mybass

[quote name='deepbass5' timestamp='1327337132' post='1509553'] 2x18 has it, the crossover only allows the amp to see 4 ohms at any time. [/quote] Apologies as I'm not trying to interrupt the sale ( a very good price too for these). My understanding is that a crossover does not have anything to do with ohms, it simply 'filters' off the high end of the signal to another speaker so your bass bin cab ohm is still read as 4 ohms. (Why does it have an ohm rating in the first place?) The Hysis top cab is then also read as 4 ohms yes? This equals a 2 ohm load to any amplifier. Some Peavey power amps will go as low as 2 ohms but many amps only go to 4 ohms so care is needed.

[quote name='gareth' timestamp='1327256990' post='1508452'] Made in USA in 2003. Lake Placid Blue with dark rosewood board. Excellent condition. Vey light weight at 8lbs 15ozs on digital scales on a level flat solid floor. Looking to trade for other fender basses or even a sadowsky, lakland with either way as required. Please pm with trades Thanks [/quote] and these are very good recording basses too..........

[quote name='deepbass5' timestamp='1327160774' post='1507234'] I have a set of Peavey Hi-sis 1's (12" tops) 4 ohm. and two 15" BW hi-sis bass bins 4ohm with poles. passive system If you are not familiar your amp would see 4 ohms a side, you plug into the bass bins where the internal cross over is linked to the tops, from memory they cross over at 180 Hz. These are old now but in good working order, tops only used vocals, larger venues we added bins for guitar bass and drums. sorry no pictures available as these are currently in my local music shop, but will pull if interested. [size=5]£250 all in[/size] [/quote] The way I'm reading this...... your amp would see 2ohms per side? Do you mean EACH 12" cabinet is a 4 ohm cab and EACH sub cabinet is a 4 ohm cab? This would present each side of the amp reading 2x4 ohm cabs equals a 2 ohm load.best to check as many PA amps will not go down to 2 ohms per side.

[quote name='vmaxblues' timestamp='1326360947' post='1495851'] Hi guys, As I am heading over to the dark side and as I need to finance some guitar equipment I am moving on my beloved bass rig. It consists of: 2 no. Markbass 15 TRV traveller bass cabs with roqsolid rain covers. 1 no.Eden WT400 amp head un a flight case. This rig is absolutely awesome with punchy tone and warmth and very powerful. Prices are: Markbass cabs = £290 each Eden head = £395 Prefer collection, but courier can be arranged, and also a meet up perhaps if distance not too excessive All in excellent condition [/quote] Excellent cabs, together or match one with a 2x10 Traveller....great sounds.

[quote name='mybass' timestamp='1320938575' post='1433474'] [size=5]I have an immaculate Roland 5080 / 128 voice rackable keyboards unit. I bought it new and have only ever used it on one track in a studio[/size]. [size=5]It [/size]has never been used/travelled since. I'm told by my keyboard player that it is an incredible piece of audio kit, he has the earlier 3080. There are no expansion cards with it. [size=5]Bought about 8 years ago, (I think they were about £1800). All original manuals included. No original box I'm afraid. Pics show it powered on and with the start up windows. Very minor surface marks on the top and a very small scratch on the front, hardly noticeable. Asking a very reasonable £400 (compared to well used Ebay ones from the USA) with preference for collection from NE Hants or thereabouts...[/size] [size=5](I think the UK postage/insurance would be about £20/25 but this[/size] can reviewed on purchase. To be honest, the later this is taken by someone this week, the more difficult it will be for me to post due to my 'road' commitments this month). [size=5]I've had this for sale for a while but I now have very limited time to deal with it until 2012. I will be travelling to the Wolverhampton area and Leeds area this week on the 29th and 30th Nov. so if anyone from around there is a definite buyer I can bring it with me. It is AS NEW.[/size] [/quote] BUMP

[quote name='Zekragash' timestamp='1321907982' post='1444372'] Nice bass but not easy to figure out the sound of this fretless. A better "commercial" approach would have been to offer something to ear ... please take one minute to link your sound clip ! I'm actually in search of a fretless to complete my collection... [/quote] [quote name='mybass' timestamp='1319719349' post='1417677'] FRETLESS CUSTOM 4 STRING BASS…….. £750 … no case. (Was £850) Specifications:… Lightweight 6 lb 12 oz. SINGLE piece Swamp Ash body wood finished with eight coats of "Tru Oil". Three piece rock maple wood neck. 34" Scale. Nut width @ 1.5+ inches/almost 40mm. ( A little over a Jazz bass width)... 12th "fret" @ 2.1"/55mm. Neck depth: Nut … almost 1"/ 25mm …. 12th fret..almost 1 1/8th" 27mm. Ebony fingerboard @ 6.5mm middle thickness. Approx. compound radius of 10" nut end to 15". Fingerboard has had a coat of Yamaha Bore oil. Large 3mm side "black" abalone dots. Note..side position dots are where the fret(s) would have been. The 1st and 2nd octave positions have double dots to be played centre of these two dots. The neck is a bolt on design, joined by four recessed alan key head bolts that thread through the body into brass threaded inserts into neck heel wood. Maple neck and headstock rear finish is Danish oil. Headstock front finish is "Tru oil". Headstock rear has a Walnut veneer. Seymour Duncan "Active Jazz AJJ" pickups. (Single battery power quoted on SD site as approx. 1000 hours battery life). Tone and Volume controls for each pickup. Stereo barrel jack output, engages battery when the jack plug is inserted. Schaller black "3D" bridge used for string width, height and intonation setting. Currently approx. 19 mm string spacing. Schaller black machine heads. Currently strung with "Galli" nickel strings of 105/85/65/45 gauge. ( mp3 soundclip available, please PM me for it. Too difficult at present to load anything above 1.3Mb onto Basschat). [color=#0000ff](I have another fretless bass in UK Rippled Ash/same hardware etc. slight change in string height/neck to body setting). [/color][color=#ff0000]THIS ONE NOW SOLD.[/color] The bass was initially requested to be made for a shop selling new, custom and cheaper instruments. My custom built basses have usually sold from £1150-£1250. The instrument can be seen in NE Hants/Bordon/Farnham/Hindhead area. I play fretless bass as a pro player and have designed - built my own basses for many years. I have usually only built basses for other players on order. [/quote][quote name='mybass' timestamp='1319719349' post='1417677'] FRETLESS CUSTOM 4 STRING BASS…….. £750 … no case. (Was £850) Specifications:… Lightweight 6 lb 12 oz. SINGLE piece Swamp Ash body wood finished with eight coats of "Tru Oil". Three piece rock maple wood neck. 34" Scale. Nut width @ 1.5+ inches/almost 40mm. ( A little over a Jazz bass width)... 12th "fret" @ 2.1"/55mm. Neck depth: Nut … almost 1"/ 25mm …. 12th fret..almost 1 1/8th" 27mm. Ebony fingerboard @ 6.5mm middle thickness. Approx. compound radius of 10" nut end to 15". Fingerboard has had a coat of Yamaha Bore oil. Large 3mm side "black" abalone dots. Note..side position dots are where the fret(s) would have been. The 1st and 2nd octave positions have double dots to be played centre of these two dots. The neck is a bolt on design, joined by four recessed alan key head bolts that thread through the body into brass threaded inserts into neck heel wood. Maple neck and headstock rear finish is Danish oil. Headstock front finish is "Tru oil". Headstock rear has a Walnut veneer. Seymour Duncan "Active Jazz AJJ" pickups. (Single battery power quoted on SD site as approx. 1000 hours battery life). Tone and Volume controls for each pickup. Stereo barrel jack output, engages battery when the jack plug is inserted. Schaller black "3D" bridge used for string width, height and intonation setting. Currently approx. 19 mm string spacing. Schaller black machine heads. Currently strung with "Galli" nickel strings of 105/85/65/45 gauge. ( mp3 soundclip available, please PM me for it. Too difficult at present to load anything above 1.3Mb onto Basschat). [color=#0000ff](I have another fretless bass in UK Rippled Ash/same hardware etc. slight change in string height/neck to body setting). [/color][color=#ff0000]THIS ONE NOW SOLD.[/color] The bass was initially requested to be made for a shop selling new, custom and cheaper instruments. My custom built basses have usually sold from £1150-£1250. The instrument can be seen in NE Hants/Bordon/Farnham/Hindhead area. I play fretless bass as a pro player and have designed - built my own basses for many years. I have usually only built basses for other players on order. [/quote] BUMP

[quote name='BassBus' timestamp='1321910433' post='1444410'] Some people might then be a bit lazy about buy your bass. [/quote] please see previous reply to a newbie Zekragash......... I do try to and give as much info as possible. I can understand that any serious buyer would ike to know as much as possible. A soundclip is rarely added to any bass being sold. I have been pm'd for soundclips. Please pm me if you would like one.

[quote name='Zekragash' timestamp='1321907982' post='1444372'] Nice bass but not easy to figure out the sound of this fretless. A better "commercial" approach would have been to offer something to ear ... please take one minute to link your sound clip ! I'm actually in search of a fretless to complete my collection... [/quote] Er, you can get a soundclip from me........... "( mp3 soundclip available, please PM me for it. Too difficult at present to load anything above 1.3Mb onto Basschat). this is part of my posting. I, along with many others have had problems loading pics / mp3's onto Basschat. I think it is because the capacity to load any SINGLE pic/mp3 has to be well below the TOTAL capacity allowed for one posting. Of course, everyone should post an mp3 of the bass's sound they are selling as every bass sounds different. Maybe you have pm'd me, I'll have a look and then I can send an mp3 to you. It took me more than one minute to try and load the mp3, very frustrating. All praise to the chaps running the site but even they know many of us have had problems. I do of course presume that any serious potential buyer for a complete custom/hand made fretless bass would have pm'd me for further information.

[quote name='mybass' timestamp='1319719349' post='1417677'] FRETLESS CUSTOM 4 STRING BASS…….. £750 … no case. (Was £850) Specifications:… Lightweight 6 lb 12 oz. SINGLE piece Swamp Ash body wood finished with eight coats of "Tru Oil". Three piece rock maple wood neck. 34" Scale. Nut width @ 1.5+ inches/almost 40mm. ( A little over a Jazz bass width)... 12th "fret" @ 2.1"/55mm. Neck depth: Nut … almost 1"/ 25mm …. 12th fret..almost 1 1/8th" 27mm. Ebony fingerboard @ 6.5mm middle thickness. Approx. compound radius of 10" nut end to 15". Fingerboard has had a coat of Yamaha Bore oil. Large 3mm side "black" abalone dots. Note..side position dots are where the fret(s) would have been. The 1st and 2nd octave positions have double dots to be played centre of these two dots. The neck is a bolt on design, joined by four recessed alan key head bolts that thread through the body into brass threaded inserts into neck heel wood. Maple neck and headstock rear finish is Danish oil. Headstock front finish is "Tru oil". Headstock rear has a Walnut veneer. Seymour Duncan "Active Jazz AJJ" pickups. (Single battery power quoted on SD site as approx. 1000 hours battery life). Tone and Volume controls for each pickup. Stereo barrel jack output, engages battery when the jack plug is inserted. Schaller black "3D" bridge used for string width, height and intonation setting. Currently approx. 19 mm string spacing. Schaller black machine heads. Currently strung with "Galli" nickel strings of 105/85/65/45 gauge. ( mp3 soundclip available, please PM me for it. Too difficult at present to load anything above 1.3Mb onto Basschat). [color=#0000ff](I have another fretless bass in UK Rippled Ash/same hardware etc. slight change in string height/neck to body setting).[/color] The bass was initially requested to be made for a shop selling new, custom and cheaper instruments. My custom built basses have usually sold from £1150-£1250. The instrument can be seen in NE Hants/Bordon/Farnham/Hindhead area. I play fretless bass as a pro player and have designed - built my own basses for many years. I have usually only built basses for other players on order. [/quote] Bump

[quote name='mybass' timestamp='1320938575' post='1433474'] I have an immaculate Roland 5080 (rackable). I bought it, used it for one sound on a track and it has never been out the house or used / gigged since. A real waste of an incredible piece of keyboard kit. It is about 7/8 years young and I've seen the older ones still in use in studios because of the overall top sounds within. All manuals with it. No original box around I'm afraid but I'll look again. It has sat on the shelf in the spare room. Pics show it powered on etc. These appear to go at around £300-500 as studio or road used second hand, many of these though from the USA. Could I get £500 all in from a UK buyer? PM me for any more. It is AS NEW. [/quote] Bump

[quote name='mybass' timestamp='1320600207' post='1428826'] thanks Nick..the bass is selling below its 'RRP' price now! Part of a small contingent of basses made for another project which due to the shops situation, didn't really take off. [/quote] bump

[quote name='mybass' timestamp='1320938575' post='1433474'] I have an immaculate Roland 5080 (rackable). I bought it, used it for one sound on a track and it has never been out the house or used / gigged since. A real waste of an incredible piece of keyboard kit. It is about 7/8 years young and I've seen the older ones still in use in studios because of the overall top sounds within. All manuals with it. No original box around I'm afraid but I'll look again. It has sat on the shelf in the spare room. Pics show it powered on etc. These appear to go at around £300-500 as studio or road used second hand, many of these though from the USA. Could I get £500 all in from a UK buyer? PM me for any more. It is AS NEW. [/quote] Bump for offers

[size=5]I have an immaculate Roland 5080 / 128 voice rackable keyboards unit. I bought it new and have only ever used it on one track in a studio[/size]. [size=5]It [/size]has never been used/travelled since. I'm told by my keyboard player that it is an incredible piece of audio kit, he has the earlier 3080. There are no expansion cards with it. [size=5]Bought about 8 years ago, (I think they were about £1800). All original manuals included. No original box I'm afraid. Pics show it powered on and with the start up windows. Very minor surface marks on the top and a very small scratch on the front, hardly noticeable. Asking a very reasonable £400 (compared to well used Ebay ones from the USA) with preference for collection from NE Hants or thereabouts...[/size] [size=5](I think the UK postage/insurance would be about £20/25 but this[/size] can reviewed on purchase. To be honest, the later this is taken by someone this week, the more difficult it will be for me to post due to my 'road' commitments this month). [size=5]I've had this for sale for a while but I now have very limited time to deal with it until 2012. It is AS NEW.[/size]

[quote name='brick' timestamp='1320929500' post='1433266'] [sub]really need to get this sold as ive just went and bought something i shouldnt have bump now £275 including P&P[/sub] [/quote] These are really great single cabs with plenty of everything available and then a huge sound if you sit it on top of a 15" cab. I've heard bass players say they preferred this all black finish to the later yellow on black but aside from this talking point, I rate these as top in their field and for this price, what are you waiting for!

[quote name='Old Horse Murphy' timestamp='1320598462' post='1428793'] I have had dealings with Mr Stroud in the past and not only is he a superb Bass Player (I wish I had your CV Pete!) he's a really nice guy too. I wish I had the funds. This bass looks superb Cheers Nick [/quote] thanks Nick..the bass is selling below its 'RRP' price now! Part of a small contingent of basses made for another project which due to the shops situation, didn't really take off.

[quote name='BassBus' timestamp='1320598683' post='1428798'] Why not upload a sound clip to [url="http://soundcloud.com/dashboard"]http://soundcloud.com/dashboard[/url] then post the link on here. Beautiful bass. I love the combination of a black fingerboard and ash body. Pity I'm not in the market for a new bass. [/quote] Thanks Bassbus for your helpful thoughts but I'm a bit lazy, easier if any serious buyer pm'd me and then I can also add any more details.

[quote name='mybass' timestamp='1319719349' post='1417677'] FRETLESS CUSTOM 4 STRING BASS…….. £795 ovno … no case. (Was £850) Specifications:… Lightweight 6 lb 12 oz. SINGLE piece Swamp Ash body wood finished with eight coats of "Tru Oil". Three piece rock maple wood neck. 34" Scale. Nut width @ 1.5+ inches/almost 40mm. ( A little over a Jazz bass width)... 12th "fret" @ 2.1"/55mm. Neck depth: Nut … almost 1"/ 25mm …. 12th fret..almost 1 1/8th" 27mm. Ebony fingerboard @ 6.5mm middle thickness. Approx. compound radius of 10" nut end to 15". Fingerboard has had a coat of Yamaha Bore oil. Large 3mm side "black" abalone dots. Note..side position dots are where the fret(s) would have been. The 1st and 2nd octave positions have double dots to be played centre of these two dots. The neck is a bolt on design, joined by four recessed alan key head bolts that thread through the body into brass threaded inserts into neck heel wood. Maple neck and headstock rear finish is Danish oil. Headstock front finish is "Tru oil". Headstock rear has a Walnut veneer. Seymour Duncan "Active Jazz AJJ" pickups. (Single battery power quoted on SD site as approx. 1000 hours battery life). Tone and Volume controls for each pickup. Stereo barrel jack output, engages battery when the jack plug is inserted. Schaller black "3D" bridge used for string width, height and intonation setting. Currently approx. 19 mm string spacing. Schaller black machine heads. Currently strung with "Galli" nickel strings of 105/85/65/45 gauge. ( mp3 soundclip available, please PM me for it. Too difficult at present to load anything above 1.3Mb onto Basschat). [color=#0000ff](I have another fretless bass in UK Rippled Ash/same hardware etc. slight change in string height/neck to body setting).[/color] The bass was initially requested to be made for a shop selling new, custom and cheaper instruments. My custom built basses have usually sold from £1150-£1250. The instrument can be seen in NE Hants/Bordon/Farnham/Hindhead area. I play fretless bass as a pro player and have designed - built my own basses for many years. I have usually only built basses for other players on order. [/quote] BUMP for new price

[quote name='synaesthesia' timestamp='1320335781' post='1425497'] Hi Bought these to try and they are not for me. New price is about £130 with customs charge etc (USD$157 incl. Shipping + Customs charges) Selling here for £80. Bargain. 1 day old to me. Well built pickups, noiseless. Just not my sound. Prefer EMG. Please PM. --- [url="http://wildepickups.com/Bass_Pickups.html"]http://wildepickups....ss_Pickups.html[/url] [/quote] PM'd

[quote name='mybass' timestamp='1320348833' post='1425762'] bump [/quote] bump

[quote name='mybass' timestamp='1320078575' post='1422018'] I have a set of Redwood bookmatched facings for sale. Extremely nice looking once sanded n sealed. Each board measures: Length 23 & 3/4"... 650mm Wide 7 & 11/16" 196mm Thick .38" ... 9.6mm Asking £50 with post to be added. My post office told me about £4/5 postage UK but I'll have to re-check if that includes insurance though I seem to remember it should up to £50. These cost me originally USA $70 + about $30 post. pictures now be added after problems again loading. I pic is the actual wood for sale. The other two pics as to how redwood may look when clear finished.... the colour changing slightly with different light and angle. [/quote] bump

[quote name='brick' timestamp='1320242810' post='1424212'] This is one of the older style MB cabs and IMO is far more aesthetically pleasing than the more recent yellow and black monsters. This cab was bought on here from Mybass just under a month ago, dont really want to get rid of it particularly as it is a great sounding cab but as im using taxis a lot to get to gigs and ive recently hurt my back/ribs and feel that a 2nd Aguilar GS112 to pair with my NT might be more suited to my needs at the mo Here is a link to the orginal sale if Mybass doesnt object where you can find some pics [url="http://basschat.co.uk/topic/154056-sold-markbass-2x10-now-l300/page__hl__markbass__fromsearch__1"]http://basschat.co.u...__fromsearch__1[/url] Bought this for £300 + P&P and only used it on 2 gigs so selling for £300 including P&P [/quote] Pics are fine to use Andy, good luck.

I have a set of Redwood bookmatched facings for sale. Extremely nice looking once sanded n sealed. These originally cost me USA $70 + about $30/35 post. Each board measures: Length 23 & 3/4 inches... 650mm Wide 7 & 11/16 inches 196mm Thick .38 of an inch ... 9.6mm Asking £45 with postage to be added. My post office told me about £4/5 postage UK but I'll have to re-check if that includes insurance though I seem to remember it should do up to £50. I pic is the actual wood for sale. The other two pics as to how redwood on a current instrument looks part way through a finish in Tru oil.... the colour changing slightly with different light and angle.

[quote name='mybass' timestamp='1319719349' post='1417677'] FRETLESS CUSTOM 4 STRING BASS…….. £850 ovno … no case. Specifications:… Lightweight 6 lb 12 oz. SINGLE piece Swamp Ash body wood finished with eight coats of "Tru Oil". Three piece rock maple wood neck. 34" Scale. Nut width @ 1.5+ inches/almost 40mm. ( A little over a Jazz bass width)... 12th "fret" @ 2.1"/55mm. Neck depth: Nut … almost 1"/ 25mm …. 12th fret..almost 1 1/8th" 27mm. Ebony fingerboard @ 6.5mm middle thickness. Approx. compound radius of 10" nut end to 15". Fingerboard has had a coat of Yamaha Bore oil. Large 3mm side "black" abalone dots. Note..side position dots are where the fret(s) would have been. The 1st and 2nd octave positions have double dots to be played centre of these two dots. The neck is a bolt on design, joined by four recessed alan key head bolts that thread through the body into brass threaded inserts into neck heel wood. Maple neck and headstock rear finish is Danish oil. Headstock front finish is "Tru oil". Headstock rear has a Walnut veneer. Seymour Duncan "Active Jazz AJJ" pickups. (Single battery power quoted on SD site as approx. 1000 hours battery life). Tone and Volume controls for each pickup. Stereo barrel jack output, engages battery when the jack plug is inserted. Schaller black "3D" bridge used for string width, height and intonation setting. Currently approx. 19 mm string spacing. Schaller black machine heads. Currently strung with "Galli" nickel strings of 105/85/65/45 gauge. (I do have an mp3 soundclip but will not try to load it here, please PM me for it. Too difficult at present to load anything above 1.3Mb onto Basschat). (I have another fretless bass in UK Rippled Ash/same hardware etc slight change in string height/neck to body setting). The bass was initially requested to be made for a shop selling new, custom and cheaper instruments. My custom built basses have usually sold from £1150-£1250. The instrument can be seen in NE Hants/Bordon/Farnham/Hindhead area. I play fretless bass as a pro player and have designed - built my own basses for many years. I have usually only built basses for other players on order. [/quote] bump

FRETLESS CUSTOM 4 STRING BASS…….. £750 … no case. (Was £850) Specifications:… Lightweight 6 lb 12 oz. SINGLE piece Swamp Ash body wood finished with eight coats of "Tru Oil". Three piece rock maple wood neck. 34" Scale. Nut width @ 1.5+ inches/almost 40mm. ( A little over a Jazz bass width)... 12th "fret" @ 2.1"/55mm. Neck depth: Nut … almost 1"/ 25mm …. 12th fret..almost 1 1/8th" 27mm. Ebony fingerboard @ 6.5mm middle thickness. Approx. compound radius of 10" nut end to 15". Fingerboard has had a coat of Yamaha Bore oil. Large 3mm side "black" abalone dots. Note..side position dots are where the fret(s) would have been. The 1st and 2nd octave positions have double dots to be played centre of these two dots. The neck is a bolt on design, joined by four recessed alan key head bolts that thread through the body into brass threaded inserts into neck heel wood. Maple neck and headstock rear finish is Danish oil. Headstock front finish is "Tru oil". Headstock rear has a Walnut veneer. Seymour Duncan "Active Jazz AJJ" pickups. (Single battery power quoted on SD site as approx. 1000 hours battery life). Tone and Volume controls for each pickup. Stereo barrel jack output, engages battery when the jack plug is inserted. Schaller black "3D" bridge used for string width, height and intonation setting. Currently approx. 19 mm string spacing. Schaller black machine heads. Currently strung with "Galli" nickel strings of 105/85/65/45 gauge. ( mp3 soundclip available, please PM me for it. Too difficult at present to load anything above 1.3Mb onto Basschat). [color=#0000ff](I have another fretless bass in UK Rippled Ash/same hardware etc. slight change in string height/neck to body setting). [/color][color=#ff0000]THIS ONE NOW SOLD.[/color] The bass was initially requested to be made for a shop selling new, custom and cheaper instruments. My custom built basses have usually sold from £1150-£1250. The instrument can be seen in NE Hants/Bordon/Farnham/Hindhead area. I play fretless bass as a pro player and have designed - built my own basses for many years. I have usually only built basses for other players on order.