Fisheth Posted November 7, 2016 Share Posted November 7, 2016 [quote name='Woodinblack' timestamp='1478467037' post='3169277'] Can't be long now. Tell you, the wait after the sofa shot seems long too as you are almost there! [/quote] Yeah, I hope it doesn't get delayed like my first one did! I don't mind though, looking forward to it! Quote Link to comment Share on other sites More sharing options...
scrumpymike Posted November 8, 2016 Share Posted November 8, 2016 Just had a look at the 'Special Offers' section on the PP website. There's a lot of lovely basses on there at bargain prices as low as Euro550 for an ex-demo Pike 4p. Luckily for me (i.e. for my bank balance and marriage), there's no short-scale stuff!! Quote Link to comment Share on other sites More sharing options...
ezbass Posted November 8, 2016 Share Posted November 8, 2016 [quote name='scrumpymike' timestamp='1478598336' post='3170103'] Just had a look at the 'Special Offers' section on the PP website. There's a lot of lovely basses on there at bargain prices as low as Euro550 for an ex-demo Pike 4p. Luckily for me (i.e. for my bank balance and marriage), there's no short-scale stuff!! [/quote]There are some Mesinger guitar bargains too, a 'Flying V' for €550 IIRC. A mental price for a hand made axe and given the current quality of Gibson guitars, a double bargain. Quote Link to comment Share on other sites More sharing options...
scrumpymike Posted November 8, 2016 Share Posted November 8, 2016 Even at the current exchange rate, these are incredible bargains. Quote Link to comment Share on other sites More sharing options...
Fisheth Posted November 13, 2016 Share Posted November 13, 2016 Been about 12 weeks, looking forward to seeing that Sofa shot! Quote Link to comment Share on other sites More sharing options...
shemeckfrac Posted November 14, 2016 Share Posted November 14, 2016 (edited) Couldn't resist helping myself to the red burst Jake P+JJ, even though I already had the gold finish custom P+JJ. Comparing the two I must say the custom one (gold) sounds a bit more organic thanks to the chambered body (extra resonance) and the ultralight machineheads make the neck balance better. This is the lightest precision I ever played. I've also changed the silver knobs and pickguard screws to black, which in my opinion looks better. The red-burst's sound is a bit more compressed (which is not necessary bad thing) and in my opinion looks stunning. No compromise on build quality in ether one. Edited November 14, 2016 by shemeckfrac Quote Link to comment Share on other sites More sharing options...
scrumpymike Posted November 14, 2016 Share Posted November 14, 2016 Very nice pair of Jakes you've got there. How much weight does the chambering save? Quote Link to comment Share on other sites More sharing options...
pierreganseman Posted November 15, 2016 Share Posted November 15, 2016 [quote name='scrumpymike' timestamp='1479142476' post='3174283'] Very nice pair of Jakes you've got there. How much weight does the chambering save? [/quote] Chambered J or P style from Adrian are usually around 3,5 kilo ... anywhere between 3,3 to 3,7 ... whatever that is in your things lol. cheers Quote Link to comment Share on other sites More sharing options...
scrumpymike Posted November 15, 2016 Share Posted November 15, 2016 [quote name='pierreganseman' timestamp='1479197662' post='3174592'] Chambered J or P style from Adrian are usually around 3,5 kilo ... anywhere between 3,3 to 3,7 ... whatever that is in your things lol. cheers [/quote] Thanks for the info. Quote Link to comment Share on other sites More sharing options...
pierreganseman Posted November 15, 2016 Share Posted November 15, 2016 [quote name='scrumpymike' timestamp='1479200653' post='3174624'] Thanks for the info. [/quote] my personal none chambered Alder Body P bass is 4,1 kilo Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted November 15, 2016 Share Posted November 15, 2016 Both of mine are chambered, and weigh around 7.2lbs. Insane. Quote Link to comment Share on other sites More sharing options...
scrumpymike Posted November 15, 2016 Share Posted November 15, 2016 OK, so I've had a flash of inspiration for a M custom that would be just perfect for me - don't know why I've only just thought of it. My absolute favourite bass is my Fender Rascal, but it's regrettably up for sale being just too heavy for long sets with my dodgy neck/shoulder. What I love about the Rascal is the unique pup/control configuration using 3 'lipstick' pups, a Strat-style 5-position slide selector switch, and a stacked tone pot. With the stack knob down your switching options are: 1) neck pup; 2) neck + mid; 3) mid; 4) mid + bridge; 5) bridge. Pull on the knob (!?) and the first 2 switch positions change to neck + bridge, and all 3 pups. I think this set-up is brilliant as it's quick and intuitive and gives you instant access to a whole range of different sounds without having to fiddle with tone and vol pot's. OK, so the idea is to ask Adrian to quote me for a s-s build based on the Elwood C with the same or equivalent pups/controls as the Rascal and lightweight construction around 3.5kg. Communicating with Adrian in English can be a bit tricky so I want to gather a bit more info first. Can anybody give me the correct generic description of the pups, switches etc Fender use on the Rascal and are the Fender or equivalent items readily available off the shelf? Maybe I'm wrong, but I'm guessing these things are not just picked from the Strat parts bin. Final question for pierreganseman: do you think Adrian would take this on? Quote Link to comment Share on other sites More sharing options...
shemeckfrac Posted November 15, 2016 Share Posted November 15, 2016 [quote name='scrumpymike' timestamp='1479142476' post='3174283'] Very nice pair of Jakes you've got there. How much weight does the chambering save? [/quote] The combined weight save (ultralight machineheads + chambered body) is no more then 0.5kg but every little counts I suppose Quote Link to comment Share on other sites More sharing options...
pierreganseman Posted November 15, 2016 Share Posted November 15, 2016 [quote name='scrumpymike' timestamp='1479203420' post='3174657'] OK, so I've had a flash of inspiration for a M custom that would be just perfect for me - don't know why I've only just thought of it. My absolute favourite bass is my Fender Rascal, but it's regrettably up for sale being just too heavy for long sets with my dodgy neck/shoulder. What I love about the Rascal is the unique pup/control configuration using 3 'lipstick' pups, a Strat-style 5-position slide selector switch, and a stacked tone pot. With the stack knob down your switching options are: 1) neck pup; 2) neck + mid; 3) mid; 4) mid + bridge; 5) bridge. Pull on the knob (!?) and the first 2 switch positions change to neck + bridge, and all 3 pups. I think this set-up is brilliant as it's quick and intuitive and gives you instant access to a whole range of different sounds without having to fiddle with tone and vol pot's. OK, so the idea is to ask Adrian to quote me for a s-s build based on the Elwood C with the same or equivalent pups/controls as the Rascal and lightweight construction around 3.5kg. Communicating with Adrian in English can be a bit tricky so I want to gather a bit more info first. Can anybody give me the correct generic description of the pups, switches etc Fender use on the Rascal and are the Fender or equivalent items readily available off the shelf? Maybe I'm wrong, but I'm guessing these things are not just picked from the Strat parts bin. Final question for pierreganseman: do you think Adrian would take this on? [/quote] waaaaw :-) ! I would make VERY clear what you want , as you've mentioned while he manages to get his point accross , his english is still kinda "broken" here and there. So make very crystal clear .... that's the main thing i would say. As for the rest , i suppose so yes ! lol , i've seen some of his basses with 3 pickups out there , so why not.... but in the end , i don't know... the only thing he told me he wouldn't do is custom shape... ever ... all the rest he answered "no problem" Quote Link to comment Share on other sites More sharing options...
scrumpymike Posted November 15, 2016 Share Posted November 15, 2016 Thanks p'g'man - that's what I thought/hoped you would say. At least I now know he has done triple-pup versions. Ideally I would like the lipstick pups (they look/sound so cool) but, if that wasn't possible, I would accept his nearest equivalent stock pup - which only leaves the 5-switch electrics as potentially non-M-standard. Quote Link to comment Share on other sites More sharing options...
Fisheth Posted November 15, 2016 Share Posted November 15, 2016 Welp, took the Jake to a practice for the first time in ages. Louder and a lot more rounded than my Fender... Going back and forth between them, I prefer this one for live use certainly! Both phenomenal basses though. Quote Link to comment Share on other sites More sharing options...
Bearfist Posted November 16, 2016 Share Posted November 16, 2016 Just placed an order with Adrian for my first Maruszczyk, what an absolute gent to deal with. 32 scale active Jake with Delano P and MM pickups heading my way in a few months.... Quote Link to comment Share on other sites More sharing options...
pierreganseman Posted November 16, 2016 Share Posted November 16, 2016 [quote name='Bearfist' timestamp='1479286893' post='3175265'] Just placed an order with Adrian for my first Maruszczyk, what an absolute gent to deal with. 32 scale active Jake with Delano P and MM pickups heading my way in a few months.... [/quote] indeed , one of the nicest guy i've met in this biz.... Quote Link to comment Share on other sites More sharing options...
Fisheth Posted November 16, 2016 Share Posted November 16, 2016 (edited) I've got nothing except praise for Adrian. He emailed me at 11PM GMT to tell me that my Jake was ready also, very good guy to deal with. Edited November 16, 2016 by Fisheth Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted November 16, 2016 Share Posted November 16, 2016 ^^^ Agreed - top chap. The mind boggles as to how busy he must be at any given time. Quote Link to comment Share on other sites More sharing options...
pierreganseman Posted November 16, 2016 Share Posted November 16, 2016 [quote name='wateroftyne' timestamp='1479304620' post='3175461'] ^^^ Agreed - top chap. The mind boggles as to how busy he must be at any given time. [/quote] answer is he never really stops .... when its not X its Y .... i regularly get shipments from him, and shipping label is always created at dumb time like 1 am or 5.30 ... 11PM ... or whatever.... Quote Link to comment Share on other sites More sharing options...
peety Posted November 18, 2016 Share Posted November 18, 2016 Just got e mail with sofa shot at work so will post later safe to say it's exceeded expectations money transferred so the delivery wait begins Quote Link to comment Share on other sites More sharing options...
Fisheth Posted November 18, 2016 Share Posted November 18, 2016 Still waiting on mine. Hope it's a good looking bass, but knowing Adrian it will be. Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted November 18, 2016 Share Posted November 18, 2016 Sounds like a lot of new ones coming in! I can't get over how good mine is, I really like it. It plays well, it sounds brilliant Quote Link to comment Share on other sites More sharing options...
bubinga5 Posted November 19, 2016 Share Posted November 19, 2016 I played the Elwood 5 Jazz last night. I may withdraw it from the BC for sale/trade section. It really is fantastic Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.