-
Posts
982 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by Acebassmusic
-
Welcome to Basschat goatee, from another one up north :-)
-
Check out the Grosmann Bass Mute at the bottom of the Bass Direct page. Might be of interest. Grosmann Bass Mute
-
Hi there ZombiPyrate. Welcome to Basschat and congratulations on learning to play the best instrument Have fun with it and I found the quickest way of learning is to get with others to play a few tunes. Scary to start with but mucho fun.
-
Just bought a Sadowsky preamp from Chris. Easy transaction and in good condition. Many thanks Chris
-
Ritter Roya 10th Anniversary Ltd - *SOLD*
Acebassmusic replied to Acebassmusic's topic in Basses For Sale
-
I used to have a Musicman Sabre with fretted and fretless Gordon necks. The fretless had a brass slap plate at the end of the fretboard which brightened up the slap sound a little but also protected the end of the fretboard. If I was going down the fretless route again I would have one fitted.
-
They do take a little bit of getting used to but worth persevering. I'd rather feel slightly isolated for short periods than very isolated 24/7 from not using them. YMMV :-)
-
+1000000000000000000000000000 In all the thousands of pounds I have spent over the years on different guitars, amps, pedals, cables etc I can easily say that the molded earplugs I have are the best money I've spent on musical equipment. No more ringing ears, discomfort etc. I can hear the band better. Mine are the earlier Elacin ER15's (about 10+ years old), still going strong but I'm thinking of treating myself to a new updated pair.
-
You can get PCI to PCIE adapters off 'tinternet.
-
Strange....I'm on Win10 and currently using a 2496 PCI card. I can't get the MAudio software interface up but the card is running and I can access the SPDIF settings etc through Windows standard menus. (Just read your full post and notice you don't have a spare socket...oops)
-
I know who the seller was as he's a local musician. To be truthful I was just a little tempted myself :-)
-
Can you convert a 34" bass to a 35" scale ?
Acebassmusic replied to weepaul's topic in Repairs and Technical
You'd need to move the bridge......and all the frets! Best just buy a 35 if you really want one :-) -
For sale is my Jabba Custom 5 String with Mayones hard case both in very good condition. The only defects I could see on the bass were a couple of small marks on the headstock end and one on the binding by the 2nd fret. Pictures showing this are attached. Body - Swamp ash Top - Poplar Flame Burl / Matching Headstock Neck - Maple Fingerboard - Maple Scale - 870mm (34,25") String spacing - 19mm Frets - 24 medium jumbo Markers & inlays - Black blocks and binding + side-dots Tuners – Schaller, chrome Bridge - Chrome bridge Pickups & Electronics - Delano pickups with Active Delano 2 band preamp Control - 2 x Volume, Stacked bass/treble, tone, active/passive switch Body & neck finish - Gloss Weight : approx. 4.8kgs / 10.6 lbs Additional equipment - Graph Tech nut, Dunlop Security Straplocks, Hard Case Comes with original Mayones hard case in very good condition. Shipping in the UK is approx. £30
-
As part of my ongoing equipment change out I have 1 pair of Bose MK II speakers complete with lids (all catches working). I have only used these as monitors (controlled by a DBX Driverack – not included) but they can be used as PA tops. With the curved front (120 degree dispersion) we found them great for monitoring as everyone could hear what was coming out, not just those stood directly in front. Nominal impedance: 8 ohms Power handling capacity 240W continuous pink noise, 55Hz – 16kHz Connectors: Two (2) parallel-wired retrofitted Speakon and two (2) parallel-wired male XLR connectors Dimensions 13" (H) x 201⁄2" (W) x 121⁄2" (D) (33 x 52 x 32 cm) Weight 34 lb (15.5 kg)
-
I’m now asking £180 for the lot I’m currently changing out my lighting equipment and have 2 sets of Botex T4 Lighting showbar, par 56 cans, 300w bulbs, flightcases, cables & stands. They are fully working and come complete with Protex flight cases. The bars can be used independently and as a linked pair as well as being controlled using DMX. Information, manuals and pricing is easily available on the internet and the whole setup would have originally cost nearly £750. All the units and cases are in full, good working order.
-
I’m currently changing out my lighting equipment and have 2 x iMove IM-5S moving heads complete with Prolight flight cases, DMX cables, spare bulbs and install brackets. The heads can be used independently and as a pair but the most flexibility and control comes with the iSolution DMX controller included in the sale. Information, manuals and pricing is easily available on the internet and the whole setup would have originally cost nearly £900. All the units and cases are in full, good working order. I’m asking £240 for the lot
