ordep Posted Wednesday at 13:53 Posted Wednesday at 13:53 (edited) sharing my processors on a pedalstand for both thick and thin strings. The tap tempo on top of the expression pedal is to toggle between EXP1 and EXP2 Edited Wednesday at 14:00 by ordep 3 Quote
Frank Blank Posted Wednesday at 14:01 Posted Wednesday at 14:01 8 minutes ago, ordep said: ...sharing my processors on a pedalstand for both thick and thin strings. I'm going crazy from digital processos being called processors! Quote
neepheid Posted Wednesday at 14:19 Posted Wednesday at 14:19 1 hour ago, Obra said: This is a pedalboard...some pedals connected one to another. I'm going crazy from digital processos being called pedalboards. Doesn't take much to make you crazy, does it? You might want to get that checked out. 1 Quote
ped Posted Wednesday at 14:33 Posted Wednesday at 14:33 29 minutes ago, ordep said: sharing my processors on a pedalstand for both thick and thin strings. The tap tempo on top of the expression pedal is to toggle between EXP1 and EXP2 I rather like your red IEC cable Quote
ordep Posted Wednesday at 15:37 Posted Wednesday at 15:37 1 hour ago, ped said: I rather like your red IEC cable Then here is a picture of my modular red IEC cable setup that I interconnect depending on the length that I need. (I have about 4 of these) 2 Quote
BabyBlueSound Posted Wednesday at 15:39 Posted Wednesday at 15:39 2 hours ago, Obra said: This is a pedalboard...some pedals connected one to another. I'm going crazy from digital processos being called pedalboards. That C4 there is a processor tho 🙃 1 Quote
MrDinsdale Posted Wednesday at 16:12 Posted Wednesday at 16:12 I'm still flip-flopping between a pedalboard and a processor-stand/pedalboard fusion. Both sound largely the same, both have their own perks. I do need to pick which I wanna keep though and sell the other, the shelf of shame is getting pretty full! 1 Quote
stewblack Posted Wednesday at 16:28 Posted Wednesday at 16:28 49 minutes ago, ordep said: Then here is a picture of my modular red IEC cable setup that I interconnect depending on the length that I need. (I have about 4 of these) I like the plug very much #cableenvy 1 Quote
stewblack Posted Wednesday at 16:28 Posted Wednesday at 16:28 48 minutes ago, BabyBlueSound said: That C4 there is a processor tho 🙃 Sshh. He likes my board 1 1 Quote
Obra Posted Wednesday at 16:32 Posted Wednesday at 16:32 52 minutes ago, BabyBlueSound said: That C4 there is a processor tho 🙃 Okay, now kill me for my typo Quote
stewblack Posted Wednesday at 16:35 Posted Wednesday at 16:35 2 minutes ago, Obra said: Okay, now kill me for my typo Hey I knew what you meant, there is a difference. 1 Quote
ordep Posted Thursday at 10:13 Posted Thursday at 10:13 updated big board photo. MK2 octabvre and HX stomp back, and added the EWS stormy for another drive flavor. 10 Quote
Chadu25 Posted Thursday at 10:41 Posted Thursday at 10:41 Going small this weekend while waiting for my Anagram which has been delayed 5 Quote
nilorius Posted Thursday at 10:53 Posted Thursday at 10:53 I replaced EHM big muff with Ampeg scrambler. 7 Quote
Jack Posted Thursday at 21:02 Posted Thursday at 21:02 On 14/05/2025 at 13:51, Obra said: I'm sorry, but this is not a pedalboard. This is a processor on a pedal stand. I was tempted to pile up loads of pedals on top of the qc and take a photo. I mean, fair enough though. 1 Quote
BabyBlueSound Posted Friday at 12:14 Posted Friday at 12:14 I mean I sort of get @ordep's point too. But if it's on a board... and you can step on it... (like on an actual switch, I know it's possible to just step on anything 😀)... How about the switchless, always on stuff on boards? They're not really pedals, they're just boxes after all 🙃 1 Quote
LukeFRC Posted Friday at 12:35 Posted Friday at 12:35 is this a pedalboard? Asking for a friend... 2 5 Quote
BigBassBob Posted Friday at 13:36 Posted Friday at 13:36 (edited) This is my board I use for a pop punk tribute I play with. The Phat Phuk B gets swapped out for a chorus or octave when playing with other groups. Then I have a synth board for fun which I run before the main one and a board for bi-amp and pitch shifting nonsense. Edited Friday at 13:38 by BigBassBob 4 Quote
Pea Turgh Posted Friday at 13:51 Posted Friday at 13:51 1 hour ago, LukeFRC said: is this a pedalboard? Asking for a friend... That’s a deposit for a house 4 Quote
rwillett Posted Friday at 14:03 Posted Friday at 14:03 25 minutes ago, BigBassBob said: This is my board I use for a pop punk tribute I play with. The Phat Phuk B gets swapped out for a chorus or octave when playing with other groups. Then I have a synth board for fun which I run before the main one and a board for bi-amp and pitch shifting nonsense. So what's the collective noun for a number of pedal boards? I'll start with "A thrash of pedalboards" 1 Quote
BigBassBob Posted Friday at 14:11 Posted Friday at 14:11 7 minutes ago, rwillett said: So what's the collective noun for a number of pedal boards? I'll start with "A thrash of pedalboards" I also have a looping board and a dedicated guitar board... so 5 in total ignoring the three drawers of pedals I have in my office. No, I don't have a problem Quote
Paddy777 Posted Friday at 14:39 Posted Friday at 14:39 35 minutes ago, rwillett said: So what's the collective noun for a number of pedal boards? I'll start with "A thrash of pedalboards" A ‘money pit’ of pedalboards 😭 It never fkn stops haha 1 4 Quote
jimbobothy Posted 5 hours ago Posted 5 hours ago (edited) A bit of a departure for me using a Rockboard, I found it much harder than my usual Pedaltrain builds (staggered cut outs really don’t help with uniform dual lock placement!) Edited 4 hours ago by jimbobothy … less waffle and fewer photos! 3 Quote
Obra Posted 4 hours ago Posted 4 hours ago On 16/05/2025 at 14:35, LukeFRC said: is this a pedalboard? Asking for a friend... Jokes aside, this is my current setup 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.