Jump to content
Why become a member? ×

Amp to flat


Paddy515

Recommended Posts

53 minutes ago, Beedster said:

 

Which means that you love it's baked in tone, which is why we choose the gear we choose. But it's not flat, if it was flat why would you love Handbox flat more than Ashdown or Ampeg flat? 

 

Flat isn't a baked-in tone. It's a flat frequency response. If you don't want a flat frequency response in an amp, what response do you want?

  • Like 1
Link to comment
Share on other sites

4 hours ago, stevie said:

 

Flat isn't a baked-in tone. It's a flat frequency response. If you don't want a flat frequency response in an amp, what response do you want?

 

That's the point some of us are trying to make. A truly flat frequency response is not achievable by any bass rig. What people perceive as flat - eq switched out of circuit or everything set at mid point/12 o' clock - is nothing of the kind. It's the baked in sound. The question above - why would you love Handbox flat more than Ashdown or Ampeg flat? - is spot on. There should be no difference between them if they were truly flat.

 

Anything short of a substantial PA will be 3db down (or more) at 50hz or so (which isn't even the fundamental frequency of the low E, let alone the B on a 5 string). Many bass rigs are running out of ideas at close to 100hz at any volume and that's not necessarily a bad thing. I've experimented with adding a sub to my bass rig. Not a cheap, one note sub, either (Fohhn XS30). Impressive at low volumes and on its own, but it quickly became mud city in a live situation. By the time I had it set to sound right, the sub was barely contributing anything.

 

What response do I want from an amp? One that gives me the sound I like at realistic volumes. I don't care what it looks like on an oscilloscope. I should imagine most players would want the same.

 

 

Edited by Dan Dare
  • Like 2
Link to comment
Share on other sites

Just now, wateroftyne said:

Or in my case, not. So… we’re back to horses for courses.

 

But let’s not forget the OP wants to know how to get a flat response from the EQ of their amp.

 

Ah, got you now, the baked in tone and EQ settings of the Walkabout didn't allow you to get the tone you wanted, even with everything theoretically flat. Yep, I found that with the whole range, M-Pulse 600, Venture, Big Block, Titan and Walkabout (I owned the whole bloody lot at one time or another). But is that about not doing flat per se? I know that I preferred the 'flat' or 'core' or 'baked-in' tone of the 400 and Buster ranges, but 

 

Re the OP getting a flat response, I'd ask why, is there some magic about something you 'know' to be technically a flat response that beats your ears and your brain's ability to identify the tone you want to hear? 

 

 

Link to comment
Share on other sites

10 hours ago, stevie said:

 

Flat isn't a baked-in tone. It's a flat frequency response. If you don't want a flat frequency response in an amp, what response do you want?


A good sound!

 

I think it’s always good to know what your amp sounds like ‘neutral’ so you can understand the gear better. Then when you add EQ you know whether you’re fighting to get away from the baked in tone or adding to a sound you already like.

  • Like 3
Link to comment
Share on other sites

6 hours ago, Dan Dare said:

 

I guess he answer is that he can't.

Suppose you just used a power amp either stereo or bridged with no eq section at all other than that built into your bass. Would that do the trick? Or do power amps have different sound colouration according to design, maker etc? I suppose they must. What are anyones thoughts on that. Would that help the op

Link to comment
Share on other sites

2 hours ago, Beedster said:

 

Ah, got you now, the baked in tone and EQ settings of the Walkabout didn't allow you to get the tone you wanted, even with everything theoretically flat. Yep, I found that with the whole range, M-Pulse 600, Venture, Big Block, Titan and Walkabout (I owned the whole bloody lot at one time or another). But is that about not doing flat per se? I know that I preferred the 'flat' or 'core' or 'baked-in' tone of the 400 and Buster ranges, but 

 

I guess my point could be this: Why do so many amp manufacturers bake in a scoop that you can't get rid of? Not everyone wants one. (see also: Sansamp)

  • Like 1
Link to comment
Share on other sites

4 minutes ago, Ralf1e said:

Suppose you just used a power amp either stereo or bridged with no eq section at all other than that built into your bass. Would that do the trick? Or do power amps have different sound colouration according to design, maker etc? I suppose they must. What are anyones thoughts on that. Would that help the op

My Ampeg SVT power amp had a glorious tone with a Precision (no preamp) where it sounded very far from flat to my ear, but less good with other basses. But then I’m biased 😀

  • Haha 1
Link to comment
Share on other sites

3 minutes ago, wateroftyne said:

 

I guess my point could be this: Why do so many amp manufacturers bake in a scoop that you can't get rid of? Not everyone wants one. (see also: Sansamp)


Yep, with all the hybrid Mesa amps when things got loud on stage a lot of the detail in the bass was lost, the para EQ helped as pushing low mids helped with the tone I wanted but the baked in tone of other amps works better for me, especially as having to push mids too far can leave the bass sounding a bit, well, unnatural. I always felt the mids on those units lack a bit of body, or dare I say heft 🤔

Link to comment
Share on other sites

9 hours ago, Dan Dare said:

 

That's the point some of us are trying to make. A truly flat frequency response is not achievable by any bass rig.

I take your point about bass rigs, but the original question was not about bass rigs but a bass amp. There are plenty of bass guitar amps with a flat frequency response. If you check out the technical reviews at Bass Gear Magazine, you'll find them. From memory, the Markbass LMIII is flat with the controls at 12 o'clock.

Knowing that your amp is flat response with the controls at noon doesn't stop you from using your tone controls to get the sound you're looking for. But at least you know what the starting point is.

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

This whole thread has confused me.  So far as I can see, or hear, surely it makes no difference where the starting point/flat is on the eq if you are then adjusting it to find the sound you want?  if you have to move it from 9 o'clock, noon or a quarter past 3 the end result will be the same because you are looking for a sound, not a position on a control knob.   And if you still can't find a sound you like, move on to a different amp.

 

Or have I missed the point?  Wouldn't be the first time :D 

  • Like 5
Link to comment
Share on other sites

1 hour ago, stevie said:

I take your point about bass rigs, but the original question was not about bass rigs but a bass amp. There are plenty of bass guitar amps with a flat frequency response. If you check out the technical reviews at Bass Gear Magazine, you'll find them. From memory, the Markbass LMIII is flat with the controls at 12 o'clock.

Knowing that your amp is flat response with the controls at noon doesn't stop you from using your tone controls to get the sound you're looking for. But at least you know what the starting point is.

 

True. However (and I'm not trying to be controversial), if no bass cab on earth is capable of reproducing that flat frequency response, it's a waste of time - and likely money - trying to achieve it.

 

I know you'll be aware of this with your experience, but flat between which frequencies? All amps are measured between set frequencies - specs will normally state "between X hz and Y khz". All amps incorporate some form of high pass filtering to remove sub bass, which soaks up power needlessly and can damage drive units. In the case of class D, there is low pass filtering to remove the unwanted high frequencies that class D generates.

 

I appreciate there's an element of taking it on trust that designers have done their homework and ensured that spurious frequencies/nasties have been taken care of. It's also the case that designers will resort to mid scoops and similar to give their offerings showroom appeal and impress the prospective buyer with how "clean" they sound. A someone who loves a P bass with flats, I'm no fan of that  Fortunately, it's usually pretty easy to hear it.

 

It's best to audition gear with ones ears, rather than a 'scope. Plenty of people waste time and money chasing the flat frequency response illusion. I know it's their money, but there are better things they could spend it on.

 

 

Link to comment
Share on other sites

Confession time, just in case you don't already know, I've been a user of multiple-effects for so long now that my bass rigs have really only been a way of making the sound coming out of the effects unit louder and nothing more. Anything in the way of additional colouration produced by the amp and speakers is, for me, completely unwanted. I've now bypassed this problem by going direct into the PA from my Helix and having an RCF powered cab to use for rehearsals and venues with big stages but small foldback systems. For the most recent gigs and rehearsals I've not even bothered with the RCF and TBH the sound in the practice room, on stage and FoH has benefitted massively from this, and has made the band much easier to mix.

 

The problem is that even if your amp has got you into the ball park of your preferred basic sound with the settings as close to "flat" as possible, there's no guarantee that you be able the EQ it into perfection. For this you are completely reliant upon the designer of the amp and yourself having the same tonal goals. That means that the EQ centre frequencies, Q and amount of cut and boost available all need to be right for you to be able to dial in the sound you want. If they are not, you'll never get there no matter how close the "flat" setting is.

Edited by BigRedX
Link to comment
Share on other sites

13 minutes ago, wateroftyne said:

Phew! I’m lucky that I can just plug my bass in, set the knobs to noon, and it sounds awesome 😄

Same here with the exception of gain and volume. They both go to about 9 o'clock.

Edited by Ralf1e
Link to comment
Share on other sites

26 minutes ago, chris_b said:

A flat sounding amp is like cooking without salt. Boring.

 

Find the amp that sounds good with the controls at 12 0'clock. Congratulations, you've found the amp for you.

 

Cooking without salt isn't boring. It's healthy. Add the salt to afterwards. Same with bass amps - season to taste.

 

The 'flat is sterile' mantra seems to be some kind of internet wisdom. There are lots of great sounding amps that are flat response with the controls at noon. They can't all be boring, surely?🙂

Edited by stevie
  • Like 1
Link to comment
Share on other sites

28 minutes ago, wateroftyne said:

Phew! I’m lucky that I can just plug my bass in, set the knobs to noon, and it sounds awesome 😄

 

You've simply found an amp that suits the sound in your head. 

 

However I know from your posts on here over the past 10+ years that you've been through quite a few rigs to get there.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...