-
Posts
893 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by Acebassmusic
-
I used to have a Fender Jazz FMT which was the best Fender build / finish I have seen. However my Mayones Jabba blows it away
-
Hi, My band is a four piece, based in Aberdeen, do functions and are possibly free for that night . Theres a link to the band website in my signature below. If you drop me a PM with details we'll see what we can do to help. Mike
-
I moved the rear strap button on my Thumb and it helped with reducing the neck dive.
-
-
I bought ours in 2012 from Band Banners (www.bandbanners.co.uk) for a 2m x 1m full colour fabric with eyelets for £174. They did a great job and it has been hard wearing and lasted us well. Depending on where you play some venues (especially theatres) require cloth drapes / banners to be fire retardant.
-
[size=5]Mindprint En-Voice MKII preamp that can be used either in the recording studio, PA live or as I have as a bass / guitar preamp before a power amp. Very light use and good condition.[/size] [size=5]Instrument input[/size] [size=5]Microphone input with 48 volts phantom power[/size] [size=5]Line input[/size] [size=5]Balanced Insert[/size] [size=5]Low-Cut 80Hz switchable[/size] [size=5]3-band parametric EQ[/size] [size=5]Tube compressor with adjustable Tube-Saturation[/size] [size=5]Attack/Release 8 presets switch-selectable[/size] [size=5]Low-cut sidechain-filter, 300Hz, 6dB/Octave[/size] [size=5]Balanced Line-Out XLR and Jack[/size] [size=5]Designed & Made in Germany[/size]
-
** SOLD ** Alembic F-1X Pre-amp
Acebassmusic replied to Acebassmusic's topic in Amps and Cabs For Sale
Thanks for the offer but not what I'm after. Also forum rules say that all offers are to be by PM only, Here's the link [url="http://basschat.co.uk/topic/183234-rule-changes-to-marketplace-36-hour-bumping-rule-trade-valuations-and-trade-offers/"]http://basschat.co.uk/topic/183234-rule-changes-to-marketplace-36-hour-bumping-rule-trade-valuations-and-trade-offers/[/url] -
** SOLD ** Alembic F-1X Pre-amp
Acebassmusic replied to Acebassmusic's topic in Amps and Cabs For Sale
[color=#282828][font=helvetica, arial, sans-serif]Offers and trades bump [/font][/color] [color=#282828][font=helvetica, arial, sans-serif] Main t[/font][/color][color=#282828][font=helvetica, arial, sans-serif]rades I'm interested in are Vanderkley, Fodera and[/font][/color][color=#282828][font=helvetica, arial, sans-serif] [/font][/color][color=#282828][font=helvetica, arial, sans-serif]Sei etc. but lets see what else ya' got [/font][/color][color=#282828][font=helvetica, arial, sans-serif] [/font][/color] -
For Sale or Trade is my Wood & Tronics Chronos Klimt 5 String bass. This bass features an stunning AAAAA quilted Poplar top with a unique Aqua/Black finish over an American Walnut body. There is a custom "W" logo on the 12th fret. The electronics are custom W&T / Kent Armstrong dual coils with a Nordstrand 2 band preamp with active / passive switching and passive tone control. There are a few small marks on the back of the bass and a match head sized ding on the bottom edge. The rest of the bass is in wonderful condition and would have cost over £3000 new. It comes with straplocks and hard case. Scale : 34 Inches Body : American Walnut Top Wood : AAAAA quilted Poplar with aqua/black tint. High gloss finish. (£500 option) Neck : 3-piece Maple/Ash Fretboard : Ebony Fretboard inlays etc: Custom 12th Fret inlay, side dots in brass Frets : 24 Mandolin size Pickups : Custom W&T / Kent Armstrong Dual Coil Electronics : Nordstrand 2 band preamp with active/passive switching and passive tone control. 2 switches : for Series / Single / Parallel coil selection on each pickup. Tuners : Hipshot Ultalight in black Bridge : ETS in Black Neck finish : Satin Weight is 9.5 lbs (4.3kg) String spacing (centre to centre of strings) is 18mm. Slight adjustment + and - available via the bridge saddles. [color=#282828][font=helvetica, arial, sans-serif]Offers and trades?[/font][/color][color=#282828][font=helvetica, arial, sans-serif] L[/font][/color][color=#282828][font=helvetica, arial, sans-serif]ets see what ya' got [/font][/color][color=#282828][font=helvetica, arial, sans-serif] [/font][/color]
-
[color=#282828][font=helvetica, arial, sans-serif]Here's my Alembic F-1X preamp for sale or trade. These superb bass pre-amps usually go for about $1600 new (£1000). [/font][/color][color=#282828][font=helvetica, arial, sans-serif]This unit is in full working order and excellent condition.[/font][/color] [b]Some Alembic F-1X info from their website:[/b] [color=#282828][font=helvetica, arial, sans-serif]The F-1X gives you a unity-gain impedance matching amplifier to feed guitar-level effects units. The effects return goes thru the tube gain stage and then to the tone controls. The signal from the tone controls is amplified and sent to the full-range output jack on the rear panel. This same signal is also fed to the crossover network. A transformer-isolated output feeds a 3-pin Cannon jack.[/font][/color] [b]Circuit detail[/b] [color=#282828][font=helvetica, arial, sans-serif]Two input jacks provide the same functionality as found on the F-2B preamplifier. The input is buffered by a cathode follower tube circuit, which is a unity-gain impedance matching amplifier to feed the guitar level effects loop. This gives minimum loading on the output signal from the guitar while driving the effects loop gear with the same signal voltage level as the guitar but at a lower impedance, to isolate cable and other loading effects from the guitar pickups.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]A solid state circuit restores the signal level after the volume control and provides impedance matching to drive the full range output jack on the rear panel. Additionally, it drives the crossover network. [/font][/color] [color=#282828][font=helvetica, arial, sans-serif]A transformer-isolated balanced output to an XLR type connector provides auxiliary Recording or PA feed. A switch selects the source to be the effects return (Pre) or the full range output (Post). [/font][/color] [color=#282828][font=helvetica, arial, sans-serif]The AC Line (Mains) connection is an IEC (computer-type) detachable cord. The supply voltage can be changed by moving jumpers inside the unit to operate from 100, 120, 220, and 240 volts for operation anywhere in the world.[/font][/color]
-
Radical proposal I know......but maybe (as well as the good advice above) get everyone else in the band to turn down a bit? It is a rehearsal after all
-
QSC PLX 3602 Power Amp - lightweight at 21lbs, but heavyweight with 3,600 watts at 4 ohms bridged! Normal 2 channel running gives 1100 watt at 4 ohm and 775 watt at 8 ohm. Still plenty of power to wake the neighbours! Very good condition with the light rack marks as its only been used to power my bands subs for a couple of years. RRP on this beast is £1,399 and I'm asking £580. Here's the QSC link: [url="http://www.qsc.com/live-sound/products/power-amplifiers/plx2-series/plx3602/"]http://www.qsc.com/l...series/plx3602/[/url]
-
SOLD Aphex 204 Aural Exciter with Big Bottom. Great piece of kit for PA, recording, single instruments (eg: bass rig) etc. It enhances certain frequencies so that you can both improve and get a bigger sound from your current equipment. For PA & bass rig this allows a much fuller sound without over stressing your speakers. Here's a couple of links for info: [url="http://www.soundoctor.com/aphex.htm"]http://www.soundoctor.com/aphex.htm[/url] [url="http://www.aphex.com/products/exciter"]http://www.aphex.com/products/exciter[/url]
-
Here are a couple of Turbosound TXD-115 PA subs. used and in good condition with the usual paint scrapes. Each sub is 1 x 15" 300w RMS with 600w program power handling at 8 ohm. I was using them as my main PA subs but have changed to Nexo's so these are now just taking up space. They come with the covers. Dimensions are 652mm x 465mm x 423mm (25.7" x 18.3" x 16.7") and 55 lbs each. The cabs have a built in crossover of 12dB / octave low pass at 150Hz. In the manual it says "The TXD-115 includes an internal low-pass crossover network which filters high frequency signals from the bass driver when used in conjunction with two-way enclosures enabling a full range system to be powered from a single amplifier channel without the need for external electronic crossovers." I'm looking for [s]£330[/s] [color=#FF0000][b]£300 including UK shipping.[/b][/color]
-
-
Just received a Mayones Jabba in excellent condition from Mikko. As others have said - great guy to deal with, constant communication, the deal was easy. Many thanks Mikko
-
Just did a great deal with Luke for a Shuker bass. Good comms, everything went well. Would definitely deal with Luke again. Bass is in excellent condition. Thanks Luke.
-
[quote name='CamdenRob' timestamp='1462538007' post='3043865'] That is a brilliant idea... how much are those? [/quote] Not sure on pricing as they were supplied by the company when I worked in the States. I'm sure a Google search will show up a UK equivalent. (Maybe I should have done this BEFORE I shipped a bass off today....eek!)
-
[quote name='alexclaber' timestamp='1460628435' post='3027335'] We considered putting both 'glass - fragile' and 'biohazard' stickers on our cabs so they'd be treated with care/fear! Unfortunately the risk of customs clearance issues precluded that... [/quote] I've used the following "ShockWatch" stickers on equipment I've sent with work. Doesn't stop the stuff being thrown about but you can check whether its been dropped before opening the package. [url="http://shockwatch.com/products/impact-and-tilt/impact-indicators/impact-and-tilt/impact-indicators/shockwatch-label"]http://shockwatch.com/products/impact-and-tilt/impact-indicators/impact-and-tilt/impact-indicators/shockwatch-label[/url]