Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

The Official MARUSZCZYK CLUB!


Ulas Engin

Recommended Posts

So here is a tragic story. Acquired a lovely Elwood from this site about a year ago. Action has never been right. Mid to upper positions appreciably higher than first position. I hate that. Neck isn’t straight. Truss rod tightens anti clockwise and was already maxed out when I bought it.  Bridge saddles can’t go any lower.

So being the idiot that I am, I took the neck off yesterday, loosened the truss rod then re tightened and, bang, the nut came off with an inch of rod with it. ?

I will contact Adrian tomorrow, I guess my options are limited to ordering a replacement neck unless miraculously someone can fit a new nut as the break is so close to the nut..unless it’s a welded unit.

if anyone has any experience of a situation like this, knows a great fixer in the London area, knows what the nut size is, or has bought a replacement neck from Adrian, I would be eternally grateful for any advice you can provide.

These basses have a lovely sound and nice feel so I do want to sort unless economically stupid.

Thanks, David

 

Link to comment
Share on other sites

21 hours ago, david1711 said:

So here is a tragic story. Acquired a lovely Elwood from this site about a year ago. Action has never been right. Mid to upper positions appreciably higher than first position. I hate that. Neck isn’t straight. Truss rod tightens anti clockwise and was already maxed out when I bought it.  Bridge saddles can’t go any lower.

So being the idiot that I am, I took the neck off yesterday, loosened the truss rod then re tightened and, bang, the nut came off with an inch of rod with it. ?

I will contact Adrian tomorrow, I guess my options are limited to ordering a replacement neck unless miraculously someone can fit a new nut as the break is so close to the nut..unless it’s a welded unit.

if anyone has any experience of a situation like this, knows a great fixer in the London area, knows what the nut size is, or has bought a replacement neck from Adrian, I would be eternally grateful for any advice you can provide.

These basses have a lovely sound and nice feel so I do want to sort unless economically stupid.

Thanks, David

Martin Petersen at the Gallery is still one of the very best I have met. If somebody can fix it in the UK its definitely him.

If you wanna order a new neck be aware they'll need the Body anyways. 

21 hours ago, david1711 said:

 

 

Link to comment
Share on other sites

Thanks both. Appreciated. I always thought you tightened truss rods clockwise but I guess not.

I wonder if I was just unlucky ( as well as being a numpty) with the neck. They are quite a soft wood so must be prone to more movement? Has anyone else had problems with low action consistent across the fretboard with Elwoods?

Such a shame because as everyone says, the sound, feel, look and quality for the price is great. 

I have emailed Adrian. Let’s see if he has the Christmas spirit.

 

.

 

 

Link to comment
Share on other sites

53 minutes ago, Mossiebass said:

I finally have something to contribute! Just paid the deposit on my Elwood 4p Custom. 

Some specs

32" Medium Scale

Ash body

Birdseye maple neck and board

Seafoam Green with matching headstock

Haussel pickups with bridge humbucker

 

 

Elwood C.png

:o:x And there I was thinking I was GAS free. Damn you, sir! :D

Link to comment
Share on other sites

18 hours ago, david1711 said:

Thanks both. Appreciated. I always thought you tightened truss rods clockwise but I guess not.

I wonder if I was just unlucky ( as well as being a numpty) with the neck. They are quite a soft wood so must be prone to more movement? Has anyone else had problems with low action consistent across the fretboard with Elwoods?

Such a shame because as everyone says, the sound, feel, look and quality for the price is great. 

I have emailed Adrian. Let’s see if he has the Christmas spirit.

 

hard to say. 1st time i hear about such problems as a dealer and a customer however if bass was bought used i suppose its hard to know what happened to it before you owned it.

hard to say. 1st time i hear about such problems as a dealer and a customer however if bass was bought used i suppose its hard to know what happened to it before you owned it.

 

18 hours ago, david1711 said:

 

 

Edited by pierreganseman
Link to comment
Share on other sites

1 hour ago, pierreganseman said:

hard to say. 1st time i hear about such problems as a dealer and a customer however if bass was bought used i suppose its hard to know what happened to it before you owned it.

 

 

My Cazpar and Elwood have the best actions I've ever played.  I'd suspect that somewhere in its history david1711's bass has been attacked by someone with not much skill and no knowledge of reverse-action truss-rods.  My basses came with a little maintenance & care booklet that explained how to adjust the action.

Link to comment
Share on other sites

I have a rattle on mine at the moment, which I think is related to the lack of tension across the A string (as I can just push it out of the slot easily, which I can't do with any other bass), and it goes away when fretted (anywhere). 

Action everywhere is fine though (on an elwood 3+2 24fret neck)

 

Link to comment
Share on other sites

55 minutes ago, Woodinblack said:

I have a rattle on mine at the moment, which I think is related to the lack of tension across the A string (as I can just push it out of the slot easily, which I can't do with any other bass), and it goes away when fretted (anywhere). 

Action everywhere is fine though (on an elwood 3+2 24fret neck)

all you need is a round file and 76 seconds. Take off the string and carefully make the nut "deeper" on the A string. Step by step ... until it goes away.

I have had that 3 times on customers basses. 1st one went to a local luthier and got told it needed a refret / levelling for 300 euros. Adrian sorted it in 39 seconds at his HQ.

do make sure you have enough winding around the tuning peg. 

 

Quote

 

 

IMG_7410.jpg

Edited by pierreganseman
Link to comment
Share on other sites

2 hours ago, CameronJ said:

Ooh that 5er is lovely. There was a time when I used to hate red basses but now I really have a thing for them - especially with maple necks!

It is a great bass. Plays sooo very nicely - a beautiful neck. That pic doesn't really show the body wood of the 4 string, which is very nice too!

 

 

IMG_0902.JPG

Edited by Wilco
Link to comment
Share on other sites

11 hours ago, mrtcat said:

5 weeks into the wait for this. Carbon rods in neck, Aguilar 60s j pickups, swamp ash body, passive electronics (I have an easy j retro sitting here waiting to go in) , luminlays. Looking forward to it.5a36c89e76f8c_ElwoodC.thumb.png.8c5c61eaa4df6db4f70bb7af9e9678ed.png

 

Nice! Remember to share the sofa shot when you get.

  • Like 1
Link to comment
Share on other sites

On 15/12/2017 at 18:25, pierreganseman said:

all you need is a round file and 76 seconds. Take off the string and carefully make the nut "deeper" on the A string. Step by step ... until it goes away.

I have had that 3 times on customers basses. 1st one went to a local luthier and got told it needed a refret / levelling for 300 euros. Adrian sorted it in 39 seconds at his HQ.

do make sure you have enough winding around the tuning peg. 

I have a file, and more than 76 seconds, so I will give that a try.

 

There actually isn't much winding around that tuning peg - is that a problem?

Link to comment
Share on other sites

9 hours ago, Woodinblack said:

I have a file, and more than 76 seconds, so I will give that a try.

 

There actually isn't much winding around that tuning peg - is that a problem?

"isn't much" is hard to say but can be yes indeed ..... so try changing strings and put enough (more?) winding around the peg before going for nut filing :)

Link to comment
Share on other sites

Tried the string, slight improvement, filed the nut a bit, took a bit longer than 76 seconds, but all is good now as long as the string comes out from the base of the tuner.

I think it is probably lacking one of those string tree things to hold it down, I suppose that is a problem with a non angled fender style neck.

Link to comment
Share on other sites

1 hour ago, Woodinblack said:

Tried the string, slight improvement, filed the nut a bit, took a bit longer than 76 seconds, but all is good now as long as the string comes out from the base of the tuner.

I think it is probably lacking one of those string tree things to hold it down, I suppose that is a problem with a non angled fender style neck.

 

Maruszczyk standard heads are slightly angled so you specifically do not need one of those but you must have enough winding and sometimes some minutes of nut filing are needed. :)

Link to comment
Share on other sites

I think it's just their preference for a slightly shallow cut nut. My Jake headstock is angled, but no rattles and everything was fine until I played an old part with a 2nd fret bend on the A string... popped straight out. luckily it was rehearsal rather than a gig.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...