warwickhunt

The fret buzz is a process of elimination and something we could all likely throw ideas at but most have been discussed. Low rear pup output; I think part of this depends on your expectation. I've never found the rear pup on any PJ set to be 'powerful' in comparison to the neck unit, even when adjusted correctly but MEC do need to be adjusted quite close to the strings. Ideally you need to get another SSI and do an A/B (too far from me). I'm no whizz with the electronics side but can you not get an imbalance in outputs from a pan pot if the value of the pot isn't correct, are the pots original or could one be failing?

We'll pop round to the Geordie guys house if you like!

[quote name='JTUK' timestamp='1453493892' post='2960104'] I'd say someone would get a great set-up for £800.... but like all these things??? [/quote] Just saw a mint GS212 sell down the road from me last week at £350 and the month before an AG500sc went for less than £350... so that's a great set-up for £700!

Easiest thing to get an accurate true value is do a search through the BC sales section. Problem with asking an open question,is that someone thinking of buying will say less than the true value (after all they want it cheap), folks who have them or looking to sell, will want to say more than market value! :/ The truth is that they are worth what someone is prepared to pay.

Never ceases to amaze me!

[quote name='2elliot' timestamp='1450962756' post='2937408'] I met him in Newcastle back in the early 90s, I think it was a Trace Elliot or Warwick promo tour. [/quote] TE and it would have been somewhere in Jesmond if it's the same one I went to.

Does mixed speaker diameter and EQ get much discussion? As a non-technical type bassist, I always wondered (way before t'interweb) how you EQ your signal when using mixed drivers (separate cabs). Common sense would dictate that if you were EQing your sound it would be a compromise between the cabs, whereas identical drivers/cabs would take the same EQing... does that make sense?

My current Zon. [URL=http://s54.photobucket.com/user/warwickhunt/media/da540df8-3d4d-4615-8809-15299aae25db_zps7pel9mgs.jpg.html][IMG]http://i54.photobucket.com/albums/g119/warwickhunt/da540df8-3d4d-4615-8809-15299aae25db_zps7pel9mgs.jpg[/IMG][/URL]

[quote name='Dazed' timestamp='1452709174' post='2952757'] Nice zon marcolisticuffs John why not just add a mag pup ? [/quote] Buffering between the two systems would be a minefield. Going to bite the bullet and just look for another Zon.

[quote name='King Tut' timestamp='1452722641' post='2952953'] Might help to say where you're based :-) [/quote] I'm guessing from FB page it's Laandan!

Soooo tempted to take the Lightwave system out of my Sonus and drop in Barts. Love the Lightwave system for 'everything' except palm muting, which due to the way it works means you don't quite get the same thud as mags give.

Got one of the TC RS112's and A/B with my TC RS210, the 12 had a bit more mid presence with not quite as much bottom end BUT that isn't to say the 12 lacked bottom end (the 210 is a bigger cab) and a pair would be great. It does depend on what environment and the job expected of them but they are a good cab, especially at the Thomann price!

I've highlighted the cost of a new one. Response was that you'd need to pay for delivery and I could make an offer... a buyer would need to pay postage for his (unless collecting) and an offer of £50 might insult!

[quote name='Bassassin' timestamp='1451131766' post='2938438']I remember. The bad old days - and basses back then were just too damn light too. I'm sure I'd have kept my Peavey T40 if only it had had an extra 5lbs of wood between the top horn & 12th fret. What were they thinking?[/quote] Hmmm... so my bass weighs less than 8lb, if I take 5lb off for the cut; I'd better get some lead to stop it floating off!

To be fair, I've just noted your upper budget is £1000... my suggestion was aimed more at your lower end budget! One point of note is that stuff like speaker/mic stands and all of the various leads need to be budgeted for because they eat up budgets.

You'd be better off (for your budget) looking at passive cabs such as Peaveys, Power amp can be any make but go for 1000w+, Yamaha do a very good desk MG16cx I think it is. You'd get all of these used within your budget.

[quote name='tauzero' timestamp='1451824369' post='2943675'] Thomas Eich starts up another company and comes up with something else interesting. [/quote] I'm fairly sure that this'll be the logical step.

[color=#141823][font=helvetica, arial, sans-serif] Modding a 4 string to a 5... not seen it done like this before! [/font][/color] [color=#141823][font=helvetica, arial, sans-serif] [URL=http://s54.photobucket.com/user/warwickhunt/media/4-5_zpsrttlt5ts.jpg.html][IMG]http://i54.photobucket.com/albums/g119/warwickhunt/4-5_zpsrttlt5ts.jpg[/IMG][/URL][/font][/color][color=#141823][font=helvetica, arial, sans-serif] [URL=http://s54.photobucket.com/user/warwickhunt/media/4-5%20ii_zpsi0t22h2a.jpg.html][IMG]http://i54.photobucket.com/albums/g119/warwickhunt/4-5%20ii_zpsi0t22h2a.jpg[/IMG][/URL][/font][/color][color=#141823][font=helvetica, arial, sans-serif] [URL=http://s54.photobucket.com/user/warwickhunt/media/4-5%20iii_zpspncd8sqm.jpg.html][IMG]http://i54.photobucket.com/albums/g119/warwickhunt/4-5%20iii_zpspncd8sqm.jpg[/IMG][/URL][/font][/color] [color=#141823][font=helvetica, arial, sans-serif] http://www.ebay.de/itm/Warwick-Streamer-Bass-Stage-one-5-Saiter-1985-/231801226355?[/font][/color]