Acebassmusic

Bump

@Auslander Shadowalka doesn't seem to have visited this thread in a while. The bass was put up for sale a month or so ago in Bass Direct and it looks like they sold it. Maybe try PM'ing him? Good Luck.

45mm

For sale is my virtually unused and definitely unmarked Hercules GS401 acoustic guitar stand. These are £25 new.

For sale is a AKG D112 mic. These are usually used on kick drums but can be used on bass cabs. It comes with a K&G 25950 mic stand. Both in very good condition and fully working. New these would be £150.

Yes, sorry missed it off the advert but now added - on my scales approx. 4.8kgs / 10.6 lbs

For sale is my Jabba Custom 5 String with Mayones hard case both in very good condition. The only defects I could see on the bass were a couple of small marks on the headstock end and one on the binding by the 2nd fret. Pictures showing this are attached. Body - Swamp ash Top - Poplar Flame Burl / Matching Headstock Neck - Maple Fingerboard - Maple Scale - 870mm (34,25") String spacing - 19mm Frets - 24 medium jumbo Markers & inlays - Black blocks and binding + side-dots Tuners – Schaller, chrome Bridge - Chrome bridge Pickups & Electronics - Delano pickups with Active Delano 2 band preamp Control - 2 x Volume, Stacked bass/treble, tone, active/passive switch Body & neck finish - Gloss Weight : approx. 4.8kgs / 10.6 lbs Additional equipment - Graph Tech nut, Dunlop Security Straplocks, Hard Case Comes with original Mayones hard case in very good condition. Shipping in the UK is approx. £30

As part of my ongoing equipment change out I have 1 pair of Bose MK II speakers complete with lids (all catches working). I have only used these as monitors (controlled by a DBX Driverack – not included) but they can be used as PA tops. With the curved front (120 degree dispersion) we found them great for monitoring as everyone could hear what was coming out, not just those stood directly in front. Nominal impedance: 8 ohms Power handling capacity 240W continuous pink noise, 55Hz – 16kHz Connectors: Two (2) parallel-wired retrofitted Speakon and two (2) parallel-wired male XLR connectors Dimensions 13" (H) x 201⁄2" (W) x 121⁄2" (D) (33 x 52 x 32 cm) Weight 34 lb (15.5 kg)

I’m now asking £180 for the lot I’m currently changing out my lighting equipment and have 2 sets of Botex T4 Lighting showbar, par 56 cans, 300w bulbs, flightcases, cables & stands. They are fully working and come complete with Protex flight cases. The bars can be used independently and as a linked pair as well as being controlled using DMX. Information, manuals and pricing is easily available on the internet and the whole setup would have originally cost nearly £750. All the units and cases are in full, good working order.

For sale or trade is my spare Stagg +48v phantom power supply useful for condenser mics etc. Its in good condition and had very little use as one I had bought it I changed my mixer to one with +48v on board.

I’m currently changing out my lighting equipment and have 2 x iMove IM-5S moving heads complete with Prolight flight cases, DMX cables, spare bulbs and install brackets. The heads can be used independently and as a pair but the most flexibility and control comes with the iSolution DMX controller included in the sale. Information, manuals and pricing is easily available on the internet and the whole setup would have originally cost nearly £900. All the units and cases are in full, good working order. I’m asking £240 for the lot

3 or 4 knob? With plate? With knobs? With VTC? Thanks

Price now includes mainland UK shipping.

Bump