SubsonicSimpleton

Will you be playing original music, and gigging on the circuit that caters to original bands, or will you be playing covers? Where will you rehearse, in a commercial rehearsal facility or will you be rehearsing in an environment where you have to provide everything yourselves? Where will you be storing your gear? Where are the venues you are most likely to end up playing, and are they easily accessible by vehicle for loading? If for instance you are playing all original material in a big city, you might not need an amp at all and putting your money to a high quality DI solution that gives the sound you want and can be fed into the efx return on practice room/shared backline or direct to the PA on larger gigs might be a better solution than an amp.

Although Trace made a range of amps badged with different ratings, if you inspected the actual amp modules inside the heads you might just find that they had a practice of putting higher rated modules into lower output badged amps to meet production targets - economies of scale would have made a big difference to their bottom line, and it's important to remember that Trace were not manufacturing on the same scale as Fender/Hartke/Ampeg/Marshall.

If you identify the riff variations, then practice them individually till you have them spot on, then practice swtitching between the different variations with a metronome until the transition is smooth, you will absorb the phrases into your own playing vocabulary and they will come out naturally after a period of time. In the short term, as long as you have a couple of the easier variations down it will get you through the gig - as @peteb pointed out having a handle on the underlying chords which form a simple repeating chunk of information is more important than trying to process a long stream of notes if you are struggling to retain the structure.

Is the port really 8.2 cm tall internally? There is an enormous difference in port cross sectional area between the two porting suggestions, you could try plugging in a smaller number for the square port (either just the central portion, or just the two corner portions) bearing in mind that you can reduce the port cross section by adding material under the port shelf fairly easily. Really this needs some input from the forumites with more loudspeaker design knowledge than myself calling @stevie @Bill Fitzmaurice who can probably shed a more expert view on the port tuning aspect - the circular port suggestion has a much higher resonant frequecy than the square one, so there may be other factors to consider beyond taking the numbers from winIsd at face value.

Your cab is already ported - rather than sealing the existing port and cutting a different shaped one, surely it would make more sense to tune the length of the exiating port appropriately. There are both commercial and DIY cabs that use slot ports, here is a link to the download page for the Fearful range of cabs which use slot ports, take a look at the plans and it should become clear how the slot ports are implemented. http://greenboy.us/fEARful/DL/ With a little ingenuity you could make a two piece shelf that could easily pass through the existing speaker opening (I would layer two thinner pieces of ply like this - viewed from the cab front) AAAAAABBBBBBBBBBBBBBBBBBB AAAAAAAAAAAAAAAAAABBBBBBB ..............S..........................S................ Both pieces (A) glued together beforehand into one piece, likewise with pieces (B), then you have a large mating surface to glue the two pieces together inside the cab. If you size the pieces so the long layer of each piece extends to cover both braces(S), you will be able to screw the port shelf down securely to dry fit and finesse the tuning before committing to fixing the shelf more permanently within the cab or glueing the two halves together.

Might be worth having a lesson with a pro bass guitarist - they should be able to identify very quickly whether the root of your problem is instrument setup/your technique/other signal chain issues. If you are a beginner, it is quite possible that your understanding of setting up your instrument is flawed (I've rescued a number of intruments from bad DIY setup attempts). Take a look in this thread There may be a friendly basschatter local to you who would be willing to take a look at your bass with you - sometimes small adjustments can make a world of difference.

Just seen a video about the video in the OP, that sheds some more light on this by way of interview with the person who shot the footage.

Why on earth hadn't the band registered the name themselves?? Even at the lowest levels of the music industry bands get into disputes over name usage, and if you intend on selling merch or recorded music one of the first things you should do is check that the cool name you just came up with by your band isn't already owned as a trademark or likely to land you in hot water with a big corporation who already owns the name (even if none of their products are music related) - I know a band who just had to scrap all their merch and CDs because they didn't do any due diligence in this respect. This isn't really stealing so much as it is incompetant management - it still sucks for the band, but anyone who has been involved in the music industry for half a century should be well aware how mercenary and backstabbing it can be whenever money is at stake and should have taken measures to protect themselves many years ago.

As no-one has mentioned him yet I'm going to have to show Mani from the Stones Roses some love - danceable tunes within the tunes, what's not to love about that.

They must be a bit skint after the Duke lost his no claims bonus.

Reading through the details they say they are going to provide accomodation and food for the duration, but it doesn't explicitly state that the gig is unpaid or paid. Has anyone actually applied and raised the remuneration question?

Is Donald Trump moonlighting as a business consultant for Gibson on the quiet?

Make yourself a simple jig to test the pickup positions and combinations in the same way that Leo Fender did, and listen to the sound they make rather than other peoples opinions.

Why not just use the existing bass drum and hihat pedals which you know will work, and just assign a snare sound to the hihat pedal - you might want to rotate the snare pad out of the way, but surely using what's there already is the most straightforward solution.

Given that they are listing multiples in stock of various antique brass instruments at similar price to the basses, my guess would be that if you order you will receive a photo or poster of the item you have bought.

This Propellerheads remix is my personal favourite

I hate to be the one to break this to you, but there was a good reason that Rob Halford used to dress like he was going to a gay BDSM dungeon....

Back in the day, it was important to use the same tuner to tune all the instruments - even if you set the reference frequency the same across multiple tuners (same brand/model or not) the circuitry contained multiple discreet analogue components which are all subject to manufacturing tolerances. All those +/- 2/5/10% variations add up, which results in "identical" circuits not behaving in an identical manner, in mass produced items the components are just slapped in to keep price down, in some professional level recording equipment the manufacturer will measure and reject components that fall too far out of spec or place extra time and care matching components when they are to be used for example as a stereo pair.

You can use this type of music stand and cut down the top to a more suitable size https://www.amazon.co.uk/Tiger-Orchestral-Conductors-Adjustable-Music/dp/B002GOHCTA Its a more agricultural approach than the clips, but wont fall to pieces or need replacing with a different model if you change your tablet/case. Worth looking around if you go this route as these type of stands can be picked up for as little at £10 new from some of the big music etailers, and even less used.

Is it worth revising the horn cutout so it can be used in either orientation and allow the cab to double for PA duty?

Do Fractal actually have any dealers where you can walk in and hear a unit in person?

Just a thought, but it might be worth disinfecting the cavivites and neck pocket with tea tree oil to kill any potential mould/spores. Looks like you got a nice result from the application of a bit of elbow grease though.

One important factor here is what is driving the prices up at the moment? I might be wrong about this totally, but for the most part it would seem that the primary market for expensive vintage/collectors instruments is mostly middle aged and older people with money - if you want to offload a bunch of expensive instruments, what happens if all the old farts are needing to sell off their collections to fund living expenses and the younger generation are either too skint, or not that interested (on the basis that music tech has moved on, and their musical heroes don't have the same associations with certain instruments in the same way that someone growing up in the 50/60/70s would have witnessed but been largely unable to afford at the time). If you are a famous old fart with a large instrument collection like Geddy Lee or Joe Bonamassa, then the celebrity association inherently adds value and desirability, but if you are joe public then I'm not so sure.