Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

DIY Effects


JackLondon

Recommended Posts

6 hours ago, KingBollock said:

I like to socket ICs, so I had a quick look to see if it is possible to socket SMD ICs, and it is. It’s possible to convert SMD to DIP. I was kind of hoping that there was a way of making using SMD ICs easier, maybe some kind of clamp system, or something. I don’t know. I have never used SMD stuff before, I don’t think. But, anyway, at least it appears that I can use SMD ICs (I don’t know about other components, I didn’t look) on vero-board.

 

I have narrow soldering iron tips. One comes to a 1mm wide flat tip and another comes to a point. So I should be alright there.

 

I’m a bit of a dinosaur with this stuff. Most of my electronics experience comes from college (including work placements) from 1991 to 1993. And I’ve forgotten most of it.

 

You can get adaptors but you need to solder the SMD IC to them. For a typical 8-pin SMD IC, there aren't sockets available, unlike DIP ICs. I've got small soldering iron bits but I'm not very good at keeping things steady (including my hands) - I find it's the feeding of the solder that tends to go wrong.

Link to comment
Share on other sites

9 hours ago, KingBollock said:

I like to socket ICs, so I had a quick look to see if it is possible to socket SMD ICs, and it is. It’s possible to convert SMD to DIP. I was kind of hoping that there was a way of making using SMD ICs easier, maybe some kind of clamp system, or something. I don’t know. I have never used SMD stuff before, I don’t think. But, anyway, at least it appears that I can use SMD ICs (I don’t know about other components, I didn’t look) on vero-board.

 

I have narrow soldering iron tips. One comes to a 1mm wide flat tip and another comes to a point. So I should be alright there.

 

I’m a bit of a dinosaur with this stuff. Most of my electronics experience comes from college (including work placements) from 1991 to 1993. And I’ve forgotten most of it.

As with so many things, it just takes a bit of practice and technique refinement and then the larger format SMT parts are not that big of a deal, IMO and IME. I've gotten my own SO-8 to Dip converter boards made up but thankfully I rarely need to use them these days. There are perfectly decent DIP opamps readily available, and if "close enough" is one's style that's that. I find no joy there, but I've been at this a very very long time and need a progressively bigger hit to justify even bothering by now. 😉

Link to comment
Share on other sites

44 minutes ago, tauzero said:

 

I always use 60/40 22swg multicore. It's still easily available on That Ebay.

Yes! Toxic fumes aside lead/tin is magic stuff!

 

I trained myself to resolver using lead free as my sons were showing an interest in it, and I didn’t want to poison them slowly. I doubt I’ll go back to 60/40 now just because I’m used to lead free stuff now, but damn it was easy to work with!

Link to comment
Share on other sites

1 hour ago, itu said:

Rosin and resin burn, yes, but you get the same stuff from lead free solder, too.

 

You don't get the lead fumes from lead-free solder, which is rather the point. It's not enough to be a danger to a hobbyist but if you're soldering all day every day or doing flow soldering it is a hazard.

Link to comment
Share on other sites

The boiling point/Vaporisation temperature of Lead is 1750 Celsius or over  4 times the temperature of a soldering iron. That suggests the fumes are purely from the flux.

 

I remember when lead free soldering came in a Panasonic and the fault rate from dry joints shot up. However I have used both types and personally never has a problem.  The iron does need to be hotter though for lead free.

  • Like 1
Link to comment
Share on other sites

The fumes from both forms are largely the flux, you're not inhaling lead (or tin) from 60/40 fumes no more than you're inhaling silver from lead free fumes. Flux isn't exactly good for your health either, so extraction is always advisable.

 

60/40 is a health Hazard because of the solid lead particles that are inevitably released when handling it. How many of us who use it as hobbyists are washing our hands thoroughly after soldering, wearing disposable gloves, making sure we don't cross contaminate tools, coffee mugs etc.? I used to work for a CEM and our work instructions for leaded builds included the phrase "raw chicken".

 

  • Like 2
Link to comment
Share on other sites

2 hours ago, Chienmortbb said:

On that point, where does everyone buy their solder from? My last lot came from Maplin RIP

Contrary to apparently very popular belief, there's no blanket ban on the sale of leaded solder. The RoHS/REACH/WEEE etc. Regulations apply to commercially sold products. There's also a lot of confusion due to the soldering crossover with plumbing, where obviously it is banned. 

 

Many retailers restrict the sale to "professional users" due to new guidelines from the HSE. Some places like rapid and I think RS do this by limiting it to credit account customers. Farnell and CPC have the same restriction in principle but you can successfully check out as a guest. A variety of smaller places will also sell it freely with similar restrictions in principle, but no enforcement.

  • Like 1
Link to comment
Share on other sites

11 hours ago, bobbass4k said:

The fumes from both forms are largely the flux, you're not inhaling lead (or tin) from 60/40 fumes no more than you're inhaling silver from lead free fumes. Flux isn't exactly good for your health either, so extraction is always advisable.

 

60/40 is a health Hazard because of the solid lead particles that are inevitably released when handling it. How many of us who use it as hobbyists are washing our hands thoroughly after soldering, wearing disposable gloves, making sure we don't cross contaminate tools, coffee mugs etc.? I used to work for a CEM and our work instructions for leaded builds included the phrase "raw chicken".

 

 

According to https://weldingmastermind.com/can-you-get-lead-poisoning-from-soldering-heres-the-truth/ there's both lead dust and lead contamination of fumes.

 

I must admit to liking the smell of resin fumes.

Link to comment
Share on other sites

1 minute ago, Smanth said:

Would that be in the morning?  Does it smell of victory?

 

S'manth x

 

I was resisting the temptation, especially as (until now) I've done my soldering at evenings and weekends, and the only purpose of Saturday and Sunday mornings is breakfast (which should not be eaten while soldering).

  • Haha 1
Link to comment
Share on other sites

16 hours ago, tauzero said:

 

According to https://weldingmastermind.com/can-you-get-lead-poisoning-from-soldering-heres-the-truth/ there's both lead dust and lead contamination of fumes.

There was this comment in the original link:

"Lead Poisoning Through Inhalation

 

If the solder contains lead, the melting process can release fumes that contain lead contaminants."

 

I checked all links that were included in the text (and some extra, just in case). Not a single had anything related to "fumes that contain lead contaminants" except this Weldingmastermind's. As @Chienmortbb wrote earlier, Pb is boiling at 1750 °C. Fumes are from burning resin or rosin. Not healthy, but not tin nor lead nor silver.

 

But handling may cause the solder to reach your body. Sweaty, slightly acidic hands do love different chemicals. I hate many greases and oils because they travel through the skin to circulation, i.e. everywhere to the body - and gloves are not always an option.

 

I was working with electronics earlier. Lead was not an issue, otherwise there would have been tests. But those involved with radioactive materials had to go through various tests few times a year.

  • Like 1
Link to comment
Share on other sites

The other issue with lead is what will happen to the device at end-of-life. If it stops working and you are still around then hopefully you will be responsible enough to ensure it’s disposed of properly, though that may become harder to do as commercial electronics become exclusively lead-free. If you’re gone, how do you know it’ll be looked after correctly rather than ending up polluting the environment for future generations? I know the quantity of material involved is tiny but it still seems to me like the right thing not to use it. 
 

I don’t find working with lead free solder that hard as long as you have a temperature controlled iron and the right size bit for each job. Obviously that does involve some extra expense though. 

Link to comment
Share on other sites

You know everyone says “check every part” 

 

and you think “I should check every part” 

but don’t 

 

and sometimes you get away with it

 

and sometimes the 2m resistors turn out to have been labeled wrong and are 2k

so that doesn’t work 

 

 

there’s a lesson there for us all, which lets be honest, we probably won’t all do! 

Link to comment
Share on other sites

On bigger build you have to. I built a 303 replica and got a resistor value wrong in the first section (the power supply - you build each section and test) which caused me more heartache than I can really admit. There is a vintage synth wizard down the road from me - I took it to him and he found it within minutes. I felt very humble at that moment. After that I checked every resistor value with the digital meter I have. Saved me any futher angst! And his minimum bench fee...

I feel your pain!

Link to comment
Share on other sites

On 31/12/2022 at 23:45, tauzero said:

 

According to https://weldingmastermind.com/can-you-get-lead-poisoning-from-soldering-heres-the-truth/ there's both lead dust and lead contamination of fumes.

 

I must admit to liking the smell of resin fumes.

 

Clearly a site with a deep understanding of the process:

 

Quote

During the soldering process, the solder is heated to approximately 600 degrees Fahrenheit, which causes it to melt. It is then poured into the joint between the two components that need to be bonded.

 

Link to comment
Share on other sites

2 hours ago, bloke_zero said:

On bigger build you have to. I built a 303 replica and got a resistor value wrong in the first section (the power supply - you build each section and test) which caused me more heartache than I can really admit. There is a vintage synth wizard down the road from me - I took it to him and he found it within minutes. I felt very humble at that moment. After that I checked every resistor value with the digital meter I have. Saved me any futher angst! And his minimum bench fee...

I feel your pain!

 

Were the bands on the resistor the wrong colours?

Link to comment
Share on other sites

I must admit in all my years of working both as hobby electronics and later as an electronic engineer (which I guess counts for about 20+), I have been liucky enough to never has found a resistor with the wrong values on it. Some are harder to see than others, but never wrong.

Capacitors on the other hand...

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...