Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Finished Pics! Andyjr1515 meets his Nemesis?


Andyjr1515

Recommended Posts

5 minutes ago, Andyjr1515 said:

Well that's crazy! xD

I literally bing'd 'single cut bass rear view' to find a picture to show people what I was talking about!

The really wierd thing was that three of the other photos were of Kert's camphor single cut - one of my own builds  :)

Things come full circle a lot quicker thanks to the internet.
There's still not a lot of bolt-on single cut basses out there, compared the the more usual set-neck or neck-through anyway, and I believe that Shuker was the first Jon had made, and certainly one of the earliest ones here in the UK, so it's probably engrained into the search engines now.

Eude

  • Like 2
Link to comment
Share on other sites

2 minutes ago, Bigwan said:

Are you allowed to cheat and modify the neck? My initial thought would be to glue more meat around the bass side of the butt end of the neck to get you closer to the bolt on arrangement of your first picture. Don't know what that would do to your truss rod operation though....

At the moment I'm not planning modding the neck.  If I was, then yes, I think something on those lines :)

My thought at the moment is to shape the body a little bit like @eude 's erstwhile Shuker and carve a cradle for the neck to slot into. 

Do I have proven skills to be able to do that?  No - not yet xD

Could this end badly?  Please refer to the title ;)

  • Haha 2
Link to comment
Share on other sites

1 minute ago, Andyjr1515 said:

At the moment I'm not planning modding the neck.  If I was, then yes, I think something on those lines :)

My thought at the moment is to shape the body a little bit like @eude 's erstwhile Shuker and carve a cradle for the neck to slot into. 

Do I have proven skills to be able to do that?  No - not yet xD

Could this end badly?  Please refer to the title ;)

If it comes to modding the neck, I guess anything you do could rather be conveniently hidden in the single cut neck neck joint :) 

  • Like 1
Link to comment
Share on other sites

2 hours ago, Andyjr1515 said:

At the moment I'm not planning modding the neck.  If I was, then yes, I think something on those lines :)

My thought at the moment is to shape the body a little bit like @eude 's erstwhile Shuker and carve a cradle for the neck to slot into. 

Do I have proven skills to be able to do that?  No - not yet xD

Could this end badly?  Please refer to the title ;)

I have every confidence in you Andy.

I would imagine you'd work the final shape of the cradle much as they used to with white metal bearings; by hand with a scraper to take off the witness marks left from rubbing the mating surfaces together with Engineer's Blue.  Just don't use any Engineer's Blue in this process as it is a bugger to clean off of metal, let alone timber!  Joking aside, I'd think that you'd have to have a little movement in the joint to allow you to identify the high spots.  Rubbing the pieces together with no highlighting agent should work okay if you can see the shiny spots where contact is made.

Interesting problem.

  • Like 2
Link to comment
Share on other sites

53 minutes ago, SpondonBassed said:

I have every confidence in you Andy.

I would imagine you'd work the final shape of the cradle much as they used to with white metal bearings; by hand with a scraper to take off the witness marks left from rubbing the mating surfaces together with Engineer's Blue.  Just don't use any Engineer's Blue in this process as it is a bugger to clean off of metal, let alone timber!  Joking aside, I'd think that you'd have to have a little movement in the joint to allow you to identify the high spots.  Rubbing the pieces together with no highlighting agent should work okay if you can see the shiny spots where contact is made.

Interesting problem.

Mount the body at an angle on the table and use the horizontal arbour (sic) with a fly cutter to cut the curve...

  • Like 2
Link to comment
Share on other sites

1 hour ago, SpondonBassed said:

I have every confidence in you Andy.

I would imagine you'd work the final shape of the cradle much as they used to with white metal bearings; by hand with a scraper to take off the witness marks left from rubbing the mating surfaces together with Engineer's Blue.  Just don't use any Engineer's Blue in this process as it is a bugger to clean off of metal, let alone timber!  Joking aside, I'd think that you'd have to have a little movement in the joint to allow you to identify the high spots.  Rubbing the pieces together with no highlighting agent should work okay if you can see the shiny spots where contact is made.

Interesting problem.

 

52 minutes ago, Si600 said:

Mount the body at an angle on the table and use the horizontal arbour (sic) with a fly cutter to cut the curve...

 

Probably a bit of both ;)

I'm going to draw it full size over the next couple of days but I'm pretty sure the bottom of the neck pocket will end up at the level of the back wood.  If so, the only thing I have to fillet is the top wood, starting from a rectangular 'neck pocket' shaped hole.

If so, a bullnose router bit or similar isn't a bad idea to rough it out @Si600 , and remembering the apprentice school engineer blue fitting techniques- but using blackboard chalk instesd of blue and scrapers to fine finish it all off, @SpondonBassed ....

So I might have to retitle to:

"Andyjr1515, Si600 & Spondonbassed meet their Nemesis?"    xD

Edited by Andyjr1515
  • Like 1
  • Haha 2
Link to comment
Share on other sites

1 hour ago, Andyjr1515 said:

If so, the only thing I have to fillet is the top wood, starting from a rectangular 'neck pocket' shaped hole.

If so, a bullnose router bit or similar isn't a bad idea to rough it out @Si600 , and remembering the apprentice school engineer blue fitting techniques- but using blackboard chalk instesd of blue and scrapers to fine finish it all off, @SpondonBassed ....

 

With weird 1:1 panto-graph arrangement to follow the existing neck profile and repeat it in reverse on the body?

  • Haha 1
Link to comment
Share on other sites

1 hour ago, BassTool said:

I hope you managed to fit in a cup of tea between finishing the SwiftLite 2 and starting this one Andy 😲

Here we go again....😎

Following :i-m_so_happy:

:lol:

Actually, just put the final touches on the Swift Lite 2 a moment ago so close but no cigar cup of tea! ;)

  • Like 1
  • Haha 1
Link to comment
Share on other sites

2 hours ago, Si600 said:

With weird 1:1 panto-graph arrangement to follow the existing neck profile and repeat it in reverse on the body?

No                                                                                                  Next!

 

:lol:

 

 

Link to comment
Share on other sites

21 minutes ago, Fishman said:

blimey! never seen one before, which is surprising considering the amount of time I spend on here, obsessing, gassing and generally wasting time 😀

Fender seem to have kept them a closely guarded secret.  Apart from the ergo's (fixed by Andy's re-body), it was the best passive bass I'd ever played.  Now it's the best in every respect.  But enough of my bass - back to fleabag's 😉

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...