Jump to content
Why become a member? ×

All Activity

This stream auto-updates

  1. Past hour
  2. Hi. I’m thinking of selling my Korean Squire pbass. It dates back to 2010. I did buy it here a few years ago. I’ve no idea what the value is can you help ? I think it’s a VM as it has Seymour Duncan 1/4 pounders Schaller Machine heads and a Kiagon loom. Thanks
  3. Tonight BBC2, 10.50pm, Radio 2 in the Park, Def Leppard.
  4. I have a pair of new old stock FaitalPRO 12PR320 12" drivers sitting here doing nowt. This is the driver used in the Basschat 1x12” cab design (Mk1 I believe). I was going to build a 2x12 cab using these but then a lovely Vanderkley 2x12 came up local to me so the project has been shelved. I also have a complete set of good quality plywood panels to construct the 2x12 available to go with them but due to the weight, the plywood will be collection only. So £250 collected, or buyer to pay postage on the drivers. Plywood available as a package deal with the drivers for an additional £50 but collection only.
      • 1
      • Like
  5. ...my well considered choice. I tried online banking once and it didn't suit me. I don't agree to the Ts&Cs. I helped to develop home shopping with one of Tesco's risk sharing partners. This was pre-iPad using wireless Fujitsu Team Pads. We employed ethical hackers so I'm not ignorant by any means. I got through lockdown with no online transactions whatsoever. I don't feel restricted in the slightest. Internet dependency is something I just will not buy into. I had 'nuff trouble giving up smoking. And another thing! (heeheehee) - It worries me somewhat that all landlines are being dropped in favour of VOIP. Eggs, one basket, whoops... oh dear. Basschat is my window into social media and that's as far as that goes. I prefer wetware to hardware and software most days anyway. I love a good old rant, me.
  6. Boxed and bagged, with power lead (not pictured). Great condition. Price is posted UK. Power: 200 watts at 4 ohms and 130 watts at 8 ohms Input Level with signal level display Ultra-high input impedance precursor especially for passive basses 3-Band EQ filters for classical trace-sound Post EQ XLR DI output Ground Lift switch Headphone output: 6.35 mm Dimensions (H x W x D): 3.4 x 17.1 x 10.4 cm Weight: 0.73 kg Incl. Trace-Elliot nylon carrying case
  7. SHURE BETA 57 A MICROPHONE A GENUINE SHURE MICROPHONE IN ITS OIRIGINAL POUCH Used but As new condition , clean and sanitized I have upgraded to the shure Nexadyne microphone so this is now surplus to requirements. A excellent microphone . Also selling some other studio pieces so check my other items for sale. Current RRP £175. A bargain buy at £85 Free postage within uk mainland or welcome to try and collect from Cambs pe285ap Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse Neodymium magnet for high signal–to–noise ratio output Minimally affected by varying load impedance Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration Legendary Shure quality and reliability What is the Beta 57A best suited to? It’s a premium instrument mic ideally suited for the professional musician looking to mic up many types of amplified and acoustic instruments such as guitar amps, acoustic guitar, saxophone, snare drum and brass. It can also be used by vocal artists. The Beta 57A has the quality and ruggedness to be used both on stage and in the studio. What are the characteristics of the Beta 57A? It has a tailored frequency response provides warmth and presence and maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off–axis tone coloration. The hardened steel mesh grille facilitates use of proximity effect as well as resisisting wear and abuse.
  8. I see no pics…
  9. I got rota'ed out of remembrance Sunday because I wanted to come to this!
  10. Mad weekend with the live tribute show, but on Friday I met up with my webcast friends Mike Brooks and Jaymi (the Pink Bassman) who was over from the USA, and had a nice curry evening with Toby from JayDee in Birmingham. Saturday was a looong four hour trip to Gorleston Pavillion Theatre near Gt.Yarmouth for an Everlys & Friends Live Tribute Show gig. Absolutely packed house and a fantastic evening, followed by getting home at 2.30am. Crawled out of bed on Sunday morning after far too few hours of sleep and drove to Leeds to play an afternoon matinee show at Yeadon Town Hall Theatre. I was planning to meet up with Mike and Jaymi again this evening after the Nick Smith Memorial in Peterborough, but unfortunately didn't get out of Yeadon until nearly 5.30 and Mike got a short notice gig. I will sleep well tonight! Gig art: American Performer Mustang under the stage lights behind the side tab curtains.
  11. Wow that's restrictive - I get most things online and rarely have a problem - indeed that's where all my Trace Elliot finds come from! The chap who 3D prints the ports is active on the facebook trace elliot group which was where the idea for someone with the ability to print them came from. He also does the red and green caps for the gain and volume pots which I have got from him before. The 1818 is the normal single 18" speaker (plus two tuning ports), whereas the 1818x denotes "special application" and was a Mark V and before thing - there was a discussion about them a few months back on the following (the thread itself is 15 years old but someone nercro-bumped!):
  12. Playing in Newquay at Project 83 in a couple of weeks with our friends, Tüsk. Promises to be a fun night and free entry!
  13. Thanks Dave, yes I was very privileged to have acquired it a while back off of rumblefish on here, mr robin vick . Enjoying the lighter gauge strings on it too .
  14. Chadu25

    Darkglass Anagram

    Quick test of this Jule Monique NAM I found in Tone3000. Channeling my inner Sean Hurley lol. No experience of the real thing, my benchmark as I tweak this is from Jo Choui’s demos in youtube. Wish I had the money to own one. Added a light drive from the VMT for some subtle saturation. I’m liking this setup than the Gentle(Noble) block I usually use. Let me know what you think! NAM Capture by gtirard: https://www.tone3000.com/tones/jule-amps-monique-31287 Bass used is a Dingwall SP1 with La Bella Low Tension Flats
  15. YouCut_20250907_210237914.mp4 Sorry, I seem to have turned this poster into a video without animation! Anyways, we're playing our first Southampton gig next Sunday for the Music In The City festival. Loads of artists playing across the city over 2 days including the Sunday when Saints play Pompey at St Mary's...luckily we're under St Michael's church when we play 👍🏻 Looking forward to this one, haven't played in Southampton for over 10 years, my old band used to play all those lovely venues around the city that liked original music...those were the days eh? 😄
  16. Probably, this one I'd think. Still safe and sound.
  17. Not last night, but Friday night, played a rare live outing with The Inevitable Teaspoons at Krakatoa in Aberdeen. We played last ("headlining") and were treated to some fine acts first - Kaleidoscope and then Autohuman. No pics, it was a bit of a rushed changeover because as usual things ran on a bit. We played pretty well and went down favourably, heard someone describe us as "entertaining", and was speaking to the guitarist from Autohuman after and he was keen to do gigs with us again. It wasn't super busy, but there was an enthusiastic gathering of about 20 folk up front and probably 10-20 more skulking at the back, so eh, as long as it wasn't empty! Gear was the Greco LGB-700 three pickup bass into my pedalboard then out into Krakatoa's FOH, using a Markbass Little Mark Black Line 250W into an Ampeg fridge for monitoring. Because why not?
  18. ...and there's a guy works down the chip shop, swears he's Elvis... I don't do online purchases and I seldom look at eBay or Gumtree other than to add to my knowledge of what's out there. There are people on BC who could do (and have done) 3D prints for me if I supply the detailed spec or an original part for scanning. The 1818x that you referred to has a ten inch driver. Mine has just the 18inch cone with two front facing reflex ports. I was told it was an 1818. I must check the data plate at some point but it's too heavy for me to be arsed moving it.
  19. Today
  20. Sadly I am out for this one. It's Rememberance Sunday. I'm in the band for the church service and we're playing one of my songs to close. Hope the venue survives the LF onslaught!
  21. We're gonna need a bigger venue reinforced floor!
  22. Love that bass of yours. Dave
  23. The wenge neck has arrived. I already rolled the fretboard edges and sanded the back of the neck. The frets have been levelled and dressed. It is going to have a cream pickguard, chrome USA Hipshot Ultralites (courtesy of Lozz selling some on here) , chrome GOTOH bridge, Schaller strap lock buttons, Tone Emporium TE18 pickups and Bloodstone Guitar Works P bass electronics with .047uF cap. It will be strung with D’adaddario .45 - .105 EXL If you fancy buying this bass, get in touch, it is going to be around £700-750 mark
  24. Someone asked me on the thread below about seeing some of the Trace Elliot cabs I've been collecting and fixing. I'd be happy to see how much I can squeeze in the car, although if there are thoughts of a cab comparisons I could probably bring a 1x15, 1x18, 2x10 and 4x10, and maybe also the classic 2x10 + 2x5 cab favoured by Mark King, albeit space may prevent this!
  25. For sale is the Microtubes B7K Ultra V2 which has the AUX input as well. Great sounding pedal with amazing ability to sculp both the tone on the preamp side and the distortion on the drive side of the pedal. There is some very impressive sounds that can be had out of this pedal. The pedal comes with the original box and all the goodies that came with it. I bought this pedal 3-4 years ago but the sound is a bit too much for the bands I am in. I was always hoping to use it but it has literally sat in the box the whole time. I had thought I might use it also as an emergency DI for gigs but I have never needed it. I would be really interested in trades for Iron Polytope because the funds coming from this will go towards this pedal. Possible option would be OE DCX. If I was playing heavier music this pedal would absolutly be staying. £270, £260 including postage. Bank transfer or PayPal F&F.
  26. I have the 2EQ model - I think they record better but that my be my prejudice! GLWTS
  27. RE port liners, yes thet do break frequently so I don't have any not in use, but there is a guy on ebay who 3D prints them: https://www.ebay.co.uk/itm/167033823085
  1. Load more activity
×
×
  • Create New...