All Activity

Hi, Mixed results with IEM's at the moment ...... Can get all the feeds to sound "good" in my ears ....... EXCEPT bass. Probably because I care more about how the bass sounds than just being able to hear and blend the rest of the band. The issue is a very "clanky" bass tone in the IEMs' but a great tone from the backline bass Rig, and the FOH. So, without IEMs the bass sounds good on Stage and FOH (as does the band). But, once the IEMs are in place the bass is completely different ... and not in a good way. The IEM's are Shure SE 215's via Xvive U4 wireless set. (I will get these (or replacements) custom fitted to my lugholes over the next week or 2). Just working up to using my new A&H CQ18T live so wondered whether the following might work well as I now have 8 Monitor Outputs - One monitor mix with "the Band, plus Ambient Mic" Another monitor mix for a specific Bass output. Combine the 2 Jack outputs using a lead taking 2 mono Jacks to an XLR connector - then Via XLR onto the Xvive Transmitter? I could pan the two channels if I need different balances or just change each channel volume?? If this isn't daft ....I'll give it a try over the next few days and report back! Thoughts?? Cheers Ian

That's a good shout, hadn't thought of that angle.

I guess with the Fazely stuff there's a chance that Bax's earlier financial problems might have disrupted the manufacturing process if they weren't able to pay the factory at any point.

As long as you have realistic expectations, you should be fine. Gigging with one of these is akin to a high powered 1x12 bass combo, such as the Markbass CMD121 mentioned above. If you can gig with one of those, you can gig with a high-powered 1x12 PA speaker. I gigged for several years with a Headrush 1x12 speaker without PA support, before going direct to PA with IEMs, and I used a markbass 1x12 cab with different heads before that.

Thanks Phil, THe IEM's are Shure SE215's - I'll start a thread .... I think I've found a way to do a specific EQ for the bass plus "The Band" into IEM mix. But could be completely wrong!!!!

I'd love to play in there, but it's a bit cramped for us and they don't really want covers bands. Ho hum.

Just chipped in. Wishing you all the best @lee650.

I've seen this around a couple of times and it's EXACTLY the kind of vintage bass I'd be after - one that's been messed around too much for a collector, but loved enough that it's been played a lot and worth customising. If I was still playing 4-string basses I'd love to have a go on it - could be a killer instrument. Or a mutt, but it'd be worth trying.

Our rehearsal space has Ashdown Rootmaster 500 heads through ABM 8x10 cabs. It's awesome.

This about honest ratings hits the mark. My tech friend says similar about how power is now rated at 1k, which isn't really honest low end. It requires more power to reproduce low end, so you get higher, impressive numbers.

My Beedster II:

Simple covers band board. A pedal snake covers all connections: instrument chain to amp, send and return loop and 9v power.

Nothing ventured, nothing gained, unless you think he's going to mug you and steal your bass if you go to a rehearsal.

UPDADE!!!! It's arrived with Bass Direct and they're sending it out today to be with me tomorrow! To say I'm excited is an understatement...