an 'old look' on a full refurb was your very own Silk Bass :)

LcwgbJgl.jpg

And I still think your choice of Orange was inspirational!     

Even though, at the time, I did say "ORANGE???????????"   :lol:

 

 

  • Like 2
  • Haha 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...