KiOgon

Paul ordered a P loom, great comms and instant payment = perfect transaction, a pleasure to deal with. Cheerz, John

Well I've never seen a more stupid way of fitting a cap.! If the long leg, earth side of that cap. ain't touching the 'unused' tag on the tone pot when fiited to the scratch plate, I don't know! Should have gone to specsavers

I have always cleaned new string before fitting, a cotton pad with surgical spirits gets all the crap off and leaves you with lovely clean shiny new strings 😊

So many of the above and Guns'n Roses Sweet child of mine

Jimmy Hendrix Little wing, solo especially, best played on guitar tune ever!

This is worth reading - https://www.notreble.com/buzz/2015/04/15/solving-bass-hum-problems-grounding-vs-shielding/

I have a Gherson Jazz bass, natural blond, I'm told they were only made in 1973. Long story short - '73 I went to that London determined to buy a Rick but every one I tried was NFG. When shown and played the Gherson I fell in love on the spot. It served me well for many gigs over many years.

Cheers @ped Maybe good for bigger items but no good for wiring kits 😒 or small parcels, bottom line is 34.99 euros, so not for 'low value' items. John

Same applies if any thing touches the shielding paint.

Any P pup will do, it's the fingers that matter 😎

A PMR acros the power swich will sort it, for example: https://www.ebay.co.uk/itm/1x-RIFA-Kondensator-100n-100R-X2-250V-SH-PMR209-RC-UNIT-0-1-F-uF-nF-C69k/264043210759?_trkparms=aid%3D1110001%26algo%3DSPLICE.SIM%26ao%3D1%26asc%3D59623%26meid%3D275ba97cd71f4aa899873ac674304144%26pid%3D100010%26rk%3D6%26rkt%3D12%26sd%3D173895418110%26itm%3D264043210759%26pmt%3D0%26noa%3D1%26pg%3D2047675&_trksid=p2047675.c100010.m2109

Tried to watch - but once Kaz saw Victor Meldrew singing old PSB hits we had to turn it off 😍

That's about right y'know 😃

I made a P-bass loom for Neil, great comms, instant payment, perfect transaction, highly recommended. Cheerz, John

I made a complete Jazz VVT kit for Gavin, steaight drop in - ready to go😎 He's a real pleasure to deal with, great comms and instant payment, perfect transaction, highly recommended. Cheerz, John

Pretty sure I asked about this ages ago, not being able to edit PMs is a pain.

I made a Jazz VVT wiring kit for Mart, a real pleasure to deal with, great comms. instant payment, perfect transaction and another happy customer 😎 Cheerz, John

Does it come standard with the 'wheelchair' logo - for disabled bass players? 👍😎😉

That'll do nicely 👍

@DanOwens and @stevie Err - a 1.8A replacement takes 18 x more current than the original 0.1A, I'm not so sure the supply from your PA will be enough for that! I would predict some burnt out power supply components a likely occurence long term if not very short term. Of course a Panaflow 1.8A is going to give a much higher performance but - - - As @tauzero said: "I'd be inclined just to use the 80mm and 24V bits and disregard the power and current, as they're not consistent - just get something that takes under .2A or so."

Finally delivered 11:00 today. The scooter is perfect, only 11 miles on the clock, never even been charged from new and had 70% in the batteries 🤯 I love a bargain, it's actually for Kaz, she's thrilled to bits with it 👍 After CEO of company promised 09:00, I messaged him at 10:20, he replied the driver was on the way, he would contact him and let me know. Driver turned up at 11, all was good but what a shower of shyte Silver Sprint are. P1553D off that I can't leave feedback on their ebay account because after the initial enquiry and quotation via their advert, you are then directed to their website to fill in a order form. No trace of the deal on ebay, no feedback facility on their website, no mention of them on TrustPilot and only a unused out of date facebook page that I found so far. Shysters!