Jump to content
Why become a member? ×

Post your pedal board - Basschat style!!


dudewheresmybass

Recommended Posts

[quote name='toneknob' timestamp='1391774799' post='2361117']
Still a work in progress, but aren't they all...



Out of shot: Diago Power Station, GigMan. To be added: MarkBass Super Synth, Sonuus Wahoo, a few others...
[/quote]

I'm liking the look of that. Just need to get it on a board now! :P

Also, by the looks of it, you have the coiled cable joining up the input and output of your "B" loop. Is that acting as a clean blend for the pedals in Loop "A"? If so, I'm pretty sure you don't need to actually run a cable between them - if you leave them both empty, it does the same job.

Unless of course I'm seeing it wrong, in which case carry on!

Paul

Edited by paulpirie8
Link to comment
Share on other sites

[quote name='paulpirie8' timestamp='1391778242' post='2361171']
I'm liking the look of that. Just need to get it on a board now! :P

Also, by the looks of it, you have the coiled cable joining up the input and output of your "B" loop. Is that acting as a clean blend for the pedals in Loop "A"? If so, I'm pretty sure you don't need to actually run a cable between them - if you leave them both empty, it does the same job.

Unless of course I'm seeing it wrong, in which case carry on!
[/quote]

Thanks Paul, yes that's exactly the intent of the curly lead - mix in a clean signal with the fuzz (Bushy Bison), wah (105Q) or env filter (the Ashdown). I've not given the LS-2's manual too close a read, but I was totally oblivious to what you've suggested, and if that's the case, then it makes a big difference to the cabling - thanks!

I got the idea from a Scott Devine video where he does the same, but the B loop has an octave pedal on it for added low end. I just assumed I could do kind of the same but without the pedal, just a cable from B "out" to B "in".

Link to comment
Share on other sites

I've just checked the manual at http://media.rolandus.com/manuals/LS-2_AD.pdf and I've clocked the top right diagram on the last page.

"A+B Mix -> Bypass Mode - You can mix effect and straight sounds to create a new effect", with the B channel empty. I'll give it a go and see what happens!

Link to comment
Share on other sites

Re-shuffled my main board:

[IMG]http://i59.tinypic.com/ekq8hd.jpg[/IMG]

Just felt like a bit of a change is all, nothing wrong with the old sounds. Although I did want to streamline power & tuning, so off came the T-Rex Juicy Lucy & TU-2, on goes Diago & TC. Just for some rotation, Fuzzrocious Dark Driving has replaced the COG 66 & because of the tuner/power change, had space to add the Mammoth clone I built :)
Oh also moved OC-2 to post dirt rather than pre, MUCH better!

Si

Link to comment
Share on other sites

[quote name='GazWills' timestamp='1391819814' post='2361802']
shouldn't we all be out boozing, who'd have thought midnight on a friday night was rush-hour for pedal updates! ;)
[/quote]

I started mine at 7pm. Including an hour break for dinner and The Last Leg I've only just finished.

Link to comment
Share on other sites

[quote name='GazWills' timestamp='1391819233' post='2361793']
nice and compact! so are you another 'OC-2 after dirt' advocate too?? I just don't get on with my OC-2 after o/d or fuzz, but it seems to be how most people run their boards!
[/quote]

I'm a bit of a convert, although it always depends what you want to achieve. For this band I rarely use OC-2 with dirt, but when I do, I want to retain the subby lows, not compress it out with the dirt pedals. So I get slightly 'duller' dirt with the OC-2 on, but sounds massive ;)

Si

Link to comment
Share on other sites

[quote name='Sibob' timestamp='1391820807' post='2361810']
I'm a bit of a convert, although it always depends what you want to achieve. For this band I rarely use OC-2 with dirt, but when I do, I want to retain the subby lows, not compress it out with the dirt pedals. So I get slightly 'duller' dirt with the OC-2 on, but sounds massive ;)

Si
[/quote]

surely you could squeeze another OC-2 on there for pre and post? Not like you're short of a few ;)

Link to comment
Share on other sites

Yeah it's cool, real grindy, and surpringly more gain in the mix than I thought. I thought I'd have to max the gain, but ended up winding it back a bit!

Need to re-jiggle the board as the Mammoth enclosure doesn't lend itself to being the 2nd row on the flat. Don't have enough clearance for a riser though with how I store/transport it.
Also think I need the tuner at the end of the chain as there seems to be some weirdness with the Polytune having a gain pedal after it!

Si

Link to comment
Share on other sites

  • 2 weeks later...
:hi: 2014: Pedal board (update).. won a pre loved 'SGT Pepper' pedal board at auction and it arrived yesterday. The chain is (right to left): -

Loop 1: OC2 > Auto Q | Loop 2: Shaker > Coroner > Vortex > Alter Ego > HOF | Output: Nova Dynamics > Polytune > Sonic Stomp | to amp..

** the polytune IS in an illogical position, and when I can stop noodling for five-minutes, I will try and sort it out! :)



..and here it is again, but someone turned out the lights :rolleyes:

Edited by SimonEdward
Link to comment
Share on other sites

[quote name='bakerster135' timestamp='1393180372' post='2377060']
Si, may be a bad comparison, but can you get sounds similar to an OCD/Demon from the 66 Knightfall?
[/quote]

They're all a very similar circuit, albeit with some component/architectural changes, and with the 66, some significant feature additions.
I'm currently running my 66 with Germaniums in channel 1 and LEDs in channel 2, the OCD circuit, same as the DEMON, is traditional MOSFET clipping.
As such, the answer is yes, the 66 can get OCD/DEMON-esque tones, but a lot more to boot!

Si

Link to comment
Share on other sites

[quote name='Sibob' timestamp='1393236563' post='2377547']
They're all a very similar circuit, albeit with some component/architectural changes, and with the 66, some significant feature additions.
I'm currently running my 66 with Germaniums in channel 1 and LEDs in channel 2, the OCD circuit, same as the DEMON, is traditional MOSFET clipping.
As such, the answer is yes, the 66 can get OCD/DEMON-esque tones, but a lot more to boot!

Si
[/quote]

Lovely stuff! I assume it can get pretty high gain as well? Have you been able to get anywhere near the scooped B3K-type tone from it as well at all?

Tom's stuff's already on my board, but I'm looking to cover as many dirt tones with as few dirt boxes as possible! ;)

Thanks Si :)

Link to comment
Share on other sites

[quote name='bakerster135' timestamp='1393237200' post='2377555']
Lovely stuff! I assume it can get pretty high gain as well? Have you been able to get anywhere near the scooped B3K-type tone from it as well at all?

Tom's stuff's already on my board, but I'm looking to cover as many dirt tones with as few dirt boxes as possible! ;)

Thanks Si :)
[/quote]

It's not mega high-gain, but then I don't need it to be. I simply needed 2 channels of gain in as smaller a footprint as possible.
Did you see the video demo I did for the 66 on youtube?
Not had it sounding like a B3K, but then I'm not a fan of the B3K/B7K tone, so that's fine by me ;)

Si

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...